Greater London · E16
Air conditioning in E16
Air conditioning installation, repair, servicing and heat pumps in E16, from our base in East Grinstead.
Where we work in E16
- Canning Town
- Leamouth
- Custom House
- Limmo Peninsula
- Royal Docks
- Silvertown
- West Silvertown
- Plaistow
- Plumstead
- Woolwich
- Greengate
- Blackwall
- Cyprus
- New Charlton
- Beckton
- North Woolwich
Services in E16
- Air conditioning servicing
- Air conditioning installation
- Commercial air conditioning
- Heat pump installation
- Air conditioning repair
- All services
For a price, phone 07833 053749 or write to us at info@aircondoctor.co.uk.
Our air conditioning service in E16
A single-room split system is typically £1,200–£2,200 + VAT, two rooms on a multi-split £2,800–£4,500 + VAT, and three to five rooms £4,500–£8,500 + VAT. Those ranges include supply, installation, commissioning and F-Gas documentation, with commercial and VRF systems priced after a survey. Typical jobs include a portable unit with a hose out of the window and uncertainty over the right type and size of system, across multi-split systems, wall-mounted split systems and ceiling cassettes.
Refrigerant work is done by qualified engineers working for an F-Gas certified company, and electrical work is done by us as NICEIC approved contractors. So on the day, you don’t need a separate electrician for the electrical side. On site, it takes a day or more, depending on the number of rooms, the pipe routes and the access.
- First comes a site survey, or pictures and measurements for a straightforward job.
- The quote is fixed and shows the equipment, where each unit goes and what’s included.
- The indoor unit is fixed in place, the outside unit positioned, and the connecting runs put in tidily.
- The electrical supply is connected, and the refrigerant circuit is pressure tested and evacuated.
- The system is commissioned and checked in every mode, and we hand over the controls, F-Gas records and warranty information.
Pricing in E16
Homes, offices, shops and public buildings are all priced the same way: what’s needed, how we reach it, the parts and the labour. Call for a fixed-price quote and we will go through it with you.
Why book with us
- Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba and more
- 24/7 emergency line for breakdowns
- Clear warranty information from the manufacturer
- Covering London and the South East
Getting a price
To help us quote: where the property is and what kind of building it is, pictures of the rooms or units, the brand and model of anything already fitted and anything you’ve noticed, such as an error code or a noise. Then phone 07833 053749 or use the quote form.
Around Canning Town
Locally, jobs take us to houses, flats and workplaces close to Keir Hardie Park, The Tidal Basin Tavern and Rosetta Primary School and the streets around them. Also close by are St Cedd's Church (under half a mile north), Royal Docks Academy (0.5 miles south-east) and The Royal Docks Community School (0.5 miles south-east). There’s a railway station in Canning Town itself: Custom House station. A little further out are Greenwich Castle (2.8 miles south-west) and West Ham United Football Club Museum (1.4 miles north-east). The countryside around Canning Town includes Gilbert's Pit and Hollow Pond.
Air conditioning across E16
In E16, as across England, the same permitted development rules apply: an air-to-air system that heats as well as cools can be permitted development on a house, but cooling-only units, listed buildings and outdoor units facing a road in conservation areas need more care.
E16 is part of a working area that runs from Greater London to the Sussex coast and out to Oxfordshire and Essex. You reach the same people wherever you are in it.
Canning Town: With historic houses such as Queen's House about 2.7 miles south-west, it’s a reminder that older homes nearby may be listed, which changes the planning rules. If your home is in one of the older streets near St Cedd's Church, it’s worth checking whether it’s listed or in a conservation area before an install.
Let and managed properties
The F-gas rules share responsibility for leak checking between the equipment’s operator and the service technicians. In a let or managed building, it’s worth agreeing who that operator is, and we can work for either side.
Keeping records across a portfolio is half the battle. Each visit produces a dated record, with F-Gas records wherever refrigerant work is involved, so you can show what was done and when.
What affects the quote in E16
The quote reflects the job in front of us. We consider:
- What kind of system it is
- How many units are involved
- The brand, model and parts involved
- The condition of any existing system
What you pay reflects the actual work. That is why we look at the job first, from photos or on a survey, and the price is agreed before work begins.
Helping us quote
There’s no need for technical detail. It helps if you can send:
- Your consumer unit or fuse board
- The rating plate or label on any existing unit
- Where the outdoor unit is, or where you’d like it
- The address and the type of property
Some jobs can be priced from pictures, while others need a survey. Bigger systems, commercial sites and awkward pipe routes are normally surveyed on site. Either way, you get a fixed price before any work is booked.
Keeping the system healthy
Simple habits make a real difference. We recommend:
- Keep the room closed while it runs
- Have the system serviced once a year
- Avoid setting it far colder than you need
- Keep the F-Gas records, commissioning details and warranty information together
Questions after the installation go to the same number. Tell us what the system is doing, and any code on the display, and we will talk it through with you.
Book an annual service. The engineer cleans the coils and drain, checks the electrics and the refrigerant circuit and catches small problems early and keeps the warranty paperwork right where servicing is a condition.
Leave it or put it right?
Size matters more than brand. Too small, and it runs flat out without catching up; too big, and it switches on and off and wastes energy. Getting the sizing right at the survey stage avoids both problems.
Comparing quotes
- How VAT is shown, and which rate applies
- Exactly what the price includes, from supply and fitting to commissioning
- Whether you get F-Gas records where refrigerant is involved
- Whether the manufacturer’s warranty depends on regular servicing
Your questions about air conditioning in E16
Do you offer emergency call-outs?
Yes, 24/7. Call the emergency line and tell us the make, the symptoms and any error code, and we will talk you through the next steps.
Do you protect the property while you work?
We start with protection: dust sheets over floors and anything close to the work. Holes and fixings are agreed with you, and we clean up afterwards before we leave.
Can I have air conditioning in a flat?
That depends on the lease, the building and where the outdoor unit could go. An outdoor unit can sometimes go on a balcony, roof or rear wall, with consent, and we check the options on the survey. This is general information, not legal advice.
Can I fit air conditioning or a heat pump myself?
Not the refrigerant work. The F-gas rules require certified companies and qualified engineers for it, and a new circuit is notifiable under Part P unless a registered electrician, such as a NICEIC approved contractor, does it.
Do you work in E16?
Yes. We work in E16 and the rest of Greater London, within the London and South East area we cover. To book, give us a ring on 07833 053749 or use the quote form.
Is planning permission needed for the outdoor unit?
Not necessarily. Permitted development can cover a heat pump on a house, including an air-to-air system that heats as well as cools since 2025, provided the conditions are met. Cooling-only units, listed buildings, flats and road-facing spots in conservation areas are where it typically comes up, and we tell you at the survey. This is general information, not legal advice.
Where will you put the outdoor unit?
The position is agreed on the survey, not on the day. It needs space around it to breathe and room for an engineer to service it, and walls or roofs facing a road can raise planning questions. We explain the options and any permissions to check.