Oxfordshire · Heat pump installation

Air Source Heat Pumps in Walton Manor

Air source heat pumps in Walton Manor from an F-Gas certified company, with the manufacturer’s warranty terms explained on your quote. We reply to enquiries the same working day.

  • Working out where a cylinder could go
  • Deciding on the outdoor unit position
  • Questions about the Boiler Upgrade Scheme

Air source heat pumps in Walton Manor

Homes in Walton Manor and heat pumps

About 42% of homes in Walton Manor and the neighbourhoods around it were built before 1919, according to the Valuation Office Agency’s council tax figures, and the last census (2021) found about 45% of households live in flats. Older homes can lose heat faster, so a room-by-room heat loss calculation, and sometimes insulation or larger radiators, comes before sizing a heat pump. A flat may have no room for a hot water cylinder, and the freeholder normally has a say on the outdoor unit, which can tip the choice towards air-to-air.

If you live near Oxford station, the survey compares air-to-water and air-to-air for your home before anything is quoted.

Walton Manor is about 2 miles north-west of Oxford, in Oxfordshire. Whether you are in the middle of Walton Manor or further out, our engineers cover air source heat pumps, from a single room to a whole building. Count every place we list in Oxfordshire and you reach 443, with Walton Manor on the list. We also work in Guildford, around 47 miles away.

The A4144 pass through or close to Walton Manor, which keeps journeys to surveys and visits simple. Here we cover the OX2 and OX1 postcode area. We also cover Jericho (1 mile south), Park Town (1 mile north-east), Norham Manor (1 mile east), St John Street area (1 mile south) and North Oxford (1 mile north). Within a short drive, we also cover Didcot (11 miles south), Bicester (11 miles north-east), Abingdon-on-Thames (6 miles south) and Witney (10 miles west).

What’s near Walton Manor

In Walton Manor, that means homes and buildings near Oxford University Parks, Wychwood School and Oxford Academy, among other places. You’ll also find St Hugh's College Main Building Including Library (within half a mile north-east) and The Gardeners Arms (under half a mile south). The nearest railway station is Oxford station, roughly 0.7 miles south of the centre. Well-known places in the area include Oxford Castle (0.9 miles south) and Oxford University Press Museum (less than half a mile south). For a walk, there’s Hook Meadow and The Trap Grounds and Headington Hill.

Map of Walton Manor © OpenStreetMap contributors

About our air source heat pumps in Walton Manor

We install air source heat pumps in Walton Manor and across Oxfordshire, and we’re MCS certified. There are two kinds: air-to-water, which heats radiators or underfloor heating and your hot water, and air-to-air, which warms rooms through indoor units and can also cool. We’ll explain which type fits your home and why. Common call-outs are for planning and permitted development questions and replacing a combi boiler with a heat pump, on hot water cylinders, homes heated by oil, LPG or gas and air-to-water heat pumps.

Whether a home near Walton Manor has mains gas makes a difference to the grant. Homes heated by oil or LPG with no mains gas can get an extra £1,500 on the Boiler Upgrade Scheme until March 2027.

Some warranty terms depend on the system being serviced regularly by a qualified engineer. If that applies to your system, booking the service on time keeps the record straight and each visit is recorded.

Where
Walton Manor (OX2, OX1)
Region
Oxfordshire
Accreditations
F-Gas certified company, NICEIC approved, MCS
Quotes
A fixed-price quote up front
Guide price
£8,000–£16,000 before the grant, 0% VAT on homes
Telephone
07833 053749
Checked
30 October 2026

How we price air source heat pumps

You will get a fixed price before work begins. It takes into account:

  • How far the pipework has to run, and where
  • What state the existing equipment is in
  • How many units are involved

Our prices page shows typical ranges, but each job is priced on what it involves. For a fixed-price quote, phone 07833 053749 or drop us a line, and we will explain what it covers.

Asking for a quote

What to send for a quote:

  • The paperwork from the last service, if you have it
  • A short video of any fault, such as a noise or a flashing light
  • Your consumer unit or fuse board

The quickest way to a quote is to send photos: the room or the existing unit, the outside wall or roof where the outdoor unit sits or would go, and the label on any existing unit. Tell us the address and what you need, and simple jobs can often be priced without a visit.

Aftercare tips

Once we have finished, these simple steps help:

  • Use the settings explained at handover
  • Read the manufacturer’s warranty terms for your brand
  • Keep the MCS certificate with the manufacturer’s paperwork

Once commissioned, we register the installation with MCS and give you the certificate. Keep it with the manufacturer’s paperwork for future reference.

Keep insulation and draught-proofing in good order, as lower heat loss means the system has less to do.

Common problems we fix in Walton Manor

The Boiler Upgrade Scheme has made people ask whether their home could qualify. Eligibility depends on the property, the system and the scheme rules, so we check before you commit.

Customers typically contact us when they notice one of these:

  • Replacing a combi boiler with a heat pump
  • Deciding on the outdoor unit position
  • Moving away from fossil-fuel heating

With Holywell Manor about 1 mile south-east, it’s worth asking whether your own home is listed before planning a heat pump.

What to look for in a quote

  • Whether the company is F-Gas certified, and whether you can check it
  • The make and model of any parts or equipment being quoted
  • Whether testing, commissioning and paperwork are included

How to choose an air conditioning engineer

The process

Our engineers bring the tools, gauges and access equipment the job needs. All we ask is clear access to the units, or to where they’ll go, and to the consumer unit. On site, the work takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. Visits to a place like Walton Manor are planned ahead, so we arrive with what the job needs.

  1. You tell us about the home and what you want from a heat pump.
  2. The survey checks heat loss, emitters, hot water and the outdoor unit position.
  3. We recommend air-to-water or air-to-air and check the grant position.
  4. Installation follows on the agreed dates.
  5. We commission it, complete the MCS certificate and show you how to use it.

Getting ready for the visit

  • Tell us about access, such as roof hatches, high walls or locked plant areas
  • Keep pets and children away from the work area
  • Let us know where we can park and unload

Getting a price

Getting a quote is straightforward. Call or email with a few details and we will come back to you the same working day. Where a survey is needed, we arrange a time that suits you.

Get a quick quote

Advice

FAQs for Walton Manor

Will you come out to Walton Manor?

We do. Villages and hamlets get the same service as the bigger towns. We’re based in East Grinstead and plan each visit so the job can be finished in one trip where possible.

Is a heat pump in Walton Manor permitted development?

The answer turns on the property and where the outdoor unit would sit. Central Walton Manor sits inside the North Oxford Victorian Suburb Conservation Area. On a house, an air source heat pump can often go ahead under permitted development, with an outdoor unit of no more than 1.5 cubic metres and an installation that meets MCS 020(a), which includes a noise check. Those rights do not reach the grounds of a listed building, and conservation areas rule out walls or roofs facing a road. If that might affect you, we ask the planning department at Oxford City council, normally the authority for Walton Manor.

Which accreditations do you hold?

F-Gas company certification, NICEIC approval for electrical work and MCS certification for heat pumps, and we’re Checkatrade members. Engineers who handle refrigerant hold their own F-gas qualifications as well.

Is there a Boiler Upgrade Scheme grant for air-to-air?

The scheme offers £2,500 for air-to-air, but the conditions are strict. Adding air-to-air alongside a boiler doesn’t qualify as it has to meet the full heating demand.

Which brands do you work with?

Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries, Hitachi and others. For a new system, we suggest the make and model that suit the property and tell you why.

Can we book visits on a schedule?

Yes. Send details of the systems and how they’re used and we will propose a schedule and quote for it. That can include the leak checks the F-gas rules require for larger systems.

How soon will you get back to me?

On the same working day you contact us. Then we agree a date that works for you, and you get a fixed price before any work goes ahead.

A customer’s words

“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”

David W., Haywards Heath

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead