Oxfordshire · Heat pump installation
Abingdon-on-Thames air source heat pumps
We cover Abingdon-on-Thames for MCS certified installation of air source heat pumps for heating and hot water, with the Boiler Upgrade Scheme grant applied for. A look at the job first, a fixed-price quote and written records at the end.
- Moving away from fossil-fuel heating
- Questions about where the outdoor unit can go
- Planning and permitted development questions
Air source heat pumps in Abingdon-on-Thames
We begin with a room-by-room heat loss survey. It shows how much heat each room needs on a cold day, so the heat pump and the radiators or indoor units can be sized properly. Guesswork leads to systems that are too big or too small. If the problem is checking eligibility for a heat pump grant and questions about where the outdoor unit can go, we can sort it out.
Houses in Abingdon-on-Thames normally have room for an outdoor unit at the side or rear, and the position has to pass the MCS planning standard’s noise check to count as permitted development.
If a fault appears while the equipment is under the manufacturer’s warranty, tell us the make, model and installation date. We will explain how the manufacturer’s terms are likely to apply before anything chargeable is done.
- Location
- Abingdon-on-Thames (OX14)
- Wider area
- Oxfordshire
- Guide price
- £8,000–£16,000 (0% VAT on homes), before the grant
- Accreditations
- F-Gas certified, NICEIC approved, MCS
- Quote
- A fixed-price quote up front
- Call
- 07833 053749
- Last updated
- 30 October 2026
What affects the quote in Abingdon-on-Thames
The price is fixed before any work begins. It’s based on:
- Which make and model is being fitted or worked on
- The condition of any existing system
- One-off work versus a regular service cycle
Whatever the property, the quote works the same way: what’s needed, how we reach it, the parts and the labour. Call for a fixed-price quote and we will go through it with you.
What to send for a quote
Photos and a few facts are often enough to price a simple job. Useful things to send:
- Where the property is and what kind of building it is
- Wide photos of the room or the existing unit
- The fuse board and where it is in the property
To get a fixed-price quote, phone us on 07833 053749 and tell us about the property and what you need. Photos help a lot. We reply to enquiries the same working day.
Towns and villages near Abingdon-on-Thames
Also in Abingdon-on-Thames
How the visit works
Think of the visit in three stages: diagnose, treat and sign off. First we check the system or the space against the plan, then the work itself, and finally everything is tested, recorded and explained. The middle part takes longest, which takes a few days on site, depending on the cylinder, the radiators and the pipework involved. Access to the outdoor unit position is the main thing to tell us about in Abingdon-on-Thames.
- You tell us about the home and what you want from a heat pump.
- The survey checks heat loss, emitters, hot water and the outdoor unit position.
- You get our view on the right type for the house, and on whether the Boiler Upgrade Scheme applies.
- The system is installed and connected to the controls.
- We commission it, complete the MCS certificate and show you how to use it.
Preparing for the visit
- Name a contact who can meet us at the agreed time
- Clear the space around the indoor unit, or where it will go
- Plan for pets to be kept clear during the visit
Getting a quote
Here’s what helps us quote: the address and the type of property, a few pictures, the make and model of any existing system and any symptoms, from error codes to drips. Then phone 07833 053749 or fill in the contact form.
Related advice
Heat pumps in Abingdon-on-Thames: local notes
At about 52 miles from central London, Abingdon-on-Thames sits inside the area we cover across London and the South East.
With Clifton Hampden Manor about 3.5 miles south-east, it’s worth asking whether your own home is listed before planning a heat pump. Older homes near Christ Church may need extra checks for planning and heat loss before a heat pump is designed.
Abingdon-on-Thames is about 6 miles south-west of Oxford, in Oxfordshire. We cover Abingdon-on-Thames for air source heat pumps and across the rest of Oxfordshire. We cover 443 places across Oxfordshire, large and small. Our Guildford page covers places nearby, about 43 miles away.
Here we cover the OX14 postcode area. Abingdon-on-Thames is one of the larger places we cover in Oxfordshire. Places around Abingdon-on-Thames that are also on our list: Caldecott (1 mile south), Radley (2 miles north-east), Culham (2 miles south-east), Sutton Courtenay (3 miles south) and Appleford-on-Thames (3 miles south-east). We also work in nearby towns such as Oxford (6 miles north-east), Didcot (5 miles south), Witney (12 miles north-west) and Carterton (15 miles north-west).
Landmarks near Abingdon-on-Thames
Around Abingdon-on-Thames, our work takes us to homes and businesses near John Mason School, The Spread Eagle Public House and School of St Helen and St Katharine, among other places. The closest station to Abingdon-on-Thames is Radley station, about 1.9 miles east. Well-known places in the area include Pendon Museum (3.9 miles south-east) and Abingdon Community Hospital (1 mile south-west). Green spaces nearby include Dry Sandford Pit and Harcourt Hill.
Questions from Abingdon-on-Thames
Can I fit a heat pump in Abingdon-on-Thames without planning permission?
It depends on the property. Central Abingdon-on-Thames is a short walk from the Abingdon Northcourt Conservation Area. The permitted development rules for heat pumps leave out listed buildings and stop outdoor units going on road-facing walls or roofs in conservation areas. Anything outside the rules needs an application, and we raise it with the local planning authority (for Abingdon-on-Thames, normally Vale of White Horse council) first.
Can I get the Boiler Upgrade Scheme grant in Abingdon-on-Thames?
Yes, if the home and the heat pump meet the scheme’s rules: Abingdon-on-Thames is in England, where it applies. For an air-to-water heat pump the amount is £7,500; an air-to-air system can get £2,500 if it replaces the fossil-fuel heating outright, meets the home’s full heating demand and is not an add-on to a boiler. The installer applies, and we are MCS certified.
How much time does a heat pump install need?
Expect it to take several days for an air-to-water system with a new cylinder, less for an air-to-air system. How much of the heating changes decides most of the time, and we confirm the timing with your quote.
Will skipping a service affect the warranty?
It depends on the manufacturer’s terms. Some warranty terms require the system to be serviced regularly by a qualified engineer, so it’s worth checking. Keep every service record either way.
Do you work on systems someone else installed?
Yes. We work on systems fitted by other installers as well as our own, on all the main brands. Tell us the make and model and send any paperwork you have.
Are my radiators big enough for a heat pump?
It varies from room to room. We check them all during the survey, so the quote covers any changes.
Do you protect the property while you work?
Floors and furniture near the work are covered with dust sheets before we start, and the area is kept tidy throughout. At the end, we clear up and show you what we’ve done.
What air source heat pumps can’t fix
A few issues sit outside what this work can do:
- Formal advice on VAT for your situation
- A grant for a home that doesn’t meet the scheme rules
- Draught-proofing and insulation upgrades
If you’re not sure, just call 07833 053749 or drop us a line and we’ll give you a straight answer before you book.
What we work on in Abingdon-on-Thames
- Air-to-air heat pumps
- Homes heated by oil, LPG or gas
- Hot water cylinders
- Underfloor heating
- Air-to-water heat pumps
- Radiator systems
What the work involves, system by system
Radiators and underfloor heating
Heat pumps run at lower flow temperatures, so radiators may need to be larger so we check them against each room’s heat loss.
Air-to-air heat pumps
An air-to-air system heats rooms directly and can also provide cooling. Hot water needs a separate source, so that has to come from elsewhere.
What a customer said
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager