Surrey · Heat pump installation
Heat pump installers in Wanborough
Need air source heat pumps in Wanborough? We look at the job first, give you a fixed-price quote and do the work at a time that suits you, finishing with proper records.
- Working out where a cylinder could go
- Working out whether radiators need upsizing
- Checking whether planning permission is needed
Air source heat pumps for homes and businesses in Wanborough
Air source heat pumps collect heat from outdoor air and bring it inside, using electricity to drive the process. The technology is close to air conditioning, which is why we install both, and air-to-air heat pumps are sometimes simply called air conditioning. If you’re dealing with questions about the Boiler Upgrade Scheme and finding a place for the outdoor unit, we can sort it out.
In a place like Wanborough, some homes are listed, because permitted development doesn’t apply within the grounds of a listed building, so we check consent first.
Warranty on the equipment is the manufacturer’s own, on the manufacturer’s terms, and we set them out on your quote. Terms differ from brand to brand, so we go through them with you rather than leave you to find the small print.
- Place
- Wanborough (GU3)
- Wider area
- Surrey
- Replies
- On the working day you ask
- Certified
- NICEIC and F-Gas, MCS
- Typical price
- £8,000–£16,000 before the grant, 0% VAT on homes
- Pricing
- Fixed, in writing
- Phone
- 07833 053749
- Reviewed
- 30 October 2026
Wanborough questions
Will you come out to Wanborough?
Yes, smaller places are covered as well as towns. Send a few details and pictures, and we reply the same working day.
Does the Boiler Upgrade Scheme cover homes in Wanborough?
Yes, if the home and the heat pump meet the scheme’s rules: Wanborough is in England, where it applies. The amount depends on the type of heat pump, and the survey confirms which applies. As an MCS certified installer, we apply for it on your behalf.
How much time does a heat pump install need?
Expect it to take anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. The cylinder, the radiators and the pipework make the biggest difference and the timing is set out with your quote.
Will I get records for the system?
Yes, on every job. A new system comes with commissioning details, F-Gas records and the manufacturer’s warranty information, while repairs and services get a written note of what was found and done.
Can landlords and managing agents book you?
Yes. Homeowners, landlords, agents and businesses all book us in Wanborough and across Surrey. Let us know who the records should go to.
Which type of heat pump is right for my home?
Air-to-water replaces the boiler for heating and hot water, while air-to-air heats and cools rooms. The survey helps decide. We install both types.
Can I do the refrigerant work myself?
The refrigerant side has to be done by a qualified engineer working for an F-Gas certified company. That’s a legal requirement, and it also matters for the manufacturer’s warranty. We are happy to quote for the full job, supply to commissioning.
Also near Wanborough
What else we do in Wanborough
Keeping the system healthy
Every system needs looking after, and most of it is easy. A few tips:
- Diary the next service
- Keep the MCS certificate with the manufacturer’s paperwork
- Check eligibility for the Boiler Upgrade Scheme early
If anything does not seem right after installation, give us a ring on 07833 053749 or write to us at info@aircondoctor.co.uk and we will look into it. Annual servicing helps keep the system working well.
A well-insulated home helps a heat pump, as lower heat loss means the system has less to do.
Heat pumps in Wanborough: local notes
The middle of Wanborough is part of the Wanborough Conservation Area. There are 2 conservation areas within a mile of the centre of Wanborough. About 7 listed entries lie within half a mile of central Wanborough, Church of St Bartholomew (grade I) among them. For a heat pump, permitted development doesn’t apply within the grounds of a listed building, and in a conservation area the outdoor unit can’t go on a wall or roof facing a road, so we check with the local planning authority (typically Guildford council) where needed. About 46% of homes across Wanborough and its surrounding area date from 1945 to 1972, according to VOA council tax data, and about 71% of households live in detached or semi-detached houses, according to Census 2021 figures. For homes of that age, the survey checks the insulation, the radiators and the hot water setup. Houses normally have space for an outdoor unit and a hot water cylinder.
For a home near Wanborough station, the survey looks at whether an air-to-water or air-to-air heat pump suits better. If your home is listed, like Wanborough Manor about 0.1 miles east, listed building consent comes before any heat pump work.
Wanborough is about 4 miles west of Guildford, in Surrey. Across the GU3 area, we can help with air source heat pumps. We cover 395 places across Surrey, from busy centres to quieter spots.
Not far from Wanborough, a recent job of ours was on Bridge Road, Godalming (GU7), about 4 miles south-east: installing a Panasonic split system in the garden office and a second unit in the master bedroom.
Our working area takes in GU3, every street of it. Close to Wanborough, our area also takes in Christmas Pie (1 mile north-west), Flexford (1 mile north-west), Puttenham (1 mile south-west), Normandy (2 miles north) and Willey Green (2 miles north). Within a short drive, we also cover Guildford (4 miles east), Woking (7 miles north-east), Camberley (8 miles north) and Farnham (6 miles west).
Landmarks near Wanborough
Typical jobs here are in properties near Pucks Oak Barn and McAlmont Reserves and The Good Intent pub and the streets around them. The nearest railway station is Wanborough station, roughly 0.9 miles north. Other landmarks nearby include Guildford Castle (4 miles east) and Guildford Hospital (2.4 miles east). Not far away are Ash Ranges and Lower Lake.
How we price air source heat pumps
Every job gets its own quote. These are the things that affect it:
- One-off work versus a regular service cycle
- How far the pipework has to run, and where
- What electrical work the job needs
One room or a whole building, we price it on the same basis: what needs doing, how we get to it and what it needs. You will have a fixed price before any work starts, with VAT shown clearly.
Asking for a quote
What to send for a quote:
- The rating plate or label on any existing unit
- A few pictures of the room and the wall the unit is on, or will go on
- The address and the type of property
Here’s what helps us quote: the address and the type of property, a few photos, the brand and model of anything already fitted and any symptoms, from error codes to drips. Once you have those, ring us on 07833 053749 or email us.
What the work involves, system by system
Radiators and underfloor heating
If radiators need upsizing, the quote lists them, so you know the full scope.
Air-to-water heat pumps
An air-to-water heat pump heats water for your radiators or underfloor heating and your hot water cylinder. It takes over from the boiler and we install it to MCS standards.
How the visit works
We keep the work area tidy as we go, with dust sheets down and offcuts and packaging cleared up. Any holes, fixings or cable routes are agreed with you before we drill. The visit takes from a couple of days to around a week, depending on the system and how much of the heating changes. We agree a date with you and plan the visit to Wanborough so we arrive with what’s needed.
- First we find out about the property, the heating you have now and what you’re hoping for.
- We survey the home room by room for heat loss, and check the emitters, hot water and outdoor unit position.
- A fixed-price quote follows, setting out the system, any grant that applies and the VAT.
- Installation covers the outdoor unit, the indoor connections and the controls.
- Commissioning, MCS certification and a handover of the controls finish the job.
Preparing for the visit
- Make sure we can reach the consumer unit or fuse board
- Mention any managing agent or landlord rules we need to follow
- Have the make and model of any existing unit to hand
Getting a quote
Our prices page gives typical ranges, but your quote is based on your job, because no two buildings, rooms or systems are the same. After a look at the job, by photos or a survey, the price is fixed. To get going, phone 07833 053749 or email us.
Advice
What a customer said
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath