Surrey · Heat pump installation

Air Source Heat Pumps in Runfold

MCS certified installation of air source heat pumps for heating and hot water, with the boiler upgrade scheme grant applied for, for Runfold and the surrounding area. Ask us for a fixed-price quote, and we will reply the same working day.

  • Questions about the Boiler Upgrade Scheme
  • Comparing heat pump types
  • Questions about where the outdoor unit can go

Need air source heat pumps in Runfold?

What happens on the day

Think of the visit in three stages: look, put right and sign off. First we check the system or the space against the plan, then we do the work, and finally everything is tested, recorded and explained. Most of the time goes on the middle part, which takes a few days for most air-to-water installations, with air-to-air systems often quicker. Photos of the room and the outside of the property help us plan a visit to Runfold.

  1. It starts with a conversation about the home, the existing heating and your plans.
  2. On the visit we calculate what every room loses on a cold day, then check the radiators, room for a cylinder and outdoor unit options.
  3. We send a fixed-price quote that shows the equipment, the grant position and the VAT.
  4. Installation covers the outdoor unit, the indoor connections and the controls.
  5. We commission the heat pump, complete the MCS paperwork and talk you through the controls.

Preparing for the visit

  • Name a contact who can meet us at the agreed time
  • Mention any parking restrictions near the property
  • Plan for pets to be kept clear during the visit

Get a fixed-price quote

The quickest way to a quote is to send pictures: the room or the existing unit, the outside wall or roof where the outdoor unit sits or would go, and the label on any existing unit. Tell us the address and what you need, and simple jobs can often be priced without a visit.

Get a quick quote

Advice

About our air source heat pumps in Runfold

An air-to-water heat pump heats water to a lower temperature than a typical boiler which means some radiators may need upsizing. The survey shows which rooms are fine and which need changes, and the quote sets it out. If you’re dealing with checking eligibility for a heat pump grant and ageing boilers that will need replacing, we can sort it out.

In a place like Runfold, some homes are listed, because permitted development doesn’t apply within the grounds of a listed building, so we check consent first.

Think of the paperwork as the system’s health record: a dated account of the work and the readings we took. It makes the next visit quicker and any warranty question simpler and it’s worth keeping safe.

Place
Runfold (GU10, GU9)
Wider area
Surrey
Price guide
Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
Approvals
F-Gas certified, NICEIC approved, MCS
Price
A fixed price before we start
Call
07833 053749
Updated
30 October 2026

What you can do yourself, and what needs us

Leave the units and pipework where they are. Disconnecting a system means dealing with refrigerant, which only a qualified engineer can do, and the electrical side needs a competent person. Ask us to quote for a move instead.

For air conditioning, cleaning the indoor unit’s filters is the main job owners can do, if the manual says so. They come out, get a gentle clean and go back only when they’re dry. On a heat pump, the equivalent is keeping the outdoor unit clear and checking the controls.

What air conditioning won’t do

Air source heat pumps cannot fix everything, and we’d rather say so up front. It doesn’t solve:

  • Gas boiler work, such as disconnecting the old boiler, which needs a Gas Safe registered engineer
  • Tax advice on your own circumstances
  • Grants for hybrid systems or replacements of low-carbon systems

If you’re not sure, just give us a ring on 07833 053749 or email us and we will give you a straight answer before booking.

What the work covers

  • Air-to-water heat pumps
  • Radiator systems
  • Homes heated by oil, LPG or gas
  • Air-to-air heat pumps
  • Underfloor heating
  • Hot water cylinders

What affects the quote in Runfold

The quote reflects the job in front of us. We consider:

  • How many units are involved
  • How far the pipework has to run, and where
  • What electrical work the job needs

What you pay reflects the actual work. That is why we look at the job first, from pictures or on a survey, and why the quote is fixed before any work starts.

What to send for a quote

Simple jobs can often be priced from photos and some basics. Send what you can of the following:

  • Wide pictures of the room or the existing unit
  • The outside wall, roof or yard where the outdoor unit sits or would go
  • A short video of any fault, such as a noise or a flashing light

Quoting starts with a diagnosis, either on a site survey or, for simple jobs, from your pictures and details. Then you get a fixed price before any work starts.

Heat pumps in Runfold: local notes

About 80% of households live in detached or semi-detached houses, according to Census 2021 figures. Houses typically have space for an outdoor unit and a hot water cylinder. About 35 miles out from central London, Runfold is part of the South East area we work across.

Farnham Castle, roughly 2.2 miles west, is a reminder to check your home’s listing status: permitted development doesn’t cover listed buildings. Live in one of the older houses around The Church of the Good Shepherd? Expect the survey to look closely at heat loss and at the building’s planning status.

Runfold is about 2 miles east of Farnham, in Surrey. We cover Runfold for air source heat pumps and across the rest of Surrey. Count every place we list in Surrey and you reach 395, with Runfold on the list. The nearest of our city pages is Guildford, around 8 miles from Runfold.

Our nearest recent job to Runfold was on Castle Street, Farnham (GU9), about 2 miles west: installing a Fujitsu multi-split system serving three offices and a client meeting room.

Postcode districts we cover here: GU10 and GU9. Whether you’re on Greenacres, Crooksbury Road and Compton Way or a nearby road, our engineers can take on the work. If you are just outside Runfold, we cover Compton (1 mile west), The Sands (1 mile east), Sandy Cross (1 mile north-east), Badshot Lea (1 mile north) and Seale (2 miles north-east). Within a short drive, we also cover Guildford (8 miles east), Woking (11 miles north-east), Camberley (9 miles north) and Frimley (7 miles north).

Around Runfold

Around Runfold, our work takes us to homes and businesses near Crooksbury Hill. The closest station to Runfold is Farnham station, roughly 1.7 miles west of the centre. Well-known places in the area include Farnham Castle (2.2 miles west) and Museum of Farnham (2.2 miles west). The countryside around Runfold includes Culverswell Hill and Aunt's Pool.

Map of Runfold © OpenStreetMap contributors

Your questions about air source heat pumps in Runfold

Do you cover Runfold for air source heat pumps?

Yes. Runfold is one of the places we cover. Get in touch with the details and we reply the same working day.

Is the heat pump grant available in Runfold?

Yes, the scheme covers homes in England, including Runfold, if they qualify. The amount depends on the type of heat pump, and the survey confirms which applies. As an MCS certified installer, we apply for it on your behalf.

Do you work on all makes?

The main ones, including Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. For new systems, we recommend a brand and model to suit the job and explain why.

Will I get records for the system?

Yes. You get a written record of each visit, and any work on the refrigerant circuit goes in the F-Gas records. File them with the system’s paperwork.

Will my radiators work with a heat pump?

We find out during the survey. Where a radiator is already large enough, it stays and any changes are in the quote.

Which accreditations do you hold?

We are an F-Gas certified company, NICEIC approved for electrical work and MCS certified for heat pumps. We are also Checkatrade members.

How much does an air source heat pump cost?

For air-to-water, the price is £8,000–£16,000 (0% VAT on homes) before any grant. Eligible homes in England and Wales can get £7,500 through the Boiler Upgrade Scheme, and we confirm eligibility before you commit.

What a customer said

“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”

David W., Haywards Heath

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead