Hampshire · Heat pump installation

Heat pump installers in Ringwood

Expert air source heat pumps for Ringwood: a survey or diagnosis, a fixed price, careful work and proper paperwork. Ask us for a fixed-price quote.

  • Questions about the Boiler Upgrade Scheme
  • Ageing boilers that will need replacing
  • Replacing a combi boiler with a heat pump

Air source heat pumps in Ringwood and nearby

The process

The visit goes in the diary at a time that works for you, and we let you know if plans need to move. On arrival, the engineer compares the job with the survey, your pictures or the details you gave us. Anything unexpected is raised with you before we go further. After that, it takes a few days on site, depending on the cylinder, the radiators and the pipework involved. Photos of the existing unit and its label help with repairs and servicing near Ringwood.

  1. First, a chat about the property and your goals for the heating.
  2. We survey for heat loss and look at radiators, cylinder space and outdoor unit options.
  3. We recommend air-to-water or air-to-air and check the grant position.
  4. The system is installed and connected to the controls.
  5. The job ends with commissioning, the MCS certificate and a walk through the controls.

Preparing for the visit

  • Mention any parking restrictions near the property
  • Clear a path to the units and the space around them
  • Let us know where the consumer unit is

Getting a price

If you need air source heat pumps in Ringwood, ring 07833 053749 or send an email. Let us know the type of property and what you need, plus some photos if they’re to hand. We reply the same working day.

Get a quick quote

Advice

Air source heat pumps in Ringwood, done properly

Every installation starts with a heat loss survey. It shows how much heat each room needs on a cold day, so the heat pump and the radiators or indoor units can be sized properly. Guesswork leads to systems that are too big or too small. Common call-outs are for plans to switch to electric heating with a heat pump and not knowing whether a grant applies, on air-to-water heat pumps, radiator systems and underfloor heating.

Older homes around Ringwood can be draughty or have solid walls, which a heat loss calculation will show. Sometimes insulation first is the better investment.

Think of the paperwork as the system’s health record: what was fitted or found, what was done and when. If anything goes wrong later, it helps the next engineer and the manufacturer and it’s worth keeping safe.

Place
Ringwood (BH24)
Region
Hampshire
Costs
Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
Replies
Same working day
Approvals
NICEIC approved, F-Gas certified, MCS
Quotes
A fixed price before work begins
Phone
07833 053749
Reviewed
30 October 2026

What affects the cost of air source heat pumps

Our prices page gives typical ranges, but every job is priced on its own. What we look at:

  • How many units are involved
  • What we find on the survey or diagnosis
  • The equipment or parts the job needs

One room or a whole building, the quote is built the same way: what needs doing, how we get to it and what it needs. You will have a fixed price before any work starts, and the quote sets out the VAT.

What to send for a quote

Before you ask for a quote, gather:

  • The outside wall, roof or yard where the outdoor unit sits or would go
  • Where the property is and what kind of building it is
  • The paperwork from the last service, if you have it

Quoting starts with a diagnosis, from a site survey or, where the job is straightforward, from photos and measurements. Then you get a fixed price before any work starts.

Let and managed properties

We work for landlords, letting agents and managing agents as well as homeowners and businesses. Let us know who will give us access and who the records should go to, and we will keep everyone informed.

Whether it’s one property or many, you get the same standard: a look at the job first, a fixed-price quote, work booked with the occupier and written records afterwards.

Air source heat pumps in Ringwood: the local picture

The 2021 Census found about 68% of households in detached or semi-detached houses. Detached and semi-detached houses normally have room for the outdoor unit and a cylinder.

If your home is one of the older properties near Trinity Congregational Church, the survey checks whether it’s listed or in a conservation area before the outdoor unit position is chosen. If your home is listed, like Avon Tyrrell House about 3.6 miles south-east, listed building consent comes before any heat pump work.

Ringwood is in Hampshire. Across the BH24 area, we cover air source heat pumps. Across Hampshire, we cover 683 places, and Ringwood is one of them. You can also see our page for Guildford, about 59 miles away.

Postcode districts we cover here: BH24. Being close to the A31 and A338, Ringwood is easy for our engineers to reach for visits of every kind. Other places close to Ringwood include Poulner (1 mile north-east), Hightown (1 mile south-east), Upper Kingston (1 mile south), Blashford (1 mile north) and Crow (1 mile south-east). Within a short drive, we also cover Totton (13 miles east), Lymington (12 miles south-east), New Milton (8 miles south-east) and Barton on Sea (9 miles south-east).

What’s near Ringwood

Around Ringwood, our work takes us to homes and businesses near Ringwood Church of England Infant School, The Lamb Inn and Avon Heath Country Park, among other places. Well-known places in the area include St Leonard's Hospital (3.9 miles south-west). For a walk, there’s Blashford Lakes and Linbrook Lake.

Map of Ringwood © OpenStreetMap contributors

What happens if it’s left?

The extra £1,500 for homes heated by oil or LPG with no mains gas is available until March 2027. For homes that qualify, that is a reason to look into it now. For a place like Ringwood, booking ahead lets us plan the visit properly.

Homes, offices, shops and public buildings are all priced the same way: what’s needed, how we reach it, the parts and the labour. Ask for a fixed-price quote and we’ll explain each part.

Why us?

  • Every job looked at before it’s priced
  • Clear warranty information from the manufacturer
  • Leading brands including Daikin, Mitsubishi Electric and Fujitsu
  • Enquiries answered the same working day

Take a look at what air conditioning costs and our accreditations.

FAQs for Ringwood

Can I fit a heat pump in Ringwood without planning permission?

There’s no single answer: the building and the outdoor unit position decide it. There’s a conservation area, the Ringwood Conservation Area, close to central Ringwood. On a house, an air source heat pump can often go ahead under permitted development, with an outdoor unit of no more than 1.5 cubic metres and an installation that meets MCS 020(a), which includes a noise check. Those rights don’t reach the grounds of a listed building, and conservation areas rule out walls or roofs facing a road. If that might affect you, we ask the planning department at New Forest council, typically the authority for Ringwood.

Can I get the Boiler Upgrade Scheme grant in Ringwood?

Ringwood is covered, as the scheme runs across England and Wales. Whether your home qualifies, and for how much, depends on the type of heat pump and the heating it replaces. We hold MCS certification, so the application is ours to make for you.

How long will it take to install a heat pump?

Expect it to take a few days on site, depending on the cylinder, the radiators and the pipework involved. How much of the heating changes decides most of the time and the timing is set out with your quote.

Do you work on systems someone else installed?

Yes. We work on systems fitted by other installers as well as our own from all the leading brands. Tell us the make and model and send any paperwork you have.

Is the equipment covered by a warranty?

Warranty is the manufacturer’s own, on its terms. Each brand sets its own conditions and periods, so we explain them on your quote.

How much does an air source heat pump cost?

Expect £8,000–£16,000 for an air-to-water system, with 0% VAT on homes, before the grant is taken off. The heat pump size, radiator changes and the cylinder decide where in that range you are. Air-to-air is priced after a survey.

Does servicing affect my warranty?

Check the manufacturer’s terms. Some manufacturers make regular servicing by a qualified engineer a condition of the warranty, so it’s worth checking. Either way, keep a record of every service.

A customer’s words

“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”

James T., Crawley, office manager

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead