Hampshire · Heat pump installation
Heat pump installers in Crow
Air source heat pumps for Crow, from F-Gas certified engineers, with warranty terms explained brand by brand. Enquiries answered the same working day.
- Replacing a combi boiler with a heat pump
- Planning and permitted development questions
- Moving away from fossil-fuel heating
Air source heat pumps in Crow
A heat pump takes heat from the outside air and moves it into your home, using electricity to drive the process. It works on the same principle as air conditioning, run the other way and the Energy Saving Trust notes that air-to-air heat pumps are sometimes referred to as air conditioning. The work covers homes heated by oil, LPG or gas, hot water cylinders and underfloor heating, and the jobs we see most are checking eligibility for a heat pump grant and finding a place for the outdoor unit.
Older and listed homes in villages like Crow need extra care, because permitted development does not apply within the grounds of a listed building, so we check consent first.
The records are your system’s health record: a dated account of the work and the readings we took. If anything goes wrong later, it helps the next engineer and the manufacturer, so keep it safe.
- Place
- Crow (BH24)
- Wider area
- Hampshire
- Typical price
- £8,000–£16,000 before the grant, 0% VAT on homes
- Certified
- F-Gas certified company, NICEIC approved, MCS
- Quote
- Fixed-price quote after a site survey
- Call
- 07833 053749
- Page updated
- 30 October 2026
Fixed-price quotes for air source heat pumps in Crow
Before we fix a price, we need to know a few things. We look at:
- Whether it’s a simple split or a larger system
- Access, including height, roofs and ladders
- What state the existing equipment is in
What you pay depends on the system and the number of rooms or units, how easy the units are to reach and the parts and time the job needs. You get a fixed price before work begins, so you know where you stand.
Asking for a quote
Good photos often save a visit. The most useful are:
- The remote or wall controller showing any error
- The paperwork from the last service, if you have it
- Where the property is and what kind of building it is
If you need air source heat pumps in Crow, call 07833 053749 or drop us a line. Tell us what kind of property it is and what you’d like done, and send a few pictures if you can. We reply the same working day.
Other services in Crow
Questions from Crow
Is Crow within the area you cover?
We do. Villages and hamlets get the same service as the bigger towns. A few pictures and the postcode are enough to get things started.
Does the Boiler Upgrade Scheme cover homes in Crow?
Yes, if the home and the heat pump meet the scheme’s rules: Crow is in England, where it applies. Air-to-water and ground source systems attract £7,500. Air-to-air gets £2,500, but only where it takes over from fossil-fuel heating and covers the whole home’s heating demand. We hold MCS certification, so the application is ours to make for you.
Do you look at the job first?
Yes. For simple jobs, pictures and a few details can be enough, while larger systems and faults that need testing are seen on site.
Which accreditations do you hold?
We hold F-Gas company certification, which the law requires for any business working on refrigerant. NICEIC approval, MCS certification for heat pumps and Checkatrade membership sit alongside it.
Do I need to service the system to keep the warranty?
It depends on the manufacturer’s terms. Some warranty terms require the system to be serviced regularly by a qualified engineer, so it’s worth checking. Keep every service record either way.
Is a heat pump permitted development?
Often not in England, as many heat pumps on houses are permitted development provided the conditions are met. These include an outdoor unit of no more than 1.5 m³, compliance with MCS 020(a), not being used solely for cooling and not being within the curtilage of a listed building.
Do you work on systems someone else installed?
Yes. Systems fitted by other companies are fine, on all the main brands. Send us the make and model, and any records you have.
Homes in Crow and heat pumps
We work across London and the South East, and Crow is part of that.
Sizing comes from the heat each room loses on a cold day, not from the size of the old boiler. With Avon Tyrrell House about 2.4 miles south-east, it’s worth asking whether your own home is listed before planning a heat pump.
Crow is in Hampshire. If you need air source heat pumps in Crow, please call 07833 053749 or fill in the contact form for a fixed-price quote. We work across London and the South East, including Crow. Our Hampshire coverage runs to 683 places, and Crow is one of them. You can also see our page for Worthing, roughly 59 miles from Crow.
If your postcode is in BH24, you’re inside the area we cover. Our engineers work on Barrack Lane, Wood End Road and Crow Lane and the roads around them. If you’re just outside Crow, we cover Upper Kingston (1 mile west), Hightown (1 mile north), Bagnum (1 mile south), Ringwood (1 mile north-west) and Poulner (1 mile north). Further out, we also cover Totton (13 miles north-east), Lymington (11 miles south-east), New Milton (7 miles south-east) and Barton on Sea (8 miles south-east).
What’s near Crow
Typical jobs here are in properties near Ringwood School and The Elm Tree Inn, among other places. Nearby you’ll also find St Leonard's Hospital (4.3 miles west). Green spaces nearby include Blashford Lakes and Linbrook Lake.
For landlords and property managers
Whether it’s one property or many, you get the same standard: diagnosis, a fixed price, access agreed with the people on site and paperwork at the end.
When the building owner and the occupier are different, it’s worth checking the agreement for who looks after the system. We can quote either party and send the records to whoever needs them.
What air conditioning will not do
A few issues sit outside what this work can do:
- Gas boiler work, such as disconnecting the old boiler, which needs a Gas Safe registered engineer
- Insulation work, such as loft or cavity wall insulation
- Getting planning permission or listed building consent on your behalf
Not sure which it is? You can call us on 07833 053749, or email if that’s easier and we’ll tell you honestly.
What the work covers
- Homes heated by oil, LPG or gas
- Air-to-air heat pumps
- Hot water cylinders
- Air-to-water heat pumps
- Underfloor heating
- Radiator systems
The process
Each visit runs to the same pattern: check the plan with you, protect the area, carry out the job, check the system and explain it all to you. On site, the work takes from a couple of days to around a week, depending on the system and how much of the heating changes. Work in Crow is booked in advance at a time that suits you.
- It begins with your house and the heating it relies on now.
- A heat loss survey is carried out, room by room.
- The design covers the heat pump, emitters, hot water and outdoor unit.
- Cost, grant and VAT appear on one fixed-price quote.
- We install, commission and register the system under MCS.
Before we arrive
- Clear a path to the units and the space around them
- Let us know if the building has a permit or sign-in process
- Make sure we can reach the consumer unit or fuse board
Getting a price
Published ranges are a starting point; the quote is built on your property, because every property is different. After a look at the job, by pictures or a survey, the price is fixed. To get going, ring 07833 053749 or fill in the contact form.
Related advice
From one of our customers
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead