Oxfordshire · Heat pump installation
Pyrton air source heat pumps
For heat pump installation in Pyrton, one call is all it takes: diagnosis, fixed price, work and sign-off. An F-Gas certified company, NICEIC approved, on Checkatrade.
- Replacing a combi boiler with a heat pump
- Ageing boilers that will need replacing
- Radiators that may be too small for a heat pump
How it works
Anything involving refrigerant is handled by F-Gas qualified engineers, as the law requires, while the electrical side is covered by our NICEIC approval. So on the day, you do not need a separate electrician for the electrical side. On site, it takes a few days for most air-to-water installations, with air-to-air systems often quicker. For a village like Pyrton, tell us about narrow lanes, gates and parking when you book.
- First we find out about the property, the heating you have now and what you are hoping for.
- A heat loss survey works out how much heat each room needs, and we look at the radiators, the cylinder space and where the outdoor unit could go.
- A fixed-price quote follows, setting out the system, any grant that applies and the VAT.
- We fit the outdoor unit and connect it to the heating, hot water and controls.
- Once it’s running correctly, the MCS certificate is issued and we show you the settings.
Preparing for the visit
- Plan for pets to be kept clear during the visit
- Let us know where we can park and unload
- Make sure we can reach the consumer unit or fuse board
How to get a quote
Need a price for air source heat pumps? Please ring us on 07833 053749 or write to us at info@aircondoctor.co.uk with a few details about the property. We’ll talk you through the options and give you a fixed-price quote before anything is booked.
Related advice
How we handle air source heat pumps in Pyrton
Until 31 March 2027, a heat pump installed in residential accommodation carries 0% VAT, with 5% from 1 April 2027. That follows HMRC Notice 708/6, and it does not apply to businesses. For air-to-air systems, we confirm the VAT on your quote. This is general information, not tax advice. We’re often asked to deal with finding a place for the outdoor unit and replacing a combi boiler with a heat pump, on radiator systems, underfloor heating and air-to-water heat pumps.
Older and listed homes in villages like Pyrton need extra care, because permitted development does not apply within the grounds of a listed building, so consent comes first.
Any work on the refrigerant circuit is recorded: the work carried out, the refrigerant involved and the quantities. Keep the records with the manual and the warranty documents, as a manufacturer or a future engineer may ask to see them.
- Where
- Pyrton (OX49)
- Wider area
- Oxfordshire
- Replies
- On the working day you ask
- Pricing
- A fixed price before we start
- Certified
- F-Gas certified company, NICEIC approved, MCS
- Prices
- £8,000–£16,000 before the grant, 0% VAT on homes
- Telephone
- 07833 053749
- Updated
- 30 October 2026
FAQs for Pyrton
Does the Boiler Upgrade Scheme cover homes in Pyrton?
Yes, if the home and the heat pump meet the scheme’s rules: Pyrton is in England, where it applies. It gives £7,500 towards an air-to-water or ground source heat pump, or £2,500 towards an air-to-air heat pump that replaces the fossil-fuel heating and meets the whole home’s heating need. As an MCS certified installer, we apply for it on your behalf.
Is a heat pump in Pyrton permitted development?
That depends on the building and where the outdoor unit goes. The Pyrton Conservation Area takes in the middle of Pyrton. On a house, an air source heat pump can often go ahead under permitted development, with an outdoor unit of no more than 1.5 cubic metres and an installation that meets MCS 020(a), which includes a noise check. Those rights don’t reach the grounds of a listed building, and conservation areas rule out walls or roofs facing a road. If that might affect you, we ask the planning department at South Oxfordshire council, typically the authority for Pyrton.
Will I get records for the system?
Yes, always. A new system comes with commissioning details, F-Gas records and the manufacturer’s warranty information, while repairs and services get a written note of what was found and done.
Do you look at the job first?
Yes, every time. We diagnose before we treat: the survey shows what’s needed, where things go and what access we need, and the quote is based on that.
Do you work in Pyrton?
Yes. We work across Greater London, Surrey, Kent, East and West Sussex, Hampshire, the Isle of Wight, Berkshire, Buckinghamshire, Oxfordshire, Hertfordshire and Essex, Pyrton included.
Are my radiators big enough for a heat pump?
The heat loss survey answers that, room by room. Rooms where the radiator is big enough stay as they are, and any that need upsizing are set out in the quote.
What does F-Gas certified mean?
F-Gas certification shows a company is approved to work on equipment containing fluorinated gases, such as the refrigerant in air conditioning and heat pumps. In Great Britain, that certification is a legal requirement, not an optional extra, and we hold it.
Also in Pyrton
Heat pumps in Pyrton: local notes
VOA council tax data put about 36% of homes across Pyrton and its surrounding area before 1919, and about 78% of households live in detached or semi-detached houses, according to Census 2021 figures. In older homes, the heat loss calculation is especially important, as solid walls and draughts change the size of heat pump needed. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.
Period properties close to St Mary's Church can suit a heat pump, though insulation and any heritage protection are checked first. If your home is listed, like Adwell House about 2.5 miles north, listed building consent comes before any heat pump work.
Pyrton is about 6 miles south of Thame, in Oxfordshire. For air source heat pumps in and around Pyrton, please call 07833 053749 or drop us a line for a fixed-price quote. Our area covers London and the South East, Pyrton included. Pyrton is one of 443 towns, villages and districts in Oxfordshire where we work for homes and businesses. The nearest of our city pages is Guildford, around 34 miles from Pyrton.
Postcode districts we cover here: OX49. Close to Pyrton, our area also takes in Watlington (1 mile south), Britwell Salome (2 miles south-west), Brightwell Baldwin (2 miles west), Chalgrove (3 miles west) and Ewelme (4 miles south-west). Larger places within reach include Oxford (12 miles north-west), Didcot (11 miles west), Abingdon-on-Thames (12 miles west) and Thame (6 miles north).
Local landmarks in Pyrton
Around Pyrton, our work takes us to homes and businesses near All Saints Church, Icknield Community College and The Chequers pub and the streets around them. The countryside around Pyrton includes Aston Rowant NNR and Bald Hill.
What air conditioning won’t do
An honest diagnosis matters more to us than a booking, so here’s what this work cannot put right:
- Gas boiler work, such as disconnecting the old boiler, which needs a Gas Safe registered engineer
- Improving the building’s insulation
- Grants for hybrid systems or replacements of low-carbon systems
If in doubt, phone us on 07833 053749 or write to us at info@aircondoctor.co.uk and we will say what we think.
What the work covers
- Homes heated by oil, LPG or gas
- Underfloor heating
- Hot water cylinders
- Air-to-water heat pumps
- Radiator systems
- Air-to-air heat pumps
Let and managed properties
Managing agents often deal with us directly. Send the address, what’s needed and how access works and we will come back with a fixed-price quote.
Bigger systems bring extra duties: a TM44 inspection by an accredited energy assessor is required at least every 5 years for systems over 12 kW. We can arrange it, prepare the system for it and fix what it finds.
What the work involves, system by system
Air-to-water heat pumps
An air-to-water heat pump costs £8,000–£16,000 (0% VAT on homes), before the grant. A £7,500 grant may be available through the Boiler Upgrade Scheme for eligible homes, and we apply for it as the installer.
Hot water cylinders
The cylinder size depends on how much hot water the household uses.
What a customer said
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager