Kent · Heat pump installation

Heat pump installation in Park Wood, Kent

F-Gas certified and NICEIC approved, we cover Park Wood for MCS certified installation of air source heat pumps for heating and hot water, with the Boiler Upgrade Scheme grant applied for. Fixed-price quotes and a 24/7 emergency line.

  • Checking whether planning permission is needed
  • No space for a hot water cylinder
  • Choosing between air-to-water and air-to-air

Air source heat pumps near Park Wood

What we do, step by step

On the day, we arrive at the time agreed with you and check the plan with you first. Floors and furniture near the work are covered with dust sheets, and anything electrical is made safe before work starts. The work itself takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. In a place like Park Wood, parking is rarely an issue, but tell us about gates and access to the back of the property.

  1. We find out about your home and the heating you have now.
  2. We measure heat loss for every room.
  3. The design covers the heat pump, emitters, hot water and outdoor unit.
  4. Cost, grant and VAT appear on one fixed-price quote.
  5. Then it’s fitted, commissioned and registered with MCS.

Getting ready for the visit

  • Arrange for someone to be there to let us in
  • Tell us about access, such as roof hatches, high walls or locked plant areas
  • Let us know if the building has a permit or sign-in process

Ask for a quote

The quickest way to a quote is to send photos: the inside and outside of the property where the work is, plus the rating plate of any unit already there. Add the address and what you’d like done, and many jobs can be priced from that.

Get a price

Related advice

Air source heat pumps in Park Wood, done properly

We install air source heat pumps in Park Wood and across Kent, and we’re MCS certified. Air-to-water systems feed your radiators or underfloor heating and hot water cylinder, while air-to-air systems heat rooms directly through indoor units and can cool them too. We will explain which type fits your home and why. The work covers underfloor heating, hot water cylinders and air-to-air heat pumps, and people most often call us about questions about listed buildings or conservation areas and working out whether radiators need upsizing.

Cottages and older homes near Park Wood can lose heat faster, which a heat loss calculation will show. Sometimes insulation first is the better investment.

Nothing is signed off by word of mouth: commissioning details for an installation, a fault and repair note for a repair, or a record of the service. Keep it with the system’s paperwork so it’s to hand next time.

Location
Park Wood (ME15, ME17, ME14)
Region
Kent
Credentials
F-Gas certified, NICEIC approved, MCS
Costs
£8,000–£16,000 before the grant, 0% VAT on homes
Enquiries
Same working day
Pricing
Fixed after a survey or photos
Phone
07833 053749
Page updated
30 October 2026

Common questions in Park Wood

Do you cover Park Wood for air source heat pumps?

Yes. We work across London and the South East from our base in East Grinstead, and Park Wood is part of that. To start, call 07833 053749 or use the quote form with a few photos.

Will you come out to Park Wood?

Yes, and the size of the place makes no difference to how we work. A few pictures and the postcode are enough to get things started.

Do you protect the property while you work?

We put dust sheets over floors and furniture near the work first, and we tidy up as we go. At the end, we clear up and show you what we’ve done.

Am I eligible for a heat pump grant?

Not every home qualifies, so we check. Only one grant is available per property, it cannot replace a low-carbon system, and hybrids don’t qualify and other conditions apply.

How soon will you get back to me?

On the same working day you contact us. After that, we agree a survey, diagnosis or installation date that suits you, and you get a fixed price before any work goes ahead.

Do you work on systems someone else installed?

Yes. We start with a proper look and tell you honestly what we find, including anything about the original installation that needs putting right. You get a fixed price before any work goes ahead.

Does servicing affect my warranty?

That depends on the brand. Where servicing is a condition, a missed service could give the manufacturer grounds to refuse a claim and we will tell you what your brand asks for.

Signs you need air source heat pumps in Park Wood

Some homes heated by electric heaters or storage heaters consider a heat pump instead. The survey tells you whether it’s practical and what’s involved along with whether any grant could apply.

If any of these sounds familiar, it’s worth a diagnosis:

  • Ageing boilers that will need replacing
  • No space for a hot water cylinder
  • Checking emitters for a heat pump

Live in one of the older houses around St Martin's Church? Expect the survey to look closely at heat loss and at the building’s planning status.

Comparing quotes

  • If the quote is based on a survey, pictures or a diagnosis
  • Whose warranty applies, and on what terms
  • What’s in the price and what is not

Our hiring checklist

What owners can safely do

There are a few things you can safely do yourself: keep the outdoor unit clear of leaves, plants and clutter, check the settings and the remote, and follow the cleaning the manual describes. Opening up the units, the electrics and the refrigerant circuit are a job for us.

Keep a note of anything odd: an error code, a new noise, a drip, a smell or a change in how well the system heats or cools. It helps us diagnose quickly, and a photo or a short video of the display is even better.

What the work involves, system by system

VAT on heat pumps

HMRC says most air conditioning units are air source heat pumps, but each case depends on the facts and the VAT is confirmed on your quote.

Air-to-air heat pumps

An air-to-air system heats rooms directly and can also provide cooling. They don’t heat hot water, so that has to come from elsewhere.

Air source heat pumps around Park Wood

About 36% of homes in and around Park Wood have been built since 2000, according to Valuation Office Agency council tax records. Better insulated, newer homes are often a good match for a heat pump. There are 2 conservation areas within a mile of the centre of Park Wood. That affects heat pumps: listed buildings need consent, and conservation areas limit where the outdoor unit can go under permitted development. Where needed, we check with Maidstone council, usually the planning authority here.

Stoneacre, roughly 1.3 miles north-east, is a reminder to check your home’s listing status: permitted development doesn’t cover listed buildings.

Park Wood is about 2 miles south-east of Maidstone, in Kent. Park Wood gets the same approach as every job we take on: a look at the job first, a fixed-price quote and written records at the end. Our list for Kent has 922 entries and Park Wood is among them. For properties nearby, see our Bromley page (26 miles or so).

Park Wood sits on or near the A274, so getting to you is simple. Our working area takes in ME15, ME17 and ME14, every street of it. Other places close to Park Wood include Otham (1 mile north-east), Willington (1 mile north), Boughton Monchelsea (1 mile south-west), Shepway (1 mile north) and Boughton Green (1 mile south-west). Larger places within reach include Ashford (15 miles south-east), Sittingbourne (11 miles north-east), Royal Tunbridge Wells (14 miles south-west) and Gravesend (15 miles north-west).

Around Park Wood

Locally, jobs take us to houses, flats and workplaces close to Mote Park, New Line Learning Academy and The White Horse pub and the streets around them. The closest station to Park Wood is Maidstone West station, roughly 2.6 miles north-west of the centre. Well-known places in the area include Sutton Valence Castle (2.7 miles south-east) and The Mall Maidstone (2.5 miles north-west). For a walk, there’s Detling Hill.

Map of Park Wood © OpenStreetMap contributors

What a customer said

“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”

Sarah M., East Grinstead

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead