Kent · Heat pump installation

Sittingbourne air source heat pumps

F-Gas certified and NICEIC approved, we cover Sittingbourne for heat pump installation. A fixed price before we start, and a 24/7 emergency line.

  • Radiators that may be too small for a heat pump
  • Planning and permitted development questions
  • Questions about where the outdoor unit can go

Air source heat pumps in Sittingbourne

About our air source heat pumps in Sittingbourne

We begin with a room-by-room heat loss survey. That tells us how much heat the home needs, room by room, so the heat pump and the radiators or indoor units can be sized properly. Guesswork leads to systems that are too big or too small. The work covers hot water cylinders, air-to-water heat pumps and homes heated by oil, LPG or gas, and common reasons people get in touch are questions about where the outdoor unit can go and checking eligibility for a heat pump grant.

Older homes in a town like Sittingbourne can still suit a heat pump, sometimes with larger radiators or more insulation. We work that out from a heat loss calculation.

Some warranty terms depend on the system being serviced regularly by a qualified engineer. Where yours does, a regular service with us keeps that side in order and each visit is recorded.

Place
Sittingbourne (ME10, ME9)
Region
Kent
Price
A fixed price before work begins
Certified
F-Gas certified company, NICEIC approved, MCS
Prices
Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
Call
07833 053749
Page updated
30 October 2026

What affects the quote in Sittingbourne

The quote reflects the job in front of us. We take into account:

  • The type of system, from a single split to a larger system
  • How far the pipework has to run, and where
  • Access, including height, roofs and ladders

Every job is different, so each one gets its own fixed-price quote. The system, the access, the pipe routes and the parts involved all make a difference.

What to send for a quote

There’s no need for technical detail. Just send:

  • A short video of any fault, such as a noise or a flashing light
  • A photo of the consumer unit with the cover closed
  • Where the outdoor unit is, or where you’d like it

Quoting starts with a diagnosis, from a site survey or, where the job is straightforward, from pictures and measurements. Then you get a fixed price so you know the cost before we begin.

Homes in Sittingbourne and heat pumps

Sittingbourne lies within about 2 miles of the sea. Salt air is hard on outdoor units, so a heat pump near the sea needs a sensible position and regular checks, and some models offer corrosion protection for coastal sites.

Homeowners near Sittingbourne station often ask whether a heat pump can take over from the boiler, and the heat loss survey answers that. Period properties close to Church of the Holy Trinity can suit a heat pump, though insulation and any heritage protection are checked first.

Sittingbourne is about 37 miles east of London, in Kent. Whether you’re in the middle of Sittingbourne or further out, we cover air source heat pumps, from a single room to a whole building. Our area takes in 922 places across Kent, from busy centres to quieter spots. Bromley, roughly 31 miles off, has its own page on this site.

Being one of Kent’s larger places, Sittingbourne has a wide mix of homes and commercial buildings, and we cover all of them. The A2 and A249 pass through or close to Sittingbourne, which keeps journeys to surveys and visits simple. Close by, we work in Murston (1 mile east), Milton Regis (1 mile north-east), Kemsley (1 mile north), Howt Green (1 mile north-west) and Heart's Delight (1 mile south-west). We also work in nearby towns such as Maidstone (10 miles south-west), Ashford (15 miles south), Whitstable (13 miles east) and Faversham (7 miles east).

Around Sittingbourne

In Sittingbourne, that means homes and buildings near Milton Court Primary Academy, The Golden Hope pub and Milton Creek Country Park, among other places. There’s a railway station in Sittingbourne itself: Sittingbourne station. Other landmarks nearby include Bayford Court (under half a mile east) and Court Hall Museum (under half a mile north).

Map of Sittingbourne © OpenStreetMap contributors

Questions from Sittingbourne

Does being near the sea make a difference to air source heat pumps in Sittingbourne?

It can, as Sittingbourne is within about 2 miles of the sea, where salt in the air is hard on coils and fixings. The outdoor unit position, its fixings and regular servicing all help near the sea.

Will a heat pump in Sittingbourne need planning permission?

It comes down to the building and the spot chosen for the outdoor unit. The High Street, Sittingbourne Conservation Area is close to the centre of Sittingbourne. Heat pumps on houses are often permitted development, but listed buildings need consent and conservation areas restrict outdoor units facing a road. Where it’s needed, we check with the local planning authority (for Sittingbourne, typically Swale council).

What accreditations do you have?

We are an F-Gas certified company, NICEIC approved for electrical work and MCS certified for heat pumps. We are members of Checkatrade too.

What does an air-to-water heat pump cost?

For air-to-water, it’s £8,000–£16,000 (0% VAT on homes) before any Boiler Upgrade Scheme grant. Air-to-air prices are set after a survey, and we confirm the VAT on the quote.

Will skipping a service affect the warranty?

Check the manufacturer’s terms. Some warranty terms require the system to be serviced regularly by a qualified engineer, so it’s worth checking. Either way, keep a record of every service.

Do you work on systems someone else installed?

Yes. We start with a proper look and tell you honestly what we find, including anything about the original installation that needs putting right. Any work is priced before it goes ahead.

Why does F-Gas certification matter?

F-Gas certification shows a company is approved to work on equipment containing fluorinated gases, such as the refrigerant in air conditioning and heat pumps. That isn’t optional: it’s required by law, and AirCon Doctor is certified.

The process

Protection comes first: dust sheets over floors and furniture near the work and nothing is moved without asking you. Then the electrics are made safe and the work begins. It takes from a couple of days to around a week, depending on the system and how much of the heating changes, and we tidy up before we leave. For a visit in Sittingbourne, tell us how to reach the outside wall or the outdoor unit.

  1. Step one is understanding the house, how it’s heated today and what you’d like to change.
  2. A heat loss survey works out how much heat each room needs, and we look at the radiators, the cylinder space and where the outdoor unit could go.
  3. A fixed-price quote follows, setting out the system, any grant that applies and the VAT.
  4. We fit the outdoor unit and connect it to the heating, hot water and controls.
  5. Commissioning, MCS certification and a handover of the controls finish the job.

Getting ready for the visit

  • Name a contact who can meet us at the agreed time
  • Mention any parking restrictions near the property
  • Find the manual or the paperwork for the system, if you have it

Ask for a quote

For a fixed-price quote, ring 07833 053749 or use the quote form and tell us about the property and what you need. Photos help a lot. You’ll hear back from us the same working day.

Get a quick quote

Related advice

Let and managed properties

From a single flat to a whole estate, you get the same standard: diagnosis, a fixed price, access agreed with the people on site and paperwork at the end.

We also work for facilities teams in offices, schools and public buildings across Kent. Larger buildings can be done in stages to keep disruption down.

Different systems, different jobs

Hot water cylinders

The cylinder size depends on how much hot water the household uses.

Air-to-air heat pumps

The £2,500 grant for air-to-air applies only when the system replaces the fossil-fuel heating and covers the whole home’s demand. It also has to be fitted by an MCS certified installer, in a home.

From one of our customers

“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”

Sarah M., East Grinstead

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead