Oxfordshire · Heat pump installation
Air Source Heat Pumps in Kingston Stert
Looking for air source heat pumps in Kingston Stert? We diagnose first, fix the price and book the work around you, then sign it off with written records.
- Wanting to stop using oil, LPG or gas for heating
- Deciding which kind of heat pump suits the home
- Questions about the Boiler Upgrade Scheme
Air source heat pumps in Kingston Stert, done properly
Air-to-air heat pumps can qualify for a £2,500 Boiler Upgrade Scheme grant, but only in some cases. It has to replace the fossil-fuel heating, cover the whole heating demand, be fitted by an MCS certified installer and be in a home; adding it alongside a boiler doesn’t qualify. The work covers underfloor heating, radiator systems and air-to-water heat pumps, and the jobs we see most are questions about the Boiler Upgrade Scheme and working out whether radiators need upsizing.
Older and listed homes in villages like Kingston Stert need extra care, because permitted development does not apply within the grounds of a listed building, so consent comes first.
Each manufacturer sets its own warranty period. Daikin, for example, gives a standard 2 years on split air conditioning, with longer extensions only on its air-to-water heat pumps. Whatever the brand, the manufacturer’s terms are explained on your quote.
- Location
- Kingston Stert (OX39)
- Wider area
- Oxfordshire
- Prices
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Approvals
- NICEIC and F-Gas, MCS
- Price
- A fixed-price quote up front
- Telephone
- 07833 053749
- Last updated
- 30 October 2026
Owner checks or an engineer?
Owner care supports servicing; it does not replace it. Clean filters and a clear outdoor unit help the system run as it should, but the refrigerant circuit, the electrics and the parts you can’t see still need an engineer at the interval the manufacturer recommends.
On air conditioning, the filters in the indoor unit are normally the one part owners can clean where the manufacturer’s manual explains how. They come out, get a gentle clean and go back only when they’re dry. For a heat pump, the main owner jobs are a clear outdoor unit and sensible control settings.
What we do, step by step
Everything the job needs comes with us, from tools and test equipment to ladders and dust sheets. You only need to give us clear access to the units, or their planned positions, and to the fuse board. On site, the work takes a few days on site, depending on the cylinder, the radiators and the pipework involved. Somewhere like Kingston Stert, it helps to know about lanes, gates and where to park.
- We start with your plans and the property.
- A survey covers heat loss, radiators, hot water and where the outdoor unit could sit.
- You get our view on the right type for the house, and on whether the Boiler Upgrade Scheme applies.
- We install the heat pump and connect it up.
- The job ends with commissioning, the MCS certificate and a walk through the controls.
Preparing for the visit
- Keep pets out of the rooms we’re working in
- Mention any parking restrictions near the property
- Have the make and model of any existing unit to hand
How to get a quote
Some jobs can be priced from pictures, while others need a survey. Bigger systems, commercial sites and awkward pipe routes are normally surveyed on site. Either way, you get a fixed price before any work is booked.
Read more
Looking after your system
Every system needs looking after, and most of it is easy. A few tips:
- Diary the next service
- Keep the MCS certificate with the manufacturer’s paperwork
- Don’t block radiators or indoor units with furniture
The warranty on the heat pump is the manufacturer’s, on its own terms. We explain the terms for your brand, including any servicing conditions.
Heat pumps prefer steady, low-temperature running as explained at handover.
Honest limits
An honest diagnosis matters more to us than a booking, so here’s what air source heat pumps won’t do:
- Insulation work, such as loft or cavity wall insulation
- Gas boiler work, such as disconnecting the old boiler, which needs a Gas Safe registered engineer
- Formal advice on VAT for your situation
Not sure which it is? You can phone 07833 053749 or use the quote form and we will tell you honestly before booking.
What we work on in Kingston Stert
- Hot water cylinders
- Underfloor heating
- Air-to-water heat pumps
- Homes heated by oil, LPG or gas
- Air-to-air heat pumps
- Radiator systems
What a heat pump looks like in Kingston Stert
About 75% of households live in detached or semi-detached houses, according to the last census (2021). Detached and semi-detached houses typically have room for the outdoor unit and a cylinder.
Older homes near Church of St Mary may need extra checks for planning and heat loss before a heat pump is designed. Adwell House lies about 2.1 miles south-west. Owners of listed homes need consent before a heat pump is fitted, so it’s one of our first questions.
Kingston Stert is about 3 miles south of Thame, in Oxfordshire. Across the OX39 area, we cover air source heat pumps. Across Oxfordshire, we cover 443 places, and Kingston Stert is one of them. Guildford, roughly 35 miles off, has its own page on this site.
Every address in OX39 is covered, from the main roads to the quietest streets. Other places close to Kingston Stert include Sydenham (1 mile north-east), Emmington (1 mile north-east), Chinnor (2 miles east), Towersey (3 miles north) and Thame (3 miles north). We also work in nearby towns such as Oxford (13 miles west), Didcot (14 miles south-west), Abingdon-on-Thames (14 miles west) and Henley-on-Thames (12 miles south).
Local landmarks in Kingston Stert
We fit and service air conditioning in homes and premises around The Crown Inn. The nearest railway station is Princes Risborough station, roughly 4.6 miles east. Well-known places in the area include Thame Museum (3.5 miles north-west) and Thame Community Hospital (3 miles north). Not far away are Bald Hill and Oakley Hill nature reserve.
What else we do in Kingston Stert
Kingston Stert questions
Is a heat pump in Kingston Stert permitted development?
It comes down to the building and the spot chosen for the outdoor unit. The Sydenham Conservation Area is close to the centre of Kingston Stert. On a house, an air source heat pump can often go ahead under permitted development, with an outdoor unit of no more than 1.5 cubic metres and an installation that meets MCS 020(a), which includes a noise check. Those rights don’t reach the grounds of a listed building, and conservation areas rule out walls or roofs facing a road. If that might affect you, we ask South Oxfordshire council, which is usually the planning authority for Kingston Stert.
Can I get the Boiler Upgrade Scheme grant in Kingston Stert?
Yes, the scheme covers homes in England, including Kingston Stert, if they qualify. For an air-to-water heat pump the amount is £7,500; an air-to-air system can get £2,500 if it replaces the fossil-fuel heating outright, meets the home’s full heating demand and is not an add-on to a boiler. As an MCS certified installer, we apply for it on your behalf.
How long will it take to install a heat pump?
The work takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. We confirm the timing after the survey, and you can phone 07833 053749, or email if that’s easier to book it.
Will skipping a service affect the warranty?
It can, for some brands. Read the manufacturer’s terms, or send us the make and model and we’ll explain them, and book the service at the interval they recommend.
Who is responsible for leak checks?
The F-gas rules share it between the equipment’s operator and the engineers who work on it. How often depends on the size of the refrigerant charge in tonnes of CO2 equivalent: at least yearly for 5 to under 50 tCO2e, and every 6 months for 50 to under 500 tCO2e.
Should I choose air-to-water or air-to-air?
Air-to-water heats radiators or underfloor heating and hot water; air-to-air heats rooms through indoor units and can cool them. With air-to-air, hot water needs another source and the survey helps decide.
Will my radiators work with a heat pump?
The heat loss survey answers that, room by room. Rooms where the radiator is big enough stay as they are and any changes are in the quote.
A customer’s words
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath