Oxfordshire · Heat pump installation
Heat pump installation in Filchampstead, Oxfordshire
Expert air source heat pumps for Filchampstead: diagnosis first, then a fixed-price quote, the work and written records. Call for a fixed-price quote.
- Checking eligibility for a heat pump grant
- Planning and permitted development questions
- Radiators that may be too small for a heat pump
What happens if it’s left?
Planning rules have specific conditions. We look at the planning position early, so there are no surprises covering listed buildings, conservation areas and any Article 4 direction. For a village like Filchampstead, booking ahead lets us plan the trip properly.
Our prices page shows typical ranges, but each job is priced on what it involves. Call for a fixed-price quote, and we will explain what it covers.
What you get with us
- Manufacturer’s warranty terms explained on your quote
- We reply to enquiries the same working day
- F-Gas certified company
- Emergency calls taken 24/7
Take a look at how installs are priced or our accreditations and certificates.
Air source heat pumps for homes and businesses in Filchampstead
We begin with a room-by-room heat loss survey. That tells us how much heat the home needs, room by room, so the heat pump and the radiators or indoor units can be sized properly. Sizing by rule of thumb is not good enough. The work covers underfloor heating, radiator systems and hot water cylinders, and common reasons people get in touch are comparing heat pump types and not knowing whether a grant applies.
In a place like Filchampstead, some homes are listed, because permitted development does not apply within the grounds of a listed building, so consent comes first.
Some warranty terms depend on the system being serviced regularly by a qualified engineer. Where yours does, a regular service with us keeps that side in order, and every service is written up.
- Location
- Filchampstead (OX2)
- Region
- Oxfordshire
- Accreditations
- F-Gas certified company, NICEIC approved, MCS
- Guide price
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Price
- Fixed-price quote after a site survey
- Call
- 07833 053749
- Checked
- 30 October 2026
What else we do in Filchampstead
Before you call an engineer
For air conditioning, cleaning the indoor unit’s filters is the main job owners can do where the manufacturer’s manual explains how. They come out, get a gentle clean and go back only when they’re dry. On a heat pump, the equivalent is keeping the outdoor unit clear and checking the controls.
Owner care supports servicing; it does not replace it. Simple care keeps the air moving through the system, but the refrigerant circuit, the electrics and the parts you cannot see still need an engineer at the interval the manufacturer recommends.
Your questions about air source heat pumps in Filchampstead
Can I get the Boiler Upgrade Scheme grant in Filchampstead?
Filchampstead is in England, where the Boiler Upgrade Scheme runs. It gives £7,500 towards an air-to-water or ground source heat pump, or £2,500 towards an air-to-air heat pump that replaces the fossil-fuel heating and meets the whole home’s heating need. We hold MCS certification, so the application is ours to make for you.
Will you come out to Filchampstead?
Yes, smaller places are covered as well as towns. We’re based in East Grinstead and plan each visit so the job can be finished in one trip where possible.
Do I need planning permission for a heat pump?
Under the Planning Portal rules, a heat pump on a house can often be permitted development. Listed buildings and their curtilages are excluded, and listed building consent is a separate matter, so we check for your property.
Which manufacturers do you install and repair?
The main ones, including Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. For a new system, we suggest the make and model that suit the property and explain why.
Who has to arrange F-Gas leak checks?
The F-gas rules share it between the equipment’s operator and the engineers who work on it. The interval depends on the refrigerant charge, measured in tonnes of CO2 equivalent: at least every 12 months from 5 tCO2e, and every 6 months from 50 tCO2e.
Will skipping a service affect the warranty?
For some brands, yes. Send us the make and model and we will tell you what the manufacturer expects and stick to the interval they set.
How much time does a heat pump install need?
A typical installation takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. The programme is planned to keep time without heating short, and we explain it in advance.
Different systems, different jobs
Air-to-air heat pumps
Air-to-air heat pumps warm rooms through indoor units and can cool them in summer. Hot water needs a separate source, so that has to come from elsewhere.
Air-to-water heat pumps
An air-to-water heat pump heats water for your radiators or underfloor heating and your hot water cylinder. It replaces the boiler as the main heat source and we install it to MCS standards.
How it works
Each visit follows the same order: agree the plan on site, protect the area, do the work, check the system and explain it all to you. On site, the work takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. If a lane or gateway near Filchampstead is tight for a van, let us know and we will plan for it.
- First we find out about the property, the heating you have now and what you are hoping for.
- A heat loss survey works out how much heat each room needs, and we look at the radiators, the cylinder space and where the outdoor unit could go.
- A fixed-price quote follows, setting out the system, any grant that applies and the VAT.
- The outdoor unit, the indoor equipment and the controls are installed and connected.
- We commission the heat pump, complete the MCS paperwork and talk you through the controls.
Before we arrive
- Arrange for someone to be there to let us in
- Clear access to the fuse board
- Make sure we can reach the outdoor unit, or where it will go
Getting a quote
Want a quote for air source heat pumps? Please phone us on 07833 053749 or send an email with a few details about the property. We will explain what we’d recommend and why, then send a fixed-price quote before you commit to anything.
Read more
Heat pumps in Filchampstead: local notes
About 80% of households live in detached or semi-detached houses, according to the 2021 Census. Houses usually have space for an outdoor unit and a hot water cylinder. At about 56 miles from central London, Filchampstead sits inside the area we cover across London and the South East.
If your home is listed, like Appleton Manor about 2.8 miles south, listed building consent comes before any heat pump work. Period properties close to St Mary's Church can suit a heat pump, though insulation and any heritage protection are checked first.
Filchampstead is about 5 miles west of Oxford, in Oxfordshire. From the centre of Filchampstead to the outskirts, our engineers cover air source heat pumps, from small jobs to large ones. Across Oxfordshire, we cover 443 places, Filchampstead among them. You can also see our page for Guildford, about 48 miles away.
We work across the OX2 postcode area. Local streets include Cumnor Road and Lower Whitley Road, and we cover them all. Close to Filchampstead, our area also takes in Farmoor (1 mile north), Cumnor (1 mile south-east), Chawley (1 mile south-east), Dean Court (1 mile east) and Swinford (2 miles north). Larger places within reach include Oxford (5 miles east), Didcot (11 miles south-east), Bicester (13 miles north-east) and Abingdon-on-Thames (6 miles south-east).
Landmarks near Filchampstead
In Filchampstead, that means homes and buildings near Matthew Arnold School. For rail, the closest station is Oxford station, about 3.2 miles east. A little further out are Oxford University Press Museum (3.4 miles east) and Radcliffe Infirmary (3.6 miles east). The countryside around Filchampstead includes Lashford Lane Fen and Cumnor Hill.
A customer’s words
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath