Hampshire · Heat pump installation
Heat pump installation in Burley Street, Hampshire
For air source heat pumps in Burley Street, choose an F-Gas certified, NICEIC approved company. A fixed price before work begins, and a 24/7 emergency line.
- Ageing boilers that will need replacing
- Planning and permitted development questions
- Moving away from fossil-fuel heating
What we do, step by step
The work area is kept tidy throughout, with dust sheets down and offcuts and packaging cleared up. If we need to drill through a wall, we agree the spot with you first. On site, it takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. Somewhere like Burley Street, it helps to know about lanes, gates and where to park.
- You tell us about the home and what you want from a heat pump.
- We survey for heat loss and look at radiators, cylinder space and outdoor unit options.
- We explain which type of heat pump suits the home and whether a grant could apply.
- The system is installed and connected to the controls.
- The job ends with commissioning, the MCS certificate and a walk through the controls.
Before we arrive
- Mention any managing agent or landlord rules we need to follow
- Keep pets and children away from the work area
- Clear a path to the units and the space around them
How to get a quote
Here’s what helps us quote: where the property is and what kind of building it is, a few photos, the brand and model of anything already fitted and any symptoms, from error codes to drips. Then give us a ring on 07833 053749.
Advice
Air source heat pumps in Burley Street
Many air source heat pumps can be installed as permitted development in England, without a planning application. Conditions include a maximum outdoor unit size of 1.5 m³, compliance with MCS 020(a), use for more than cooling alone and a site outside the curtilage of a listed building. We look at the planning position for your home during the survey. The work covers homes heated by oil, LPG or gas, hot water cylinders and radiator systems, and common reasons people get in touch are an oil, LPG or gas boiler near the end of its life and radiators that may be too small for a heat pump.
In a place like Burley Street, some homes are listed, and permitted development does not cover listed buildings, so we check consent first.
Whatever the visit, you get a written record: commissioning details for an installation, a fault and repair note for a repair, or a record of the service. File it with the manual, because it helps with any later warranty question.
- Place
- Burley Street (BH24)
- Wider area
- Hampshire
- Approvals
- NICEIC approved, F-Gas certified, MCS
- Price
- Fixed, in writing
- Guide price
- £8,000–£16,000 before the grant, 0% VAT on homes
- Replies
- Same working day
- Call
- 07833 053749
- Updated
- 30 October 2026
Heat pumps in Burley Street: local notes
The 2021 Census found about 84% of households in detached or semi-detached houses. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.
Avon Tyrrell House, roughly 2.7 miles south-west, is a reminder to check your home’s listing status: permitted development does not cover listed buildings.
Burley Street is in Hampshire. Homes and businesses alike in Burley Street, our engineers can help with air source heat pumps. We reply to enquiries the same working day, and there’s a 24/7 emergency line. In Hampshire alone we list 683 places, and Burley Street is one. The nearest of our city pages is Worthing, around 57 miles from Burley Street.
We cover every part of the BH24 postcode area for air source heat pumps and the roads nearby. From Tyrells Lane, Ringwood Road and Forest Road to the smaller roads in between, nowhere is left out. Other places close to Burley Street include Burley (1 mile south-east), Foulford (2 miles north-west), Forest Corner (2 miles north-west), Shobley (2 miles north-west) and Bagnum (2 miles south-west). Further out, we also cover Totton (11 miles north-east), Lymington (9 miles south-east), Romsey (15 miles north-east) and Hythe (14 miles east).
Landmarks near Burley Street
Locally, jobs take us to houses, flats and workplaces close to The Queen's Head pub. The countryside around Burley Street includes Linbrook Lake and Blashford Lakes.
FAQs for Burley Street
Is planning permission needed for a heat pump in Burley Street?
It comes down to the building and the spot chosen for the outdoor unit. The centre of Burley Street is in the Burley Conservation Area. Heat pumps on houses are often permitted development, but listed buildings need consent and conservation areas restrict outdoor units facing a road. Where it’s needed, we check with the planning department at New Forest council, usually the authority for Burley Street.
Does the Boiler Upgrade Scheme cover homes in Burley Street?
Burley Street is in England, where the Boiler Upgrade Scheme runs. Air-to-water and ground source systems attract £7,500. Air-to-air gets £2,500, but only where it takes over from fossil-fuel heating and covers the whole home’s heating demand. As an MCS certified installer, we apply for it on your behalf.
Whose job is it to check the system for leaks?
The operator of the equipment, working with qualified engineers. Systems below 5 tCO2e fall outside the set leak check intervals, while larger ones need checks at least every 12 months, or every 6 months from 50 tCO2e. We can tell you which band your system falls into.
What does an air-to-water heat pump cost?
An air-to-water heat pump costs £8,000–£16,000 (0% VAT on homes) before the grant. The Boiler Upgrade Scheme offers £7,500 to eligible homes in England and Wales, and we confirm eligibility before you commit.
Do you have a 24/7 line?
Yes, 24/7. When you call, tell us the make, what’s happening and any error code, and we’ll talk you through the next steps.
Do you survey before quoting?
Yes. We always look before we price, either on a site survey or from pictures and details for simple jobs. Then you get a fixed-price quote.
Should I choose air-to-water or air-to-air?
Air-to-water replaces the boiler for heating and hot water, while air-to-air heats and cools rooms, and we help you choose. We install both types.
Other services in Burley Street
Common problems we fix in Burley Street
When a home is being extended or renovated, it’s a good moment to look at heat pumps. Pipework, radiators and space for a cylinder are easier to plan while work is going on.
These are the situations we see most often:
- Questions about the Boiler Upgrade Scheme
- Plans to switch to electric heating with a heat pump
- Working out where a cylinder could go
Sizing comes from the heat each room loses on a cold day, not from the size of the old boiler.
What to look for in a quote
- Whose warranty applies, and on what terms
- What paperwork you will receive afterwards
- How extra work would be agreed if they find something unexpected
Managing agents and facilities teams in Burley Street
Running several properties is easier with one contractor. Our area covers Greater London and the South East, so work at different addresses can be planned together and kept to a regular schedule.
We regularly work with managing agents. Send the address, what’s needed and how access works, and we will send a fixed-price quote.
How the job changes from property to property
Air-to-air heat pumps
A £2,500 Boiler Upgrade Scheme grant is available for air-to-air only if it replaces the fossil-fuel heating and meets the full heating demand. It must be installed by an MCS certified installer and be in a home.
VAT on heat pumps
Please treat this as general guidance rather than tax advice.
A customer’s words
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead