Hampshire · Heat pump installation
Air Source Heat Pumps in Burley
MCS certified installation of air source heat pumps for heating and hot water, with the boiler upgrade scheme grant applied for, in Burley and nearby. Ask us for a fixed-price quote; we reply the same working day.
- Deciding which kind of heat pump suits the home
- Plans to switch to electric heating with a heat pump
- Ageing boilers that will need replacing
What air conditioning won’t do
We will not sell you work that doesn’t address the problem, so these are the things it won’t cover:
- Promising eligibility for the Boiler Upgrade Scheme
- Formal advice on VAT for your situation
- Gas boiler work, such as disconnecting the old boiler, which needs a Gas Safe registered engineer
If in doubt, give us a ring on 07833 053749 and we will say what we think before you book.
What we work on in Burley
- Homes heated by oil, LPG or gas
- Air-to-air heat pumps
- Radiator systems
- Air-to-water heat pumps
- Underfloor heating
- Hot water cylinders
Air source heat pumps in Burley
Installing an air source heat pump in a home is zero-rated for VAT until 31 March 2027, then 5%. This is HMRC’s energy-saving materials relief, which applies to homes rather than businesses. For air-to-air systems, we confirm the VAT on your quote. This is general information, not tax advice. If you’re dealing with ageing boilers that will need replacing and questions about where the outdoor unit can go, we can help.
In a place like Burley, some homes are listed, and permitted development does not cover listed buildings, so consent comes first.
Refrigerant work is written up in the F-Gas records: what was done, the refrigerant type and any amount added or recovered. File them with the system’s paperwork, as a manufacturer or a future engineer may ask to see them.
- Where
- Burley (BH24)
- Region
- Hampshire
- Enquiries
- We reply the same working day
- Approvals
- F-Gas certified, NICEIC approved, MCS
- Price
- Fixed, in writing
- Price guide
- £8,000–£16,000 before the grant, 0% VAT on homes
- Phone
- 07833 053749
- Page updated
- 30 October 2026
Questions from Burley
Does the Boiler Upgrade Scheme cover homes in Burley?
Burley is in England, where the Boiler Upgrade Scheme runs. It gives £7,500 towards an air-to-water or ground source heat pump, or £2,500 towards an air-to-air heat pump that replaces the fossil-fuel heating and meets the whole home’s heating need. As an MCS certified installer, we apply for it on your behalf.
Do you cover smaller places like Burley?
Yes, and the size of the place makes no difference to how we work. A few photos and the postcode are enough to get things started.
What does F-Gas certified mean?
Certification shows a business is approved to work on systems that hold F gas refrigerant. In Great Britain, that certification is a legal requirement, not an optional extra, and AirCon Doctor is certified.
Will skipping a service affect the warranty?
That depends on the brand. Where servicing is a condition, a missed service could give the manufacturer grounds to refuse a claim, so we explain the terms on your quote.
Will you work on another installer’s system?
Yes. We work on systems fitted by other installers as well as our own, on all the main brands. Send us the make and model, and any records you have.
Can you set up regular servicing?
Yes. We offer maintenance contracts, set at the interval the system and the manufacturer’s terms need. Each visit is recorded and F-Gas records kept where they apply.
Do you work on all makes?
We work with the leading brands, including Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. Tell us the make and model and we’ll take it from there.
Let and managed properties
Under the GB F-gas rules, responsibility for leak checks is shared between whoever operates the equipment and the engineers who work on it. In a let or managed building, it’s worth agreeing who that operator is and we’re happy to deal with whoever it is.
Keeping records across a portfolio is half the battle. Each visit produces a dated record, with F-Gas records wherever refrigerant work is involved, ready for a tenant, a buyer or an inspection.
Nearby places to Burley
Other services in Burley
Air source heat pumps in Burley: the local picture
The 2021 Census found about 87% of households in detached or semi-detached houses. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these. Central Burley is inside the Burley Conservation Area. Listed buildings are part of the picture here: about 5 within half a mile of the centre, such as Burley Manor Hotel (grade II). So the heat pump survey asks two extra questions here: is the home listed, and is it inside a conservation area?
Live in one of the older houses around Church of St John the Baptist? Expect the survey to look closely at heat loss and at the building’s planning status. Avon Tyrrell House, roughly 2.3 miles south-west, is a reminder to check your home’s listing status: permitted development doesn’t cover listed buildings.
Burley is in Hampshire. Burley gets the same approach as every job we take on: a look at the job first, a fixed-price quote and written records at the end. In Hampshire alone we list 683 places and Burley is among them. Worthing, roughly 57 miles off, has its own page on this site.
Here we cover the BH24 postcode area. From The Mall, The Cross and Doveys Close to the smaller roads in between, nowhere is left out. Places around Burley that are also on our list: Burley Street (1 mile north-west), Bagnum (2 miles west), Foulford (2 miles north-west), Crow (3 miles west) and Forest Corner (3 miles north-west). We also work in nearby towns such as Totton (11 miles north-east), Lymington (8 miles south-east), Romsey (15 miles north-east) and Hythe (13 miles east).
What’s near Burley
Around Burley, our work takes us to homes and businesses near The Burley Inn. Burley’s nearest station is Sway station, roughly 5 miles south-east of the centre. Green spaces nearby include Blashford Lakes and Linbrook Lake.
Aftercare tips
Systems last better with the right care. Here’s what we suggest:
- Keep up with insulation and draught-proofing
- Diary the next service
- Do not block radiators or indoor units with furniture
Handover includes the controls and how to get the best from a heat pump. Heat pumps tend to work best running steadily rather than in short bursts so we set the controls up with you.
Don’t cover radiators with furniture or heavy curtains, as the system relies on them giving out heat.
What happens on the day
Wherever the system can be run before we leave, we run it and check it in operation. Then we explain what was done and answer your questions, and anything that needs a follow-up is pointed out there and then. All told, the work takes a few days on site, depending on the cylinder, the radiators and the pipework involved. For a place like Burley, the timing is set with you and the travel is our side of the planning.
- First we talk through the property and the current system.
- Every room’s heat loss is worked out on site.
- We design the system, check the radiators and cylinder and look at the outdoor unit position.
- Cost, grant and VAT appear on one fixed-price quote.
- We install, commission and register the system under MCS.
Getting ready for the visit
- Tell us about parking and loading
- Keep pets out of the rooms we are working in
- Mention any roof access, ladders or high-level work
Getting a price
Need a price for air source heat pumps? Please call us on 07833 053749 or write to us at info@aircondoctor.co.uk and tell us about the job. We will talk you through the options and give you a fixed-price quote before anything is booked.
Read more
From one of our customers
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath