Isle of Wight · Heat pump installation
Air Source Heat Pumps in Branstone
Air source heat pumps for Branstone, from F-Gas certified engineers, with warranty terms explained brand by brand. Enquiries answered the same working day.
- Ageing boilers that will need replacing
- Plans to switch to electric heating with a heat pump
- Radiators that may be too small for a heat pump
When to call us in Branstone
Air-to-air systems interest people who want cooling in summer as well as heating. They heat rooms through wall, floor or ceiling units, and can cool them when it’s hot. Whether a grant applies depends on the scheme conditions.
Customers typically contact us after spotting one of these:
- An oil, LPG or gas boiler near the end of its life
- Questions about listed buildings or conservation areas
- Plans to switch to electric heating with a heat pump
Haseley Manor lies about 1.2 miles north-west. Owners of listed homes need consent before a heat pump is fitted, so it’s one of our first questions.
Before booking anyone
- Whether you get F-Gas records where refrigerant is involved
- Proof of F-Gas company certification
- Whether the manufacturer’s warranty depends on regular servicing
About our air source heat pumps in Branstone
Until 31 March 2027, a heat pump installed in residential accommodation carries 0% VAT, with 5% from 1 April 2027. That follows HMRC Notice 708/6, and it does not apply to businesses. For air-to-air systems, we confirm the VAT on your quote. This is general information, not tax advice. If the problem is planning and permitted development questions and questions about the Boiler Upgrade Scheme, we can sort it out.
Homes around Branstone normally have room outside for a heat pump, so the design comes down to heat loss, radiators and hot water.
Each manufacturer sets its own warranty period. For example, Daikin’s standard warranty on split air conditioning is 2 years, and its longer extensions apply to its air-to-water units only. Whatever the brand, the manufacturer’s terms are explained on your quote.
- Where
- Branstone (PO36)
- Region
- Isle of Wight
- Quotes
- A fixed-price quote up front
- Replies
- Answered the same working day
- Typical price
- £8,000–£16,000 before the grant, 0% VAT on homes
- Credentials
- NICEIC approved, F-Gas certified, MCS
- Telephone
- 07833 053749
- Checked
- 30 October 2026
Places near Branstone
Other services in Branstone
After we’ve gone
Simple habits make a real difference. Our advice:
- Keep to regular servicing
- Keep the outdoor unit clear all year
- Check what your manufacturer’s warranty asks of you
Once commissioned, we register the installation with MCS and give you the certificate. Keep it with the manufacturer’s paperwork, as you may need it later.
Keep radiators and indoor units unobstructed so the heat can get into the room.
Your questions about air source heat pumps in Branstone
Do I need planning permission for a heat pump in Branstone?
There’s no single answer: the building and the outdoor unit position decide it. The centre of Branstone is in a conservation area. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit cannot face a road. Where needed, we check with the local planning authority (for Branstone, typically Isle of Wight council).
Does sea air affect air conditioning in Branstone?
It can. Branstone is within about 3 miles of the coast, and salt air speeds up corrosion on outdoor units. We site outdoor units out of the worst of the sea wind where possible and can suggest models with corrosion protection where the manufacturer offers it.
What warranty do I get?
The manufacturer’s warranty, on the manufacturer’s terms. Terms differ by brand, and we set them out on your quote.
What does F-Gas certified mean?
F-Gas certification shows a company is approved to work on equipment containing fluorinated gases, such as the refrigerant in air conditioning and heat pumps. In Great Britain, that certification is a legal requirement, not an optional extra, and AirCon Doctor is certified.
How much does an air source heat pump cost?
Air-to-water work is in the £8,000–£16,000 range (0% VAT on homes), with any grant still to come off. The heat pump size, radiator changes and the cylinder decide where in that range you are. Air-to-air is priced after a survey.
Whose job is it to check the system for leaks?
The operator of the equipment, working with qualified engineers. Systems below 5 tCO2e fall outside the set leak check intervals, while larger ones need checks at least every 12 months, or every 6 months from 50 tCO2e. We’ll work out which band applies to yours.
Can I do the refrigerant work myself?
Anything that involves the refrigerant needs an F-Gas qualified engineer from a certified company. That’s the law, not just our preference, and manufacturers expect it for their warranty too. We’re happy to quote for the full job, supply to commissioning.
Owner checks or an engineer?
Some faults have simple causes you can check first: check the mode, the set temperature, the remote’s batteries and the breaker. If the breaker trips a second time, leave it off and ring us on 07833 053749 or write to us at info@aircondoctor.co.uk.
Owner care supports servicing; it does not replace it. Clean filters and a clear outdoor unit help the system run as it should, but the refrigerant circuit, the electrics and the parts you cannot see still need an engineer at the interval the manufacturer recommends.
Homes in Branstone and heat pumps
Branstone is within about 3 miles of the coast. For a heat pump near the sea, ask about any coastal protection option the manufacturer offers. Census 2021 figures found about 83% of households in detached or semi-detached houses. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.
Period properties close to All Saints' Church can suit a heat pump, though insulation and any heritage protection are checked first.
Branstone is about 5 miles south-east of Newport, in the Isle of Wight. Wherever you are in the PO36 postcode area, we can help with air source heat pumps. Our list for the Isle of Wight has 125 entries, and Branstone is one. Worthing, roughly 38 miles off, has its own page on this site.
Branstone Farm Lane and Stockmans Close and the roads off them are all inside our area. Postcode districts we cover here: PO36. We also cover the places around Branstone: Winford (1 mile east), Apse Heath (1 mile south-east), Princelett (1 mile south), Hale Common (1 mile west) and Newchurch (1 mile north). Larger places within reach include Newport (5 miles north-west), Ryde (5 miles north-east), Cowes (8 miles north-west) and Ventnor (4 miles south). Island and remote properties take a little more planning, so tell us where you are when you ask for a quote for air source heat pumps.
Local landmarks in Branstone
Typical jobs here are in properties near Sandown Bay Academy. Branstone’s nearest station is Shanklin station, roughly 1.9 miles south-east of the centre. A little further out are Wight Aviation Museum (1.3 miles east) and Arthur Webster Memorial Hospital for Children (1.8 miles south-east). The countryside around Branstone includes Alverstone Mead and Stenbury Down.
How it works
Every visit follows the same order: agree the plan on site, put the dust sheets down, do the work, check the system and explain it all to you. On site, the work takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. A note on how to find the property and where to park makes a visit to Branstone easier.
- First, a chat about the property and your goals for the heating.
- The survey checks heat loss, emitters, hot water and the outdoor unit position.
- We explain which type of heat pump suits the home and whether a grant could apply.
- Installation follows on the agreed dates.
- After commissioning, you get the MCS certificate and a handover.
Before we arrive
- Have the make and model of any existing unit to hand
- Let us know where we can park and unload
- Let us know where the consumer unit is
Getting a price
If you need air source heat pumps in Branstone, ring 07833 053749 or email us. Let us know the type of property and what you need, plus some photos if they’re to hand. We reply the same working day.
Read more
A customer’s words
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager