Oxfordshire · Heat pump installation
Binsey air source heat pumps
Heat pump installation, for Binsey and the surrounding area. Call for a fixed-price quote, and we’ll reply the same working day.
- Deciding which kind of heat pump suits the home
- Deciding on the outdoor unit position
- Plans to switch to electric heating with a heat pump
Air source heat pumps in Binsey
Air source heat pumps collect heat from outdoor air and bring it inside, using electricity to drive the process. It works on the same principle as air conditioning, run the other way and the Energy Saving Trust notes that air-to-air heat pumps are sometimes referred to as air conditioning. Common call-outs are for deciding which kind of heat pump suits the home and a boiler that’s getting old, across homes heated by oil, LPG or gas, hot water cylinders and air-to-water heat pumps.
Space for an outdoor unit is rarely an issue near Binsey, so the design comes down to heat loss, radiators and hot water.
AirCon Doctor is an F-Gas certified company and NICEIC approved for electrical work, MCS certified for heat pumps and a Checkatrade member. Our engineers hold the F-gas qualifications needed to work on refrigerant.
- Location
- Binsey (OX2)
- Wider area
- Oxfordshire
- Accreditations
- F-Gas certified company, NICEIC approved, MCS
- Costs
- £8,000–£16,000 before the grant, 0% VAT on homes
- Quote
- A fixed-price quote up front
- Phone
- 07833 053749
- Page updated
- 30 October 2026
Fixed-price quotes for air source heat pumps in Binsey
The quote reflects the job in front of us. We consider:
- What state the existing equipment is in
- The electrical supply and whether a new circuit is needed
- Whether it’s a simple split or a larger system
One room or a whole building, the quote is built the same way: the work involved, the access and the equipment. The price is fixed before any work starts, and the quote sets out the VAT.
Helping us quote
A few details help us quote accurately. When you get in touch, it helps to send:
- The outside wall, roof or yard where the outdoor unit sits or would go
- Where the property is and what kind of building it is
- Your consumer unit or fuse board
Every quote shows the VAT clearly, and the rate that applies to your job is stated. VAT can differ between homes and businesses and between kinds of work, so we confirm it in writing rather than guess. To get one, give us a ring on 07833 053749 or write to us at info@aircondoctor.co.uk.
Nearby places to Binsey
More services for Binsey
Heat pumps in Binsey: local notes
Valuation Office Agency council tax records put about 44% of homes in and around Binsey before 1919. In older homes, the heat loss calculation is especially important, as solid walls and draughts change the size of heat pump needed.
Holywell Manor, roughly 2.2 miles south-east, is a reminder to check your home’s listing status: permitted development doesn’t cover listed buildings. Older homes near Church of St Margaret may need extra checks for planning and heat loss before a heat pump is designed.
Binsey is about 3 miles north-west of Oxford, in Oxfordshire. If you need air source heat pumps in Binsey, please phone us on 07833 053749 or email us for a fixed-price quote. We work across London and the South East, Binsey included. Across Oxfordshire, we cover 443 places, and Binsey is one of them. The nearest of our city pages is Guildford, around 48 miles from Binsey.
Here we cover the OX2 postcode area. We also cover the places around Binsey: Godstow (1 mile north), Wolvercote (1 mile north), Walton Manor (1 mile east), North Oxford (1 mile east) and Jericho (1 mile south-east). We also work in nearby towns such as Oxford (3 miles south-east), Didcot (11 miles south), Bicester (11 miles north-east) and Abingdon-on-Thames (6 miles south).
Local landmarks in Binsey
Locally, jobs take us to houses, flats and workplaces close to Oxford Academy, St Edward's School and Oxford University Parks, among other places. You’ll also find The Trout Inn (0.7 miles north) and St Hugh's College Main Building Including Library (1.4 miles east). For rail, the closest station is Oxford station, roughly 1.6 miles south-east of the centre. Well-known places in the area include Oxford University Press Museum (1.5 miles south-east) and Westgate Shopping Centre (2 miles south-east). Green spaces nearby include Harcourt Hill and Hook Meadow and The Trap Grounds.
How it works
Refrigerant work is done by qualified engineers working for an F-Gas certified company, and electrical work is done by us as NICEIC approved contractors. On the day, both are in the same hands. On site, it takes from a couple of days to around a week, depending on the system and how much of the heating changes. If a lane or gateway near Binsey is tight for a van, let us know and we will plan for it.
- We start with your plans and the property.
- The survey checks heat loss, emitters, hot water and the outdoor unit position.
- You get our view on the right type for the house, and on whether the Boiler Upgrade Scheme applies.
- Installation follows on the agreed dates.
- We commission it, complete the MCS certificate and show you how to use it.
How to prepare
- Unlock any gate, garage or side passage we need
- Tell us about parking and loading
- Name a contact who can meet us at the agreed time
Get a fixed-price quote
Published ranges are a starting point; the quote is built on your property, because every property is different. After a look at the job, by photos or a survey, the price is fixed. To get going, phone us on 07833 053749 or fill in the contact form.
Related advice
Binsey: your questions answered
Will you come out to Binsey?
We do. Villages and hamlets get the same service as the bigger towns. A few photos and the postcode are enough to get things started.
Do I need planning permission for a heat pump in Binsey?
It comes down to the building and the spot chosen for the outdoor unit. The half-mile around the middle of Binsey holds about 7 listed buildings and structures. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit cannot face a road. Where necessary, we check with Oxford City council, which is typically the planning authority for Binsey.
Can landlords and managing agents book you?
Yes. From a single let flat to offices, shops and public buildings, the approach is the same: survey or diagnosis, a fixed price and proper paperwork.
How do you keep the place clean during the work?
Protection goes down first: sheets over the floor and nearby furniture. Any drilling is agreed with you first, and we clear up the dust and offcuts when we finish.
Why use an F-Gas certified company?
Companies working on equipment that contains F gas must be certified by an approved body, and each engineer needs the right qualifications too. It means the refrigerant in your system is handled legally.
Does the grant cover air-to-air heat pumps?
There is a £2,500 grant for air-to-air, but only under strict conditions. It has to replace the fossil-fuel heating, meet the full heating demand, be fitted by an MCS certified installer, and be in a home.
Is there a survey before the work?
Yes, always. We diagnose before we treat: the survey shows what’s needed, where things go and what access we need and the fixed price is built on it.
Keeping the system healthy
Here’s the after-treatment advice, short and simple:
- Keep radiators clear
- Use the settings explained at handover
- Keep the MCS certificate with the manufacturer’s paperwork
Once commissioned, we register the installation with MCS and give you the certificate. Keep it with the manufacturer’s paperwork for future reference.
Don’t cover radiators with furniture or heavy curtains, as the system relies on them giving out heat.
Before you call an engineer
There are a few things you can safely do yourself: keeping the outdoor unit clear, checking the mode and set temperature, and the routine cleaning in the manual. Opening up the units, the electrics and the refrigerant circuit are a job for us.
Some faults have simple causes you can check first: is the system in the right mode, is the set temperature sensible, are the remote’s batteries working and has the breaker tripped. If a breaker trips again after you reset it, leave it off and phone 07833 053749 or fill in the contact form.
From one of our customers
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath