Surrey · Heat pump installation
Heat pump installation in Stanwell Moor, Surrey
Our engineers work in Stanwell Moor on air source heat pumps. A look at the job first, a fixed-price quote and written records at the end.
- Questions about the Boiler Upgrade Scheme
- Ageing boilers that will need replacing
- Plans to switch to electric heating with a heat pump
What affects the quote in Stanwell Moor
Typical ranges are on our prices page, but every job is priced on its own. What we look at:
- How many units are involved
- A single visit or a regular plan
- The type of system, from a single split to a larger system
What you pay reflects the actual work. That is why every job is looked at first, and why the quote is fixed before work begins.
Helping us quote
To speed up the quote, send us:
- The remote or wall controller showing any error
- Where the outdoor unit is, or where you’d like it
- The paperwork from the last service, if you have it
Some jobs can be priced from photos, while others need a survey. Multi-room systems, commercial buildings and anything with a long or hidden pipe route are normally surveyed first. Either way, the quote is fixed before anything goes ahead.
How we handle air source heat pumps in Stanwell Moor
Installing an air source heat pump in a home is zero-rated for VAT until 31 March 2027, then 5%. This is HMRC’s energy-saving materials relief, which applies to homes rather than businesses, and for air-to-air systems we confirm the VAT on your quote. Please treat this as general information rather than tax advice. The work covers hot water cylinders, radiator systems and homes heated by oil, LPG or gas, and people most often call us about working out where a cylinder could go and finding a place for the outdoor unit.
Older and listed homes in villages like Stanwell Moor need extra care, and permitted development does not cover listed buildings, so consent comes first.
Refrigerant work is written up in the F-Gas records: the work carried out, the refrigerant involved and the quantities. Keep the records with the manual and the warranty documents, as a manufacturer or a future engineer may ask to see them.
- Where
- Stanwell Moor (TW19)
- Wider area
- Surrey
- Certified
- F-Gas certified company, NICEIC approved, MCS
- Response
- On the working day you ask
- Quotes
- Fixed after a survey or photos
- Prices
- £8,000–£16,000 before the grant, 0% VAT on homes
- Telephone
- 07833 053749
- Page updated
- 30 October 2026
Also near Stanwell Moor
Also in Stanwell Moor
System by system
The Boiler Upgrade Scheme
There’s one grant per property, and you cannot get a grant to replace a low-carbon system, and hybrid systems are not eligible.
Hot water cylinders
An older cylinder may not suit a heat pump and we tell you if it needs replacing.
FAQs for Stanwell Moor
Will a heat pump in Stanwell Moor need planning permission?
It depends on the property. Around 5 listed entries sit within 0.5 miles of central Stanwell Moor. On a house, an air source heat pump can often go ahead under permitted development, with an outdoor unit of no more than 1.5 cubic metres and an installation that meets MCS 020(a), which includes a noise check. Those rights don’t reach the grounds of a listed building, and conservation areas rule out walls or roofs facing a road. If that might affect you, we ask Spelthorne council, which is typically the planning authority for Stanwell Moor.
Does the Boiler Upgrade Scheme cover homes in Stanwell Moor?
Stanwell Moor is covered, as the scheme runs across England and Wales. The amount depends on the type of heat pump, and the survey confirms which applies. The installer applies, and we are MCS certified.
Do you cover Stanwell Moor?
Yes. We work in Stanwell Moor and across Surrey, within the London and South East area we cover. For a fixed-price quote, call 07833 053749 or email us.
Will I get records for the system?
Yes. It’s your proof of what was done: the date, the work, and any refrigerant added or recovered.
Can we book visits on a schedule?
Yes. Tell us what you have and how it’s used and we will propose a schedule and quote for it. Leak checks required by the F-gas rules can be built in for larger systems.
Which accreditations do you hold?
F-Gas certified, NICEIC approved and MCS certified for heat pumps, plus Checkatrade membership. Our engineers also hold the individual F-gas qualifications needed to work on refrigerant.
How do you keep the place clean during the work?
Floors and furniture near the work are covered with dust sheets before we start, and the area is kept tidy throughout. Before we leave, we clear up and run through the work with you.
What happens on the day
We keep the work area tidy as we go, with sheets down and mess cleared as we go. Any holes, fixings or cable routes are agreed with you before we drill. On site, it takes a few days on site, depending on the cylinder, the radiators and the pipework involved. Visits to Stanwell Moor are agreed with you in advance and planned so the job can be finished in one trip where possible.
- We find out about your home and the heating you have now.
- We measure heat loss for every room.
- From those figures we size the heat pump and decide on radiators, cylinder and outdoor position.
- Cost, grant and VAT appear on one fixed-price quote.
- Then it’s fitted, commissioned and registered with MCS.
Before we arrive
- Clear the space around the indoor unit, or where it will go
- Let us know if the units are on a roof, a high wall or in a locked area
- Have the make and model of any existing unit to hand
Get a fixed-price quote
For air source heat pumps in Stanwell Moor, ring us on 07833 053749 or send an email. Let us know the type of property and what you need, plus some pictures if they’re to hand. We reply the same working day.
Related advice
What a heat pump looks like in Stanwell Moor
About 49% of homes in the Stanwell Moor area date from 1945 to 1972, according to VOA council tax data. Homes of that age often have cavity walls that may or may not be insulated, which the survey checks.
If your home is listed, like Frogmore House about 4.1 miles west, listed building consent comes before any heat pump work. If you live near Heathrow Terminal 5 Rail station, the survey compares air-to-water and air-to-air for your home before anything is quoted.
Stanwell Moor is about 2 miles north of Staines-upon-Thames, in Surrey. Homes and businesses alike in Stanwell Moor, we can help with air source heat pumps. We reply to enquiries the same working day and our emergency line runs 24/7. Across Surrey, we cover 395 places, and Stanwell Moor is one of them. We also work in Guildford, about 15 miles from Stanwell Moor.
Our nearest recent job to Stanwell Moor was on Church Street, Staines-upon-Thames (TW18), about 2 miles south: installing two LG wall-mounted units in the main office area and a single unit in the client meeting room.
Our working area takes in TW19, every street of it. If you need air source heat pumps at a property on Horton Road, Shellfield Close and Spout Lane or a nearby road, we can help. Nearby, we also cover air source heat pumps in Poyle (1 mile north-west), Horton (2 miles west), Colnbrook (2 miles north-west), Brands Hill (2 miles north-west) and Hythe End (2 miles south-west). Further out, we also cover Guildford (15 miles south), Woking (11 miles south), Camberley (13 miles south-west) and Epsom (13 miles south-east).
Around Stanwell Moor
Locally, jobs take us to houses, flats and workplaces close to Arthur Jacob Nature Reserve, Wetherspoon Express pub and Thomas Knyvett College, among other places. The closest station to Stanwell Moor is Heathrow Terminal 5 Rail station, roughly 0.8 miles north-east of the centre. Well-known places in the area include Windsor Castle (4.7 miles west) and Spelthorne Museum (2.1 miles south). Open spaces near Stanwell Moor include Staines Reservoirs and St Ann's Hill.
What air source heat pumps cannot fix
Before booking, it helps to know what’s not included:
- Planning approval where permitted development doesn’t apply
- Tax advice on your own circumstances
- Improving the building’s insulation
If you’re not sure, just phone 07833 053749 and we’ll give you a straight answer before you book.
What we work on in Stanwell Moor
- Air-to-air heat pumps
- Homes heated by oil, LPG or gas
- Underfloor heating
- Radiator systems
- Hot water cylinders
- Air-to-water heat pumps
A customer’s words
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead