Hampshire · Heat pump installation
Air Source Heat Pumps in Standford
Expert air source heat pumps for Standford: a survey or diagnosis, a fixed price, careful work and proper paperwork. Ask us for a fixed-price quote.
- Checking emitters for a heat pump
- Planning and permitted development questions
- Moving away from fossil-fuel heating
Air source heat pumps around Standford
The middle of Standford is part of the River Wey Conservation Area. 2 conservation areas lie within a mile of central Standford. Historic England lists about 13 buildings and structures within half a mile of the centre of Standford, including Passfield House (grade II*). For a heat pump, permitted development does not apply within the grounds of a listed building, and in a conservation area the outdoor unit cannot go on a wall or roof facing a road, so we check with the planning team at East Hampshire council, which usually handles Standford where necessary. About 42 miles out from central London, Standford is part of the South East area we work across.
A heat loss calculation decides the size of heat pump your home needs.
Standford is about 7 miles south-east of Alton, in Hampshire. Properties in Standford get the same service as everywhere we cover: a look at the job first, a fixed-price quote and written records at the end. Across Hampshire, we cover 683 places, and Standford is one of them. For properties nearby, see our Guildford page, about 15 miles away.
Our nearest recent job to Standford was on Petworth Road, Haslemere (GU27), about 5 miles east: installing a Mitsubishi Electric multi-split system serving the master bedroom, two further bedrooms and the basement games room.
Streets in the area include Robin Hood Gardens, Standford Lane and Tulls Lane, all of which are in our area. Postcode districts we cover here: GU35. Neighbouring places we cover include Hollywater (1 mile south-west), Deadwater (1 mile north-west), Lindford (1 mile north-west), Headley (1 mile north-east) and Bordon (1 mile north-west). Further out, we also cover Farnborough (13 miles north), Fleet (12 miles north), Aldershot (10 miles north) and Alton (7 miles north-west).
Local landmarks in Standford
Locally, jobs take us to houses, flats and workplaces close to Mill Chase Academy, among other places. The closest station to Standford is Liphook station, about 2.9 miles south-east of the centre. Well-known places in the area include Chase Community Hospital (1.1 miles west). Open spaces near Standford include Wheeler's Down and Deadwater Valley.
Air source heat pumps for homes and businesses in Standford
We begin with a room-by-room heat loss survey. It shows how much heat each room needs on a cold day, so the heat pump and the radiators or indoor units can be sized properly. Sizing by rule of thumb is not good enough. The work covers air-to-water heat pumps, radiator systems and air-to-air heat pumps, and people most often call us about planning and permitted development questions and questions about where the outdoor unit can go.
Space for an outdoor unit is rarely an issue near Standford, so the design focuses on heat loss and radiators.
Some manufacturers make regular servicing by a qualified engineer a condition of their warranty. Where yours does, a regular service with us keeps that side in order and each visit is recorded.
- Where
- Standford (GU35)
- Region
- Hampshire
- Credentials
- NICEIC and F-Gas, MCS
- Quote
- Fixed-price quote after a site survey
- Guide price
- £8,000–£16,000 before the grant, 0% VAT on homes
- Phone
- 07833 053749
- Reviewed
- 30 October 2026
Common problems we fix in Standford
Many people look at heat pumps when an oil, LPG or gas boiler is getting old. Starting early leaves time for the survey, the design and any grant application instead of making a rushed decision when the heating stops.
Keep an eye out for any of the following:
- Checking emitters for a heat pump
- Plans to switch to electric heating with a heat pump
- Checking eligibility for a heat pump grant
Older homes near St Mark's Sacred Church may need extra checks for planning and heat loss before a heat pump is designed.
Before booking anyone
- Whether extra work needs your approval first
- Whether a new circuit is included and who certifies it
- Why the equipment they’re quoting suits the job
What else we do in Standford
Standford questions
Will you come out to Standford?
Yes, and the size of the place makes no difference to how we work. A few pictures and the postcode are enough to get things started.
Can I get the Boiler Upgrade Scheme grant in Standford?
Yes, the scheme covers homes in England, including Standford, if they qualify. It gives £7,500 towards an air-to-water or ground source heat pump, or £2,500 towards an air-to-air heat pump that replaces the fossil-fuel heating and meets the whole home’s heating need. We hold MCS certification, so the application is ours to make for you.
Will I get records for the system?
Yes. You get a written record of each visit, including F-Gas records for any refrigerant work. File them with the system’s paperwork.
Whose job is it to check the system for leaks?
The operator of the equipment, working with qualified engineers. Systems below 5 tCO2e fall outside the set leak check intervals, while larger ones need checks at least every 12 months, or every 6 months from 50 tCO2e. We’ll work out which band applies to yours.
Will I need planning consent for an air source heat pump?
That depends on your home and the unit’s position. Flats have different limits, conservation areas have extra conditions, and an Article 4 direction can remove the rights and we look at it during the survey.
How long does a heat pump installation take?
An installation takes from a couple of days to around a week, depending on the system and how much of the heating changes. The survey lets us set a firm programme, and you can call 07833 053749 or drop us a line to book it.
Will you work on another installer’s system?
Yes. We start with a proper look and tell you honestly what we find, including anything about the original installation that needs putting right. Any work is priced before it goes ahead.
How it works
Testing is the last part of the visit wherever the system can be switched on. Then we show you what we’ve done and answer any questions, and anything that needs attention later is pointed out. All told, the work takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. We plan the trip to Standford around you.
- We find out about your home and the heating you have now.
- Every room’s heat loss is worked out on site.
- The design covers the heat pump, emitters, hot water and outdoor unit.
- You get a fixed price, with any grant and the VAT set out.
- We install, commission and register the system under MCS.
Preparing for the visit
- Unlock any gate, garage or side passage we need
- Make sure someone can let us in at the agreed time
- Keep pets out of the rooms we are working in
Getting a quote
To get a fixed-price quote, phone us on 07833 053749, or email if that’s easier and tell us about the property and what you need. A few pictures make it quicker. You will hear back from us the same working day.
Advice
Why deal with it now?
The 0% VAT rate on heat pumps in homes runs until 31 March 2027, then 5% applies. If you’re thinking about a heat pump, that date is worth knowing, though the right time also depends on your home and heating. Getting the date in early helps for a place like Standford.
The cost depends on the type of system and how many units are involved, the access and the parts and time the job needs. You get a fixed price before we start, so you know where you stand.
Why book with us
- Electrical work covered by our NICEIC approval
- One number for homes and businesses across London and the South East
- MCS certified for heat pumps
- Enquiries answered the same working day
What air conditioning won’t do
We’ll always give you a straight diagnosis, so here’s what air source heat pumps won’t do:
- Getting planning permission or listed building consent on your behalf
- Grants for hybrid systems or replacements of low-carbon systems
- Disconnecting or servicing a gas boiler
Not sure which it is? You can give us a ring on 07833 053749 or use the quote form and we’ll tell you honestly before booking.
What we work on in Standford
- Air-to-water heat pumps
- Homes heated by oil, LPG or gas
- Hot water cylinders
- Underfloor heating
- Air-to-air heat pumps
- Radiator systems
What a customer said
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath