Hampshire · Heat pump installation

Heat pump installation in Bordon, Hampshire

Need air source heat pumps in Bordon? We look at the job first, give you a fixed-price quote and do the work at a time that suits you, finishing with proper records.

  • Deciding on the outdoor unit position
  • Checking eligibility for a heat pump grant
  • Ageing boilers that will need replacing

Air source heat pumps across Bordon

Signs you need air source heat pumps in Bordon

For homes with no mains gas, heated by oil or LPG, a heat pump is well worth considering. Until March 2027, an extra £1,500 is available for air source and ground source heat pumps in homes heated by oil or LPG with no mains gas, subject to the scheme rules.

If any of these sounds familiar, it’s worth a diagnosis:

  • Comparing heat pump types
  • Plans to switch to electric heating with a heat pump
  • Ageing boilers that will need replacing

Sizing comes from the heat each room loses on a cold day, not from the size of the old boiler.

Before booking anyone

  • What records you get at the end
  • Who does the electrical work, and whether they can certify it
  • Whose warranty applies, and on what terms

Questions to ask before you book

How we handle air source heat pumps in Bordon

For an air-to-water heat pump, the price is £8,000–£16,000 (0% VAT on homes), before the grant. In England and Wales, the Boiler Upgrade Scheme offers a £7,500 grant towards an eligible air-to-water installation, and as the installer we apply for it on your behalf. Not every home qualifies, so we check eligibility before you commit. We are often asked to deal with moving away from fossil-fuel heating and questions about listed buildings or conservation areas, on homes heated by oil, LPG or gas, air-to-air heat pumps and radiator systems.

Older homes around Bordon can be draughty or have solid walls, which a heat loss calculation will show. Sometimes insulating first makes more sense.

Some manufacturers make regular servicing by a qualified engineer a condition of their warranty. Where yours does, a regular service with us keeps that side in order, and every service is written up.

Location
Bordon (GU35)
Region
Hampshire
Certified
F-Gas certified company, NICEIC approved, MCS
Costs
£8,000–£16,000 before the grant, 0% VAT on homes
Pricing
Fixed-price quote after a site survey
Telephone
07833 053749
Page updated
30 October 2026

Why deal with it now?

Choosing between air-to-water and air-to-air is easier with the facts. Air-to-water heats radiators and hot water, and can attract a £7,500 grant where eligible; air-to-air heats and cools rooms, and only qualifies for £2,500 under strict conditions. We explain which makes sense for you. Planning ahead for a job near Bordon means we can arrive with everything needed.

The price reflects the work, not guesswork. That’s why we look at the job first, from pictures or on a survey, and why the quote is fixed before any work starts.

What you get with us

  • Electrical work covered by our NICEIC approval
  • We reply to enquiries the same working day
  • MCS certified for heat pumps
  • Emergency calls taken 24/7

See how installs are priced and how to check a contractor.

Bordon questions

Can you do air source heat pumps in Bordon?

Yes, Bordon is within the area we cover. To start, call 07833 053749 or write to us at info@aircondoctor.co.uk with a few photos.

Will you come out to Bordon?

Yes, smaller places are covered as well as towns. Visits to smaller places are planned so the engineer arrives with what the job needs.

Do I need to service the system to keep the warranty?

Each manufacturer decides. Where servicing is a condition, a missed service could give the manufacturer grounds to refuse a claim and we will tell you what your brand asks for.

Whose job is it to check the system for leaks?

The F-gas rules share it between the equipment’s operator and the engineers who work on it. The interval depends on the refrigerant charge, measured in tonnes of CO2 equivalent: at least yearly for 5 to under 50 tCO2e, and every 6 months for 50 to under 500 tCO2e.

Should I choose air-to-water or air-to-air?

Air-to-water heats radiators or underfloor heating and hot water; air-to-air heats rooms through indoor units and can cool them. With air-to-air, hot water needs another source and the survey helps decide.

Do I need new radiators for a heat pump?

We find out during the survey. Where a radiator is already large enough, it stays and any changes are in the quote.

What accreditations do you have?

We hold F-Gas company certification, which the law requires for any business working on refrigerant. NICEIC approval, MCS certification for heat pumps and Checkatrade membership sit alongside it.

How the visit works

The visit goes in the diary at a time that works for you, and we keep you posted if anything changes. When we arrive, we check the job against the survey or the photos you sent. Anything unexpected is raised with you before we go further. After that, it takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. We load the van from the survey notes so the work in Bordon can be done in one go where possible.

  1. First, a chat about the property and your goals for the heating.
  2. We survey for heat loss and look at radiators, cylinder space and outdoor unit options.
  3. You get our view on the right type for the house, and on whether the Boiler Upgrade Scheme applies.
  4. We install the heat pump and connect it up.
  5. We commission it, complete the MCS certificate and show you how to use it.

Getting ready for the visit

  • Find the manual or the paperwork for the system, if you have it
  • Name a contact who can meet us at the agreed time
  • Clear the space around the indoor unit, or where it will go

Getting a quote

VAT is set out clearly on every quote, with the rate that applies to your job. VAT can differ between homes and businesses and between kinds of work, so we confirm it on the quote. For a fixed-price quote, phone 07833 053749.

Get a quick quote

Read more

Air source heat pumps around Bordon

At about 43 miles from central London, Bordon sits inside the area we cover across London and the South East.

Older homes near St Mark's Sacred Church may need extra checks for planning and heat loss before a heat pump is designed.

Bordon is about 10 miles south-west of Aldershot, in Hampshire. Across the GU35 area, our engineers can take on air source heat pumps. Our Hampshire coverage runs to 683 places, and Bordon is one of them. You can also see our page for Guildford, roughly 16 miles from Bordon.

Not far from Bordon, a recent job of ours was on Petworth Road, Haslemere (GU27), about 6 miles east: installing a Mitsubishi Electric multi-split system serving the master bedroom, two further bedrooms and the basement games room.

Getting to Bordon is easy by the A325 and B3002. Work in GU35 follows the same survey, fixed-price quote and written records as everywhere else we cover. Neighbouring places we cover include Pinewood Village (1 mile north), Deadwater (1 mile east), Whitehill (1 mile south), Lindford (1 mile north-east) and Hollywater (1 mile south-east). Within a short drive, we also cover Basingstoke (15 miles north-west), Farnborough (13 miles north), Fleet (11 miles north) and Aldershot (10 miles north-east).

Near you in Bordon

Typical jobs here are in properties near Mill Chase Academy and the streets around them. For rail, the closest station is Liphook station, roughly 4.1 miles south-east of the centre. Nearby you will also find The Romany Museum (3.6 miles west) and Chase Community Hospital (0.6 miles south). For a walk, there’s Selborne Hill and Deadwater Valley.

Map of Bordon © OpenStreetMap contributors

Let and managed properties

Whether it’s one property or many, you get the same standard: a look at the job first, a fixed-price quote, work booked with the occupier and written records afterwards.

We also work for facilities teams in offices, schools and public buildings in Bordon and across Hampshire. Work can be phased by floor, zone or building around the people who use them.

From one of our customers

“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”

Sarah M., East Grinstead

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead