Hampshire · Heat pump installation

Heat pump installation in Deadwater, Hampshire

Air source heat pumps for Deadwater, from F-Gas certified engineers, with warranty terms explained brand by brand. Enquiries answered the same working day.

  • Radiators that may be too small for a heat pump
  • Questions about listed buildings or conservation areas
  • Questions about where the outdoor unit can go

Air source heat pumps in Deadwater

How we handle air source heat pumps in Deadwater

Air-to-air heat pumps can qualify for a £2,500 Boiler Upgrade Scheme grant, but only in some cases. It has to replace the fossil-fuel heating, cover the whole heating demand, be fitted by an MCS certified installer and be in a home, so an add-on next to a boiler is not eligible. The work covers underfloor heating, radiator systems and homes heated by oil, LPG or gas, and common reasons people get in touch are wanting to stop using oil, LPG or gas for heating and not knowing whether a grant applies.

Cottages and older homes near Deadwater can lose heat faster, which a heat loss calculation will show. Sometimes insulation first is the better investment.

Whatever the visit, you get a written record: commissioning details and F-Gas records for a new system, a note of the fault and the fix for a repair, or a service record. File it with the manual so it’s to hand next time.

Place
Deadwater (GU35)
Region
Hampshire
Accreditations
NICEIC approved, F-Gas certified, MCS
Typical price
£8,000–£16,000 (0% VAT on homes), before the grant
Response
We reply the same working day
Quotes
A fixed-price quote up front
Call
07833 053749
Checked
30 October 2026

The process

Think of the visit in three stages: look, put right and sign off. First we check the system or the space against the plan, then we do the work, and finally we test, record and explain. The middle part takes longest, which takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. We load the van from the survey notes so the work in Deadwater can be done in one go where possible.

  1. We start with your plans and the property.
  2. A survey covers heat loss, radiators, hot water and where the outdoor unit could sit.
  3. We explain which type of heat pump suits the home and whether a grant could apply.
  4. The system is installed and connected to the controls.
  5. The job ends with commissioning, the MCS certificate and a walk through the controls.

Before we arrive

  • Give us access to the outside wall, roof or yard where the outdoor unit sits
  • Have the make and model of any existing unit to hand
  • Tell us about parking and loading

Get a fixed-price quote

For air source heat pumps in Deadwater, give us a ring on 07833 053749 or email us. Let us know the type of property and what you need, plus some pictures if they’re to hand. We reply the same working day.

Get a quick quote

Advice

Common problems we fix in Deadwater

People also ask about air-to-air heat pumps because they heat and cool. They heat rooms through wall, floor or ceiling units, and can cool them when it’s hot. The grant only applies in some cases, so we check first.

Common reasons people call us include:

  • Checking eligibility for a heat pump grant
  • No space for a hot water cylinder
  • Deciding on the outdoor unit position

Sizing comes from the heat each room loses on a cold day, not from the size of the old boiler.

What your quote should include

  • Proof of F-Gas company certification
  • Whether anyone has checked the property or the system first
  • Exactly what the price includes, from supply and fitting to commissioning

How to choose an air conditioning engineer

What air source heat pumps cannot fix

Some problems need a different service or another trade:

  • Tax advice on your own circumstances
  • Gas boiler work, such as disconnecting the old boiler, which needs a Gas Safe registered engineer
  • Planning decisions, which rest with the council

Not sure which it is? You can call 07833 053749 and we will tell you honestly.

What we work on in Deadwater

  • Air-to-water heat pumps
  • Hot water cylinders
  • Homes heated by oil, LPG or gas
  • Radiator systems
  • Underfloor heating
  • Air-to-air heat pumps

Heat pumps in Deadwater: local notes

About 42 miles out from central London, Deadwater is part of the South East area we work across.

Period properties close to St Mark's Sacred Church can suit a heat pump, though insulation and any heritage protection are checked first.

Deadwater is about 1 mile east of Bordon, in Hampshire. Across the GU35 area, our engineers can take on air source heat pumps. Deadwater is one of 683 towns, villages and districts in Hampshire where we work. Guildford is in our area too, about 15 miles from Deadwater.

Our nearest recent job to Deadwater was on Petworth Road, Haslemere (GU27), about 6 miles east: installing a Mitsubishi Electric multi-split system serving the master bedroom, two further bedrooms and the basement games room.

Here we cover the GU35 postcode area. From Alma Road, Varna Road and Rowan Road to the smaller roads in between, nowhere is left out. Places around Deadwater that are also on our list: Lindford (1 mile north-east), Bordon (1 mile west), Hollywater (1 mile south), Standford (1 mile south-east) and Pinewood Village (1 mile north-west). Larger places within reach include Basingstoke (15 miles north-west), Farnborough (13 miles north), Fleet (11 miles north) and Aldershot (10 miles north-east).

Local landmarks in Deadwater

Typical jobs here are in properties near Weyford Nursery and Primary School. The closest station to Deadwater is Liphook station, about 3.6 miles south-east of the centre. A little further out are Chase Community Hospital (0.7 miles south-west). Not far away are Deadwater Valley and Selborne Hill.

Map of Deadwater © OpenStreetMap contributors

Before you call an engineer

Before you call us about a fault, a few checks can save a visit: check the mode, the set temperature, the remote’s batteries and the breaker. If the breaker trips a second time, leave it off and call us on 07833 053749 or email us.

Refrigerant is off limits for anyone without the right qualifications. The law requires anyone working on equipment containing F gas to hold the right qualifications, and the company to be certified, and escaping refrigerant can cause cold burns. If you suspect a leak, switch the system off and call us.

FAQs for Deadwater

Is a heat pump in Deadwater permitted development?

There’s no single answer: the building and the outdoor unit position decide it. Historic England lists about 3 buildings and structures within half a mile of the centre of Deadwater. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit can’t face a road. Where needed, we check with the local planning authority (for Deadwater, normally East Hampshire council).

Does the Boiler Upgrade Scheme cover homes in Deadwater?

Yes, the scheme covers homes in England, including Deadwater, if they qualify. The grant is £7,500 for an air source (air-to-water) heat pump and £2,500 for an air-to-air system that replaces the existing fossil-fuel heating. We hold MCS certification, so the application is ours to make for you.

What warranty do I get?

It’s the manufacturer’s, and the terms are theirs. Some brands make regular servicing a condition, so keep your service records.

Will my radiators work with a heat pump?

It depends on each radiator and the room it heats. At the lower temperatures a heat pump uses, radiators need more surface so we check every radiator against the room’s heat loss.

Do you work on systems someone else installed?

Yes. We look at it first and tell you what we find, including any issues with how it was fitted. Any work is priced before it goes ahead.

What does F-Gas certified mean?

Anyone installing, repairing or servicing the refrigerant side must be qualified, and their company certified. It’s worth checking before booking and we will gladly show you ours.

Do you work in Deadwater?

Yes. We work across Greater London, Surrey, Kent, East and West Sussex, Hampshire, the Isle of Wight, Berkshire, Buckinghamshire, Oxfordshire, Hertfordshire and Essex, Deadwater included.

From one of our customers

“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”

Sarah M., East Grinstead

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead