Hampshire · Air conditioning installation
Air conditioning installation in Deadwater, Hampshire
For air conditioning installation in Deadwater, one call is all it takes, from the first look to sign-off. An F-Gas certified company, NICEIC approved, on Checkatrade.
- A business premises that overheats in summer
- Fans and portables that don’t keep up
- A loft conversion that’s too warm to use
About our air conditioning in Deadwater
Single-room systems are typically £1,200–£2,200 + VAT, two rooms on a multi-split £2,800–£4,500 + VAT, and three to five rooms £4,500–£8,500 + VAT. Those ranges include supply, installation, commissioning and F-Gas documentation, and commercial VRF systems are priced after a survey. Need an air conditioning installer for Deadwater? We are based in East Grinstead and cover London and the South East, with a fixed-price quote before any work starts.
In a smaller place like Deadwater, most installs are in houses and cottages, often with gardens, so there’s normally space for the outdoor unit. The bigger questions are the wall construction and the route back to the consumer unit.
Warranty on the equipment is the manufacturer’s own, on the manufacturer’s terms, and we set them out on your quote. Terms differ from brand to brand, and we’re happy to talk you through them.
- Place
- Deadwater (GU35)
- Wider area
- Hampshire
- Credentials
- NICEIC and F-Gas
- Price
- A fixed price before work begins
- Response
- We reply the same working day
- Price guide
- One room: £1,200–£2,200 + VAT
- Telephone
- 07833 053749
- Checked
- 30 October 2026
Homes in Deadwater and air conditioning
At about 42 miles from central London, Deadwater sits inside the area we cover across London and the South East.
Older streets near St Mark's Sacred Church may fall within a conservation area, so we check the planning position before choosing where the outdoor unit goes.
Deadwater is about 1 mile east of Bordon, in Hampshire. If you need air conditioning in Deadwater, it’s easy to get a fixed-price quote: please phone 07833 053749 or write to us at info@aircondoctor.co.uk. Our area covers London and the South East, including Deadwater. Count every place we list in Hampshire and you reach 683, with Deadwater on the list. The nearest of our city pages is Guildford, around 15 miles from Deadwater.
Our nearest recent job to Deadwater was on Petworth Road, Haslemere (GU27), about 6 miles east: installing a Mitsubishi Electric multi-split system serving the master bedroom, two further bedrooms and the basement games room. More about it
Alma Road, Varna Road and Rowan Road and the roads off them are all inside our area. All of GU35 is covered, from busy streets to back roads. Other places close to Deadwater include Lindford (1 mile north-east), Bordon (1 mile west), Hollywater (1 mile south), Standford (1 mile south-east) and Pinewood Village (1 mile north-west). We also work in nearby towns such as Basingstoke (15 miles north-west), Farnborough (13 miles north), Fleet (11 miles north) and Aldershot (10 miles north-east).
What’s near Deadwater
Typical jobs here are in properties near Weyford Nursery and Primary School and the streets around them. The closest station to Deadwater is Liphook station, about 3.6 miles south-east of the centre. Well-known places in the area include Chase Community Hospital (0.7 miles south-west). The countryside around Deadwater includes Deadwater Valley and Selborne Hill.
Nearby places to Deadwater
Also in Deadwater
What air conditioning will not do
Air conditioning cannot fix everything, and we’ll tell you before any work starts. It doesn’t solve:
- Draughts and missing insulation
- Work that needs permission from a landlord or the council
- Central heating repairs
If in doubt, call us on 07833 053749, or email if that’s easier and we will say what we think.
What we work on in Deadwater
- Ducted systems
- Multi-split systems
- Wall-mounted split systems
- Ceiling cassettes
- Air-to-air heat pumps
- VRF systems
After we’ve gone
Aftercare is straightforward, and it makes the next visit easier:
- Leave space around the outdoor unit
- Have the system serviced once a year
- Choose a comfortable set temperature rather than the lowest
Commissioning is the last stage: every mode is tested before we go. Once it’s running properly, we take you through the controls and settings, so you’re confident using it.
Give the outdoor unit room to breathe. Leaves, plants, bins and stored items around it restrict the airflow, and the system has to work harder as a result.
Your questions about air conditioning in Deadwater
Is Deadwater within the area you cover?
We do. Villages and hamlets get the same service as the bigger towns. Visits to smaller places are planned so the engineer arrives with what the job needs.
Will air conditioning in Deadwater need planning permission?
That depends on the building and where the outdoor unit goes. Historic England lists about 3 buildings and structures within half a mile of the centre of Deadwater. Since 2025, an air-to-air heat pump on a house can count as permitted development if it meets the conditions and is not used only for cooling. Listed buildings still need consent, and in a conservation area a road-facing wall or roof isn’t allowed under those rules. If there’s any doubt, we ask East Hampshire council, which is normally the planning authority for Deadwater.
Is the equipment covered by a warranty?
The manufacturer’s warranty, on the manufacturer’s terms. Each brand sets its own conditions and periods, so we explain them on your quote.
Can you set up regular servicing?
Yes. Maintenance contracts are part of what we do, set at the interval the system and the manufacturer’s terms need. Every visit is recorded and F-Gas records kept where they apply.
What size air conditioning unit do I need?
Floor area is only part of it. Windows, the direction the room faces, the roof above and the people and equipment in it all count, and we take them all into account on the survey.
Which manufacturers do you install and repair?
The main ones, including Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. For a new system, we suggest the make and model that suit the property and tell you why.
Do you look at the job first?
Yes. Photos often do the job for simple work, while larger systems and faults that need testing are seen on site.
Do you need air conditioning in Deadwater?
Rooms in the roof are often the hardest to keep cool. The roof takes the full force of the sun, and warm air rises from the floors below, so a bedroom or office under the roof can stay warm well into the night.
Reasons to give us a call include:
- Uncertainty over the right type and size of system
- Rooms heated by plug-in heaters
- An office, shop or restaurant that is uncomfortable for staff and customers
A loft bedroom or a glazed extension is often the room that prompts the first call.
Questions to ask before you book
- What’s in the price and what isn’t
- What happens if the job turns out to be different on the day
- What the manufacturer’s warranty covers and for how long
How the visit works
Anything involving refrigerant is handled by F-Gas qualified engineers, as the law requires, while the electrical side is covered by our NICEIC approval. So on the day, you do not need a separate electrician for the electrical side. On site, it takes anything from a day for one room to several days for a multi-room or ducted system. Photos of the room and the outside wall help us plan a job near Deadwater.
- First the diagnosis: a survey of the rooms, the walls, the outside and the electrics.
- Next, a recommendation for each room and a fixed price.
- The treatment: units fitted, pipework and drain routed, and the electrics installed.
- Checks: a pressure test for leaks, then a vacuum to clear moisture.
- The sign-off: commissioning, a walk through the controls, and the F-Gas records and warranty details.
Preparing for the visit
- Unlock any gate, garage or side passage we need
- Move furniture away from the wall where we will be working
- Tell us about any building rules, permits or sign-in
Getting a quote
Every quote starts with a look at the job, either on a site survey or, for simple jobs, from your photos and details. After that, we send a fixed price before any work starts.
Related advice
From one of our customers
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath