Kent · Heat pump installation
Nackington air source heat pumps
Air source heat pumps in and around Nackington, from a site survey or diagnosis to sign-off and a fixed price agreed before any work starts.
- Working out whether radiators need upsizing
- Working out where a cylinder could go
- Moving away from fossil-fuel heating
How we handle air source heat pumps in Nackington
In England, an air source heat pump on a house can often go in under permitted development rights. The conditions include an outdoor unit of no more than 1.5 m³ and compliance with MCS 020(a), and the unit cannot be used solely for cooling or sit within the curtilage of a listed building. We look at the planning position for your home during the survey. The work covers homes heated by oil, LPG or gas, hot water cylinders and radiator systems, and people most often call us about checking whether planning permission is needed and an oil, LPG or gas boiler near the end of its life.
For a home around Nackington that’s off mains gas and heated by oil or LPG, an extra £1,500 is available through the Boiler Upgrade Scheme until March 2027.
For a fault on a system that may still be under warranty, send us the make, model and installation date. We will explain how the manufacturer’s terms are likely to apply before anything chargeable is done.
- Location
- Nackington (CT4)
- Region
- Kent
- Approvals
- NICEIC approved, F-Gas certified, MCS
- Prices
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Pricing
- A fixed-price quote up front
- Phone
- 07833 053749
- Checked
- 30 October 2026
Air source heat pumps in Nackington: the local picture
About 54 miles out from central London, Nackington is part of the South East area we work across.
A heat loss calculation decides the size of heat pump your home needs.
Nackington is about 2 miles south of Canterbury, in Kent. From the centre of Nackington to the outskirts, we cover air source heat pumps, from a single room to a whole building. Across Kent, we cover 922 places, and Nackington is one of them. Our Bromley page covers places nearby, about 47 miles away.
If your postcode is in CT4, the property is within reach. We also cover the places around Nackington: Street End (1 mile south-west), Stuppington (1 mile north-west), Lower Hardres (1 mile south), Pett Bottom (2 miles south) and Wincheap (2 miles north-west). Within a short drive, we also cover Ashford (12 miles south-west), Dover (12 miles south-east), Folkestone (12 miles south) and Ramsgate (15 miles north-east).
Landmarks near Nackington
Around Nackington, our work takes us to homes and businesses near St. Anselm's Catholic School and the streets around them. Nackington’s nearest station is Canterbury East station, about 1.7 miles north of the centre. A little further out are Canterbury Castle (1.9 miles north) and Kent and Canterbury Hospital (1.1 miles north). Open spaces near Nackington include Blean Woods RSPB Reserve.
What we do, step by step
Each visit runs to the same pattern: agree the plan on site, put the dust sheets down, do the work, test what we have done and explain it all to you. The visit itself takes a few days for most air-to-water installations, with air-to-air systems often quicker. Seeing the property in pictures first means the trip to Nackington can be planned properly.
- We find out about your home and the heating you have now.
- Every room’s heat loss is worked out on site.
- The design covers the heat pump, emitters, hot water and outdoor unit.
- You get a fixed price, with any grant and the VAT set out.
- Then it’s fitted, commissioned and registered with MCS.
How to prepare
- Dig out any previous service or F-Gas records
- Mention any managing agent or landlord rules we need to follow
- Tell us about access, such as roof hatches, high walls or locked plant areas
How to get a quote
Photos are the fastest route to a quote: the inside and outside of the property where the work is, plus the rating plate of any unit already there. Tell us the address and what you need, and many jobs can be priced from that.
Related advice
Places near Nackington
Other services in Nackington
Pricing air source heat pumps in Nackington
You will get a fixed price before any work starts. It’s based on:
- The size of the job
- The distance and route between the indoor and outdoor units
- A single visit or a regular plan
Homes, offices, shops and public buildings are all priced the same way: the equipment, the access, the work involved and the time it takes. Call for a fixed-price quote and we’ll go through it with you.
Helping us quote
To speed up the quote, please include:
- Where the outdoor unit is, or where you’d like it
- Any previous service or F-Gas records
- Your consumer unit or fuse board
To help us quote: the address and the type of property, photos of the rooms or units, the brand and model of anything already fitted and any symptoms, from error codes to drips. Then ring us on 07833 053749 or send an email.
Common questions in Nackington
Is Nackington within the area you cover?
Yes, smaller places are covered as well as towns. Send a few details and pictures, and we reply the same working day.
Can I fit a heat pump in Nackington without planning permission?
It depends on the property. The centre of Nackington is in the Nackington Conservation Area. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit can’t face a road. Where necessary, we check with the local planning authority (for Nackington, usually Canterbury City council).
Which type of heat pump is right for my home?
Air-to-water replaces the boiler for heating and hot water, while air-to-air heats and cools rooms. The survey helps decide. Both are part of what we install.
Do you work for landlords and businesses?
Yes. From a single let flat to offices, shops and public buildings, the approach is the same: a look first, a fixed-price quote and written records.
Will my radiators work with a heat pump?
It varies from room to room. The survey compares each radiator with the room’s needs, so the quote covers any changes.
Can I fit air conditioning or a heat pump myself?
Anything that involves the refrigerant needs an F-Gas qualified engineer from a certified company. That is the law, not just our preference, and manufacturers expect it for their warranty too. We can quote for the whole job, from supply to commissioning.
Do you provide F-Gas records?
Yes, on every job. New installations come with commissioning details, F-Gas records and warranty information, and repairs and services get a record of the work.
Owner checks or an engineer?
Owner care supports servicing; it doesn’t replace it. Clean filters and a clear outdoor unit help the system run as it should, but the refrigerant circuit, the electrics and the parts you cannot see still need an engineer at the interval the manufacturer recommends.
On air conditioning, the filters in the indoor unit are usually the one part owners can clean where the manufacturer’s manual explains how. They come out, get a gentle clean and go back only when they’re dry. On a heat pump, the equivalent is keeping the outdoor unit clear and checking the controls.
When to call us in Nackington
Some homes heated by electric heaters or storage heaters consider a heat pump instead. A survey shows whether a heat pump suits the property and what would need to change, and we explain the grant position for your home.
These are the situations we see most often:
- A boiler that’s getting old
- Working out whether radiators need upsizing
- Replacing a combi boiler with a heat pump
If your home is one of the older properties near Church of St Mary, the survey checks whether it’s listed or in a conservation area before the outdoor unit position is chosen.
Questions to ask before you book
- If the figure could change on the day
- Whether testing, commissioning and paperwork are included
- What the manufacturer’s warranty covers and for how long
From one of our customers
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath