Brighton and Hove · Heat pump installation
Heat pump installers in Moulsecoomb
Air source heat pumps in Moulsecoomb from an F-Gas certified company, with warranty terms explained brand by brand. We reply to enquiries the same working day.
- Finding a place for the outdoor unit
- Plans to switch to electric heating with a heat pump
- Deciding which kind of heat pump suits the home
Air source heat pumps in Moulsecoomb, done properly
In England, an air source heat pump on a house can often go in under permitted development rights. The conditions include an outdoor unit of no more than 1.5 m³ and compliance with MCS 020(a), and the unit cannot be used solely for cooling or sit within the curtilage of a listed building. We look at the planning position for your home during the survey. If you are dealing with comparing heat pump types and not knowing whether a grant applies, we can help.
Cottages and older homes near Moulsecoomb can lose heat faster, which a heat loss calculation will show. Sometimes insulating first makes more sense.
Whatever the visit, you get a written record: commissioning details and F-Gas records for a new system, a note of the fault and the fix for a repair, or a service record. Keep it with the system’s paperwork so it’s to hand next time.
- Location
- Moulsecoomb (BN2, BN1)
- Wider area
- Brighton and Hove
- Accreditations
- NICEIC and F-Gas, MCS
- Quotes
- Fixed, in writing
- Guide price
- £8,000–£16,000 before the grant, 0% VAT on homes
- Telephone
- 07833 053749
- Last updated
- 30 October 2026
Honest limits
We’ll always give you a straight diagnosis, so here’s what this work can’t put right:
- Improving the building’s insulation
- Planning decisions, which rest with the council
- Tax advice on your own circumstances
Not sure which it is? You can phone 07833 053749, or email if that’s easier and we will tell you honestly before you book.
What we work on in Moulsecoomb
- Radiator systems
- Air-to-air heat pumps
- Underfloor heating
- Air-to-water heat pumps
- Homes heated by oil, LPG or gas
- Hot water cylinders
Air source heat pumps in Moulsecoomb: the local picture
The coast is only about 3 miles from Moulsecoomb. Coastal sites are worth mentioning at the survey, as salt air affects the outdoor unit and its fixings. About 43% of homes in Moulsecoomb and the neighbourhoods around it date from 1945 to 1972, according to Valuation Office Agency council tax records. For homes of that age, the survey checks the insulation, the radiators and the hot water setup.
Homeowners near Moulsecoomb station often ask whether a heat pump can take over from the boiler, and the heat loss survey answers that.
Moulsecoomb is about 1 mile north-east of Brighton, in Brighton and Hove. For air source heat pumps in and around Moulsecoomb, please ring 07833 053749 or email us for a fixed-price quote. Our area covers London and the South East, including Moulsecoomb. 30 places in Brighton and Hove are on our list.
Our nearest recent job to Moulsecoomb was on New Road, Brighton (BN1), about 1 mile south-west: installing individual wall-mounted Panasonic units in all 22 guest rooms, plus two cassette units in the restaurant and a dedicated unit for the server room at basement level.
Natal Road, Lewes Road and The Avenue and the roads off them are all inside our area. Jobs in BN2 and BN1 are looked at, quoted and booked the same way as anywhere else. Other places close to Moulsecoomb include Bevendean (1 mile south-east), Hollingdean (1 mile west), Hollingbury (1 mile north-west), Brighton (1 mile south-west) and Hanover (1 mile south-west). Larger places within reach include Brighton and Hove (4 miles west), Hove (3 miles west), Aldrington (4 miles west) and Hangleton (4 miles west).
Around Moulsecoomb
We fit and service air conditioning in homes and premises around The Bevy pub, University of Sussex Library and Brighton Aldridge Community Academy and the streets around them. There’s a railway station in Moulsecoomb itself: Moulsecoomb station. A little further out are Churchill Square (2.3 miles south-west) and Clayton Castle (4.6 miles north). The countryside around Moulsecoomb includes Bevendean Down and Newmarket Hill.
Places near Moulsecoomb
More services for Moulsecoomb
Common questions in Moulsecoomb
Does sea air affect air conditioning in Moulsecoomb?
It can. Moulsecoomb is within about 3 miles of the coast, and salt air speeds up corrosion on outdoor units. We site outdoor units out of the worst of the sea wind where possible and can suggest models with corrosion protection where the manufacturer offers it.
Is the heat pump grant available in Moulsecoomb?
Moulsecoomb is covered, as the scheme runs across England and Wales. For an air-to-water heat pump the amount is £7,500; an air-to-air system can get £2,500 if it replaces the fossil-fuel heating outright, meets the home’s full heating demand and is not an add-on to a boiler. The installer applies, and we are MCS certified.
Do you work for landlords and businesses?
Yes. We work for homeowners, landlords, letting and managing agents, and businesses of every size in Moulsecoomb and across Brighton and Hove. Let us know who the records should go to.
Is there a survey before the work?
Yes. For simple jobs, pictures and a few details can be enough, while bigger systems and repairs that need testing get a visit.
Who has to arrange F-Gas leak checks?
The operator of the equipment, working with qualified engineers. Larger systems need regular checks: at least every 12 months from 5 tCO2e and every 6 months from 50 tCO2e. We can tell you which band your system falls into.
How much does an air source heat pump cost?
An air-to-water heat pump costs £8,000–£16,000 (0% VAT on homes) before the grant. Eligible homes in England and Wales can get £7,500 through the Boiler Upgrade Scheme though not every home qualifies.
Will my radiators work with a heat pump?
It depends on each radiator and the room it heats. Heat pumps run at lower flow temperatures, so radiators give out less heat so we check every radiator against the room’s heat loss.
What you can do yourself, and what needs us
Good habits make our visits easier, not unnecessary. Simple care keeps the air moving through the system, but the refrigerant circuit, the electrics and the parts you can’t see still need an engineer at the interval the manufacturer recommends.
There are a few things you can safely do yourself: keeping the outdoor unit clear, checking the mode and set temperature, and the routine cleaning in the manual. Anything inside the units, the electrics and the refrigerant is engineer’s work.
How the visit works
The visit has three parts, a bit like a doctor’s appointment: diagnose, treat and sign off. First comes a careful look at the system or the space, then the work itself, and finally everything is tested, recorded and explained. The middle part takes longest, and that takes a few days on site, depending on the cylinder, the radiators and the pipework involved. Getting to the outside of the property matters more than parking in a place like Moulsecoomb.
- You tell us about the home and what you want from a heat pump.
- The survey checks heat loss, emitters, hot water and the outdoor unit position.
- You get our view on the right type for the house, and on whether the Boiler Upgrade Scheme applies.
- Installation follows on the agreed dates.
- The job ends with commissioning, the MCS certificate and a walk through the controls.
Before we arrive
- Move furniture away from the wall where we will be working
- Let us know if the building has a permit or sign-in process
- Make sure we can reach the consumer unit or fuse board
How to get a quote
Some jobs can be priced from photos, while others need a survey. Bigger systems, commercial sites and awkward pipe routes are normally surveyed on site. Either way, the quote is fixed before anything goes ahead.
Advice
What we’re called out for in Moulsecoomb
The Boiler Upgrade Scheme has made people ask whether their home could qualify. Eligibility depends on the property, the system and the scheme rules, so we check before you commit.
Most people get in touch when they notice one of these:
- Working out whether radiators need upsizing
- An oil, LPG or gas boiler near the end of its life
- Checking whether planning permission is needed
Older homes near St. Andrew's may need extra checks for planning and heat loss before a heat pump is designed.
What your quote should include
- The make and model of any parts or equipment being quoted
- If the figure could change on the day
- Whether they looked at the job before pricing it
A customer’s words
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath