Southampton · Heat pump installation

Millbrook air source heat pumps

For air source heat pumps in Millbrook, choose an F-Gas certified, NICEIC approved company. Fixed-price quotes and a 24/7 emergency line.

  • Moving away from fossil-fuel heating
  • Questions about where the outdoor unit can go
  • An oil, LPG or gas boiler near the end of its life

Air source heat pumps in Millbrook and nearby

Why act early in Millbrook

A heat pump sized without a proper heat loss survey can struggle in cold weather or run inefficiently. Doing the survey properly from the start avoids that. An early booking makes the visit to Millbrook easier to arrange.

The price reflects the work, not guesswork. That’s why every job is looked at first, and why the quote is fixed before we start.

Why people in Millbrook choose us

  • A reply the same working day
  • One number for homes and businesses across London and the South East
  • A site survey and a fixed-price quote
  • MCS certified heat pump installers

See how installs are priced and our accreditations.

Air source heat pumps in Millbrook, done properly

As an MCS certified installer, we fit air source heat pumps for homes in Millbrook and the rest of Southampton. Air-to-water systems feed your radiators or underfloor heating and hot water cylinder, while air-to-air systems heat rooms directly through indoor units and can cool them too. We will explain which type fits your home and why. If you’re dealing with radiators that may be too small for a heat pump and not knowing whether a grant applies, we can help.

Whether a home near Millbrook has mains gas makes a difference to the grant. Homes heated by oil or LPG with no mains gas can get an extra £1,500 on the Boiler Upgrade Scheme until March 2027.

Nothing is signed off by word of mouth: commissioning details for an installation, a fault and repair note for a repair, or a record of the service. File it with the manual so it’s to hand next time.

Location
Millbrook (SO15, SO16)
Region
Southampton
Price guide
Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
Credentials
NICEIC and F-Gas, MCS
Quotes
Fixed after a survey or photos
Phone
07833 053749
Page updated
30 October 2026

How the visit works

Wherever the system can be run before we leave, we run it and check it in operation. Then we explain what was done and answer your questions, and anything that needs a follow-up is pointed out there and then. All told, the work takes from a couple of days to around a week, depending on the system and how much of the heating changes. Visits to a place like Millbrook are planned ahead, so we arrive with what the job needs.

  1. We find out about your home and the heating you have now.
  2. We measure heat loss for every room.
  3. We design the system, check the radiators and cylinder and look at the outdoor unit position.
  4. Cost, grant and VAT appear on one fixed-price quote.
  5. Installation, commissioning and MCS registration complete the job.

Getting ready for the visit

  • Plan for pets to be kept clear during the visit
  • Find the manual or the paperwork for the system, if you have it
  • Tell us about parking and loading

Getting a price

Photos are the fastest route to a quote: the room or the existing unit, the outside wall or roof where the outdoor unit sits or would go, and the label on any existing unit. Tell us the address and what you need, and simple jobs can often be priced without a visit.

Get a price

Advice

What affects the quote in Millbrook

The price is fixed before any work begins. It takes into account:

  • One-off work versus a regular service cycle
  • Access, including height, roofs and ladders
  • What kind of system it is

Homes, offices, shops and public buildings are all priced the same way: the equipment, the access, the work involved and the time it takes. Ask for a fixed-price quote and we will go through it with you.

Helping us quote

When you contact us, it’s useful to have:

  • Your consumer unit or fuse board
  • Photos showing the indoor unit and the space around it
  • Where the property is and what kind of building it is

For a fixed-price quote, give us a ring on 07833 053749 or use the quote form with the address and a few details about the rooms or units involved. A few photos make it quicker. We reply to enquiries the same working day.

Keeping the system healthy

How well a system lasts depends on use and care. Here’s what we suggest:

  • Diary the next service
  • Use the settings explained at handover
  • Check what your manufacturer’s warranty asks of you

Equipment warranties come from the manufacturer. We go through the conditions with you, including any servicing they ask for.

A well-insulated home helps a heat pump because it reduces the heat the system needs to supply.

Questions from Millbrook

Do you cover smaller places like Millbrook?

Yes. Millbrook is within the area we cover across London and the South East. A few pictures and the postcode are enough to get things started.

Can I get the Boiler Upgrade Scheme grant in Millbrook?

Yes, if the home and the heat pump meet the scheme’s rules: Millbrook is in England, where it applies. Air-to-water and ground source systems attract £7,500. Air-to-air gets £2,500, but only where it takes over from fossil-fuel heating and covers the whole home’s heating demand. We hold MCS certification, so the application is ours to make for you.

Do you offer maintenance contracts?

Yes. Send details of the systems and how they’re used and we’ll propose a schedule and quote for it. Leak checks required by the F-gas rules can be built in for larger systems.

Do you offer emergency call-outs?

Yes, 24/7. Call the emergency line and tell us the make, the symptoms and any error code, and we will advise on what to do next.

Will I need planning consent for an air source heat pump?

Under the Planning Portal rules, a heat pump on a house can often be permitted development. Listed buildings and their curtilages are excluded, and listed building consent is a separate matter. We check what applies to you.

Do I need new radiators for a heat pump?

We find out during the survey. Where a radiator is already large enough, it stays and any changes are in the quote.

Do you survey before quoting?

Yes, always. We diagnose before we treat: the survey tells us what the job needs and how to do it and the fixed price is built on it.

Heat pumps in Millbrook: local notes

At about 1 mile from the coast, Millbrook is close enough for sea air to matter. Near the coast, we choose the outdoor unit position with salt-laden wind in mind.

If your home is listed, like Southampton Tudor House and Garden about 2.2 miles south-east, listed building consent comes before any heat pump work. Live in one of the older houses around Church of the Holy Trinity? Expect the survey to look closely at heat loss and at the building’s planning status.

Millbrook is about 2 miles west of Southampton, in Southampton. If you need air source heat pumps in Millbrook, it’s easy to get a fixed-price quote: please phone 07833 053749 or drop us a line. Our area covers London and the South East, including Millbrook. Millbrook is one of 40 towns, villages and districts in Southampton we cover. Guildford, roughly 44 miles off, has its own page on this site.

Postcode districts we cover here: SO15 and SO16. We cover homes and businesses on Mill Road, Mendip Road and Severn Road and the roads around them. Close to Millbrook, our area also takes in Regents Park (1 mile north-east), Shirley (1 mile north-east), Freemantle (1 mile east), Maybush (1 mile north) and Redbridge (1 mile west). Larger places within reach include Townhill Park (4 miles east), Midanbury (4 miles east), Thornhill (5 miles east) and Chartwell Green (4 miles east).

Near you in Millbrook

Typical jobs here are in properties near Millbrook Community School, Blacksmiths Arms and Regents Park Community College and the streets around them. Millbrook’s nearest station is Millbrook (Hants) station, about 0.8 miles south-east. Nearby you will also find Marlands Shopping Centre (2 miles east) and Western Community Hospital (0.7 miles north). For a walk, there’s Testwood Lakes.

Map of Millbrook © OpenStreetMap contributors

What a customer said

“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”

David W., Haywards Heath

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead