Greater London · Heat pump installation
Mill Meads air source heat pumps
Our engineers work in Mill Meads on MCS certified installation of air source heat pumps for heating and hot water, with the Boiler Upgrade Scheme grant applied for. A look at the job first, a fixed-price quote and written records at the end.
- Deciding which kind of heat pump suits the home
- Not knowing whether a grant applies
- Checking emitters for a heat pump
When it’s something else
An honest diagnosis matters more to us than a booking, so here’s what air source heat pumps won’t do:
- Insulation work, such as loft or cavity wall insulation
- Formal advice on VAT for your situation
- Getting planning permission or listed building consent on your behalf
Not sure which it is? You can phone 07833 053749, or email if that’s easier and we will tell you honestly.
Parts of the system we cover
- Homes heated by oil, LPG or gas
- Underfloor heating
- Radiator systems
- Air-to-water heat pumps
- Hot water cylinders
- Air-to-air heat pumps
Air source heat pumps in Mill Meads, done properly
An air-to-water heat pump heats water to a lower temperature than a typical boiler, so radiators may need to be larger to give out the same heat. The survey shows which rooms are fine and which need changes and anything that needs changing is in the quote. If you are dealing with checking whether planning permission is needed and moving away from fossil-fuel heating, we can help.
For flats in Mill Meads, the lease, the freeholder and the rules for flats all come into it. Permitted development limits are different for flats, and we check before designing.
The records are your system’s health record: a dated account of the work and the readings we took. It makes the next visit quicker and any warranty question simpler, so keep it safe.
- Location
- Mill Meads (E3, E15, E14)
- Wider area
- Greater London
- Typical price
- £8,000–£16,000 before the grant, 0% VAT on homes
- Pricing
- Fixed, in writing
- Accreditations
- NICEIC and F-Gas, MCS
- Telephone
- 07833 053749
- Checked
- 30 October 2026
How it works
Anything involving refrigerant is handled by F-Gas qualified engineers, as the law requires, and electrical work is done by us as NICEIC approved contractors. On the day, both are in the same hands. On site, it takes a few days on site, depending on the cylinder, the radiators and the pipework involved. For a job in Mill Meads, tell us about parking, permits and access to the building when you get in touch.
- It starts with a conversation about the home, the existing heating and your plans.
- A heat loss survey works out how much heat each room needs, and we look at the radiators, the cylinder space and where the outdoor unit could go.
- We send a fixed-price quote that shows the equipment, the grant position and the VAT.
- We fit the outdoor unit and connect it to the heating, hot water and controls.
- We commission the heat pump, complete the MCS paperwork and talk you through the controls.
How to prepare
- Have the make and model of any existing unit to hand
- Name a contact who can meet us at the agreed time
- Move furniture away from the wall where we will be working
Ask for a quote
If you need air source heat pumps in Mill Meads, phone us on 07833 053749. Let us know the type of property and what you need, and send a few pictures if you can. Enquiries get a reply the same working day.
Related advice
Common problems we fix in Mill Meads
Many enquiries start with a question about the Boiler Upgrade Scheme. Whether you can get the grant depends on your home and the scheme conditions and we confirm it before you go ahead.
These are the situations we see most often:
- No space for a hot water cylinder
- Finding a place for the outdoor unit
- Not knowing whether a grant applies
With Sutton House about 2.4 miles north-west, it’s worth asking whether your own home is listed before planning a heat pump.
What your quote should include
- Who does the electrical work, and whether they can certify it
- How VAT is shown, and which rate applies
- Which brand and model they’re proposing, and why
Different systems, different jobs
The Boiler Upgrade Scheme
Only one grant is available per property, and it can’t replace a low-carbon system, and hybrid systems are not eligible.
Outdoor unit position and planning
Where the outdoor unit goes depends on airflow, access and the route into the house. Noise is part of the MCS 020(a) check, so we consider nearby homes too.
Homes in Mill Meads and heat pumps
About 56% of homes across Mill Meads and its surrounding area have been built since 2000, according to the Valuation Office Agency’s council tax figures, and the last census (2021) found about 90% of households live in flats. Newer homes usually lose less heat, which tends to suit a heat pump well. For flats, the first questions are where an outdoor unit could go, whether a cylinder fits and what the lease allows. For a London home, the outdoor unit position and the MCS noise check need careful planning.
Older homes near St Mary's Church may need extra checks for planning and heat loss before a heat pump is designed.
Mill Meads is about 1 mile south of Stratford, in Greater London. Whatever kind of property you have in Mill Meads, our engineers can help with air source heat pumps. You will hear back from us the same working day and our emergency line runs 24/7. Count every place we list in Greater London and you reach 764, with Mill Meads on the list.
Not far from Mill Meads, a recent job of ours was on Greenwich High Road, Greenwich (SE10), about 3 miles south: installing a Mitsubishi Electric wall-mounted unit in the retail area and a second unit in the stockroom and office.
You’ll find streets such as Gay Road, Bruce Road and Edgar Road, all of which are in our area. Our working area takes in E3, E15 and E14. Close to Mill Meads, our area also takes in Three Mills (1 mile north), Bromley (1 mile south-west), Old Ford (1 mile north-west), Bow (1 mile west) and Bow Common (1 mile south-west). Further out, we also cover London (4 miles south-west), City of Westminster (6 miles west), Marylebone (6 miles west) and Kensington (9 miles west).
Around Mill Meads
We fit and service air conditioning in homes and premises around Bob's Park, Rose and Crown pub and Manorfield Primary School and the streets around them. The closest station to Mill Meads is West Ham station, about 0.5 miles east. Nearby you will also find Stratford Centre (1 mile north) and St Clement's Hospital (0.9 miles west). Open spaces near Mill Meads include Hollow Pond and Old Ford Island.
Nearby places to Mill Meads
More services for Mill Meads
Questions from Mill Meads
Do I need planning permission for a heat pump in Mill Meads?
There’s no single answer: the building and the outdoor unit position decide it. The centre of Mill Meads is in the Three Mills Conservation Area. The permitted development rules for heat pumps leave out listed buildings and stop outdoor units going on road-facing walls or roofs in conservation areas. Anything outside the rules needs an application, and we raise it with the local planning authority (for Mill Meads, normally Tower Hamlets council) first.
Do I need permission to put air conditioning in my flat in Mill Meads?
Often, yes, but the lease and the freeholder typically have a say. Permitted development rules for flats are tighter than for houses, so we check the outdoor unit position and give you the details to send to the freeholder or managing agent.
Do you work in Mill Meads?
Yes. Our engineers work in Mill Meads, as part of our area across London and the South East. Our base is in East Grinstead, West Sussex.
Is the equipment covered by a warranty?
The manufacturer provides it, on its own terms. Some brands make regular servicing a condition, so keep your service records.
Can you set up regular servicing?
Yes. We offer maintenance contracts, set at the interval the system and the manufacturer’s terms need. Every visit is recorded and F-Gas records kept where they apply.
Will skipping a service affect the warranty?
It can, for some brands. Read the manufacturer’s terms, or send us the make and model and we’ll explain them, and book the service at the interval they recommend.
Do you have a 24/7 line?
Yes. If something urgent happens, like water coming from a unit or a critical room overheating, call our 24/7 line and we’ll tell you what to do first.
From one of our customers
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager