Kent · Heat pump installation
Heat pump installation in Maypole, Kent
Air source heat pumps for Maypole, from F-Gas certified engineers, with the manufacturer’s warranty terms explained on your quote. Enquiries answered the same working day.
- Checking emitters for a heat pump
- Checking eligibility for a heat pump grant
- Choosing between air-to-water and air-to-air
Air source heat pumps for homes and businesses in Maypole
Heat pumps run at lower flow temperatures than most boilers, so radiators may need to be larger to give out the same heat. The survey shows which rooms are fine and which need changes, and the quote sets it out. Common call-outs are for questions about listed buildings or conservation areas and no space for a hot water cylinder, across hot water cylinders, underfloor heating and homes heated by oil, LPG or gas.
Homes around Maypole usually have room outside for a heat pump, so the design focuses on heat loss and radiators.
Looking after a system is mostly common sense: clear space around the outdoor unit, the cleaning the manual describes and a service at the recommended interval. It also keeps you on the right side of any warranty terms that ask for servicing.
- Where
- Maypole (CT3)
- Wider area
- Kent
- Price
- Fixed-price quote after a site survey
- Typical price
- £8,000–£16,000 before the grant, 0% VAT on homes
- Credentials
- F-Gas certified, NICEIC approved, MCS
- Phone
- 07833 053749
- Reviewed
- 30 October 2026
Signs you need air source heat pumps in Maypole
Extensions, renovations and loft conversions are a natural time to rethink the heating. Pipework, radiators and space for a cylinder are easier to plan while work is going on.
If any of these sounds familiar, it’s worth a diagnosis:
- A boiler that is getting old
- Deciding on the outdoor unit position
- Moving away from fossil-fuel heating
If your home is one of the older properties near Church of the Holy Cross, the survey checks whether it’s listed or in a conservation area before the outdoor unit position is chosen.
Comparing quotes
- Which VAT rate the quote uses, and why
- Whether extra work needs your approval first
- Whose warranty applies, and on what terms
The process
Every visit follows the same order: agree the plan on site, put the dust sheets down, do the work, test what we have done and explain it all to you. On site, the work takes a few days on site, depending on the cylinder, the radiators and the pipework involved. We plan the trip to Maypole around you.
- First we find out about the property, the heating you have now and what you’re hoping for.
- The survey measures heat loss room by room and looks at radiators, hot water and the best spot for the outdoor unit.
- We send a fixed-price quote that shows the equipment, the grant position and the VAT.
- Fitting day: the outdoor unit is placed, the indoor side connected and the controls set up.
- Once it’s running correctly, the MCS certificate is issued and we show you the settings.
How to prepare
- Arrange for someone to be there to let us in
- Have the make and model of any existing unit to hand
- Give us access to the outside wall, roof or yard where the outdoor unit sits
Ask for a quote
If you need air source heat pumps in Maypole, phone 07833 053749 or write to us at info@aircondoctor.co.uk. Let us know the type of property and what you need, plus some pictures if they’re to hand. Enquiries get a reply the same working day.
Advice
Pricing air source heat pumps in Maypole
Some jobs are bigger than they look, and some smaller. The main factors:
- How many units are involved
- A single visit or a regular plan
- What state the existing equipment is in
The cost depends on the system and the number of rooms or units, the access and what the work involves. We give you a fixed price before we start, so there are no surprises.
Helping us quote
The more you tell us, the more accurate the quote. When you get in touch, it helps to send:
- Photos showing the indoor unit and the space around it
- The outdoor side of the property, including any roof or flat area
- The postcode and whether it’s a home, flat or business
Published ranges are a starting point; the quote is built on your property, because every property is different. Once we have looked at the job, from photos or on a survey, you get a fixed price. To start, call 07833 053749.
What a heat pump looks like in Maypole
Maypole lies within about 3 miles of the sea. Salt air is hard on outdoor units, so a heat pump near the sea needs a sensible position and regular checks, and some models offer corrosion protection for coastal sites. Census 2021 figures found about 78% of households in detached or semi-detached houses. Detached and semi-detached houses typically have room for the outdoor unit and a cylinder.
Every heat pump design starts with a room-by-room heat loss calculation.
Maypole is about 2 miles south-east of Herne Bay, in Kent. Whether you’re in the middle of Maypole or further out, our engineers cover air source heat pumps, from small jobs to large ones. We cover 922 places across Kent, large and small. Our Bromley page covers places nearby, about 50 miles away.
Maypole Lane and Maypole Road and the roads off them are all inside our area. Here we cover the CT3 postcode area. If you are just outside Maypole, we cover Old Tree (1 mile east), Millbank (1 mile north), Hoath (1 mile south), Knave's Ash (1 mile south-west) and Highstead (1 mile north-east). Within a short drive, we also cover Canterbury (5 miles south-west), Margate (10 miles east), Dover (15 miles south-east) and Ramsgate (11 miles east).
Local landmarks in Maypole
We fit and service air conditioning in homes and premises around Spires Academy and Curtis Wood. For rail, the closest station is Herne Bay station, about 2.6 miles north-west. Well-known places in the area include St Martins Hospital (4.9 miles south-west). Not far away are West Blean and Thornden Woods.
Honest limits
Before booking, it helps to know what’s not included:
- Getting planning permission or listed building consent on your behalf
- Formal advice on VAT for your situation
- Promising eligibility for the Boiler Upgrade Scheme
Not sure which it is? You can call 07833 053749 or email us and we’ll tell you honestly.
Where we work
- Air-to-air heat pumps
- Underfloor heating
- Radiator systems
- Homes heated by oil, LPG or gas
- Hot water cylinders
- Air-to-water heat pumps
Maypole questions
Will you come out to Maypole?
We do. Villages and hamlets get the same service as the bigger towns. We’re based in East Grinstead and plan each visit so the job can be finished in one trip where possible.
Do I need planning permission for a heat pump in Maypole?
That depends on the building and where the outdoor unit goes. The centre of Maypole is in the Ford, Maypole and Oldtree Conservation Area. On a house, an air source heat pump can often go ahead under permitted development, with an outdoor unit of no more than 1.5 cubic metres and an installation that meets MCS 020(a), which includes a noise check. Those rights don’t reach the grounds of a listed building, and conservation areas rule out walls or roofs facing a road. If that might affect you, we ask Canterbury City council, which is usually the planning authority for Maypole.
Can I get the Boiler Upgrade Scheme grant?
Quite possibly. In England and Wales it pays £7,500 for an eligible air-to-water or ground source heat pump, and £2,500 for air-to-air under tighter rules. Homes heated by oil or LPG with no mains gas can get an extra £1,500 towards an air source or ground source heat pump until March 2027. We check your home against the rules at the survey.
What does an air-to-water heat pump cost?
Air-to-water work is in the £8,000–£16,000 range (0% VAT on homes), with any grant still to come off. The heat pump size, radiator changes and the cylinder decide where in that range you are. Air-to-air is priced after a survey.
Is there a survey before the work?
Yes. Every job is looked at first, either on a site survey or from photos and details for simple jobs. Then you get a fixed-price quote.
How much time does a heat pump install need?
As a guide, it takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. We plan the work so you’re without heating for as little time as possible, and we explain it in advance.
How do you keep the place clean during the work?
Protection goes down first: sheets over the floor and nearby furniture. Any drilling is agreed with you first, and we clear up the dust and offcuts before we leave.
Also near Maypole
Also in Maypole
From one of our customers
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead