Kent · Heat pump installation
Lympne air source heat pumps
Air source heat pumps in Lympne from an F-Gas certified company, with the manufacturer’s warranty terms explained on your quote. Enquiries answered the same working day.
- Moving away from fossil-fuel heating
- Not knowing whether a grant applies
- A boiler that’s getting old
Air source heat pumps around Lympne
Lympne is within about 2 miles of the coast. Coastal sites are worth mentioning at the survey, as salt air affects the outdoor unit and its fixings. About 40% of homes in and around Lympne date from 1945 to 1972, according to Valuation Office Agency council tax records, and about 88% of households live in detached or semi-detached houses, according to the 2021 Census. Whether the walls and loft have been insulated makes a real difference to the heat pump size for homes of that period. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these. Roughly a third of a mile or less from central Lympne, you reach the Lympne Conservation Area. Listed buildings are part of the picture here: about 11 within half a mile of the centre, such as Church of St Stephen (grade I). For a heat pump, permitted development doesn’t apply within the grounds of a listed building, and in a conservation area the outdoor unit can’t go on a wall or roof facing a road, so we check with the local planning authority (usually Folkestone and Hythe council) where necessary.
Live in one of the older houses around Church of St Stephen? Expect the survey to look closely at heat loss and at the building’s planning status. If your home is listed, like Westenhanger Castle about 1.3 miles north, listed building consent comes before any heat pump work.
Lympne is about 2 miles west of Hythe, in Kent. From the centre of Lympne to the outskirts, our engineers cover air source heat pumps, from small jobs to large ones. Our Kent coverage runs to 922 places, Lympne among them. Eastbourne, roughly 38 miles off, has its own page on this site.
Postcode districts we cover here: CT21. The Street, Harman Avenue and Tourney Close and the roads off them are all inside our area. If you are just outside Lympne, we cover Berwick (1 mile north-east), West Hythe (1 mile south-east), Newingreen (1 mile north-east), Westenhanger (1 mile north-east) and Pedlinge (1 mile east). Within a short drive, we also cover Ashford (8 miles north-west), Canterbury (14 miles north), Dover (13 miles east) and Folkestone (6 miles east).
Around Lympne
Locally, jobs take us to houses, flats and workplaces close to The Royal Oak Public House, Sandling Park and Brockhill Park Performing Arts College and the streets around them. Lympne’s nearest station is Westenhanger station, about 1.4 miles north-east of the centre. Well-known places in the area include Lympne Castle (within half a mile south) and Hythe Museum (2.6 miles east). The countryside around Lympne includes Tolsford Hill.
Air source heat pumps in Lympne, done properly
Hot water from an air-to-water system is stored in a cylinder. Homes with a combi boiler may not have a cylinder, so finding space for one is part of the survey. With air-to-air, hot water has to come from something else. The work covers hot water cylinders, underfloor heating and air-to-air heat pumps, and people most often call us about deciding on the outdoor unit position and checking emitters for a heat pump.
Space for an outdoor unit is rarely an issue near Lympne, so the design comes down to heat loss, radiators and hot water.
Each manufacturer sets its own warranty period. Daikin, for example, gives a standard 2 years on split air conditioning, with longer extensions only on its air-to-water heat pumps. For any other brand, we explain the manufacturer’s terms on your quote.
- Location
- Lympne (CT21)
- Region
- Kent
- Enquiries
- On the working day you ask
- Costs
- £8,000–£16,000 before the grant, 0% VAT on homes
- Quote
- Fixed, in writing
- Credentials
- F-Gas certified company, NICEIC approved, MCS
- Phone
- 07833 053749
- Page updated
- 30 October 2026
Different systems, different jobs
Air-to-water heat pumps
An air-to-water heat pump heats water for your radiators or underfloor heating and your hot water cylinder. It replaces the boiler as the main heat source, and is MCS certified when we install it.
The Boiler Upgrade Scheme
Not every home qualifies and we confirm it before anything is agreed.
Why deal with it now?
A sudden boiler failure rarely leaves room to plan a heat pump properly. Planning ahead gives time for the heat loss survey, the design and the grant application while the old heating still works. An early booking makes the visit to Lympne easier to arrange.
Typical ranges are on our prices page, but each job is priced on what it involves. Call for a fixed-price quote, and we’ll talk you through it.
Why book with us
- One contact for properties across the South East and London
- F-Gas company certification
- We diagnose before we treat
- MCS certified heat pump installers
See how installs are priced and our accreditations and certificates.
Towns and villages near Lympne
What else we do in Lympne
Safe owner checks
Some faults have simple causes you can check first: check the mode, the set temperature, the remote’s batteries and the breaker. If a breaker trips again after you reset it, leave it off and phone us on 07833 053749 or send an email.
For air conditioning, cleaning the indoor unit’s filters is the main job owners can do, if the manual says so. They come out, get a gentle clean and go back only when they’re dry. On a heat pump, the equivalent is keeping the outdoor unit clear and checking the controls.
How it works
The visit goes in the diary at a time that works for you, and we keep you posted if anything changes. On arrival, the engineer compares the job with the survey, your pictures or the details you gave us. Anything unexpected is raised with you before we go further. After that, it takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. Photos of the room and the outside of the property help us plan a visit to Lympne.
- It begins with your house and the heating it relies on now.
- A heat loss survey is carried out, room by room.
- The design covers the heat pump, emitters, hot water and outdoor unit.
- A fixed-price quote explains the cost, the grant position and the VAT.
- We install, commission and register the system under MCS.
Preparing for the visit
- Find the manual or the paperwork for the system, if you have it
- Mention any parking restrictions near the property
- Make sure we can reach the consumer unit or fuse board
How to get a quote
Want a quote for air source heat pumps? Please phone us on 07833 053749 with a few details about the property. We will explain what we’d recommend and why, then send a fixed-price quote before you commit to anything.
Related advice
Lympne questions
Is the coast a problem for outdoor units in Lympne?
It can. Lympne is within about 2 miles of the coast, and salt air speeds up corrosion on outdoor units. We site outdoor units out of the worst of the sea wind where possible and can suggest models with corrosion protection where the manufacturer offers it.
Do you cover smaller places like Lympne?
Yes. Lympne is within the area we cover across London and the South East. Visits to smaller places are planned so the engineer arrives with what the job needs.
Can I get a grant for an air-to-air heat pump?
The air-to-air grant is £2,500, and only some homes qualify. The system has to replace the fossil-fuel heating and heat the whole home with an MCS certified installer.
Do I need planning permission for a heat pump?
Many installations on houses in England fall under permitted development, subject to the rules. Listed buildings and their curtilages are excluded, and listed building consent is a separate matter. We check what applies to you.
Will you work on another installer’s system?
Yes. We look at it first and tell you what we find, including anything about the original installation that needs putting right. Any work is priced before it goes ahead.
How do you keep the place clean during the work?
Protection goes down first: sheets over the floor and nearby furniture. Holes and fixings are agreed with you, and we clean up afterwards when we finish.
What does F-Gas certified mean?
F-Gas certification shows a company is approved to work on equipment containing fluorinated gases, such as the refrigerant in air conditioning and heat pumps. That isn’t optional: it’s required by law, and we hold it.
What a customer said
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead