Kent · Heat pump installation
Heat pump installation in West Hythe, Kent
F-Gas certified and NICEIC approved, we cover West Hythe for heat pump installation. Fixed-price quotes and a 24/7 emergency line.
- Deciding which kind of heat pump suits the home
- A boiler that is getting old
- Checking emitters for a heat pump
Honest limits
It’s worth knowing the limits before booking:
- Insulation work, such as loft or cavity wall insulation
- Disconnecting or servicing a gas boiler
- Tax advice on your own circumstances
Not sure which it is? You can call 07833 053749 or use the quote form and we will tell you honestly before booking.
Where we work
- Hot water cylinders
- Homes heated by oil, LPG or gas
- Underfloor heating
- Air-to-air heat pumps
- Radiator systems
- Air-to-water heat pumps
How we handle air source heat pumps in West Hythe
A £2,500 grant is available for some air-to-air heat pumps, with conditions. The system must replace the existing fossil-fuel heating and meet the home’s full heating demand, it must be installed by an MCS certified installer, and it must be in a home; adding it alongside a boiler doesn’t qualify. If you’re dealing with questions about where the outdoor unit can go and moving away from fossil-fuel heating, we can help.
In a place like West Hythe, some homes are listed, and permitted development doesn’t cover listed buildings, so we check consent first.
Think of the paperwork as the system’s health record: a dated account of the work and the readings we took. It makes the next visit quicker and any warranty question simpler and it’s worth keeping safe.
- Place
- West Hythe (CT21)
- Wider area
- Kent
- Typical price
- £8,000–£16,000 (0% VAT on homes), before the grant
- Accreditations
- F-Gas certified company, NICEIC approved, MCS
- Enquiries
- We reply the same working day
- Pricing
- A fixed price before work begins
- Call
- 07833 053749
- Last updated
- 30 October 2026
Places near West Hythe
More services for West Hythe
Pricing air source heat pumps in West Hythe
Typical ranges are on our prices page, but every job is priced on its own. What we look at:
- Which make and model is being fitted or worked on
- Whether it’s a simple split or a larger system
- Whether it’s a one-off job or part of a maintenance contract
No two properties are the same, so we price each one individually. The equipment, how we reach it, the route between units and the work needed all play a part.
Helping us quote
To speed up the quote, send us:
- The make and model of the system, from the label
- Any error code or flashing light on the display
- Photos showing the indoor unit and the space around it
If you need air source heat pumps in West Hythe, give us a ring on 07833 053749 or write to us at info@aircondoctor.co.uk. Tell us what kind of property it is and what you’d like done, plus some pictures if they’re to hand. Enquiries get a reply the same working day.
West Hythe questions
Does being near the sea make a difference to air source heat pumps in West Hythe?
It can, as West Hythe is within about 2 miles of the sea, where salt in the air is hard on coils and fixings. The outdoor unit position, its fixings and regular servicing all help near the sea.
Does the Boiler Upgrade Scheme cover homes in West Hythe?
West Hythe is in England, where the Boiler Upgrade Scheme runs. The grant is £7,500 for an air source (air-to-water) heat pump and £2,500 for an air-to-air system that replaces the existing fossil-fuel heating. We hold MCS certification, so the application is ours to make for you.
Can you set up regular servicing?
Yes. Maintenance contracts are part of what we do, set at the interval the system and the manufacturer’s terms need. Each visit is recorded, with F-Gas records where refrigerant work is involved.
How long will it take to install a heat pump?
An installation takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. The survey lets us set a firm programme, so ring us on 07833 053749 or drop us a line to arrange one.
Will I get records for the system?
Yes. Every visit is written up, and any work on the refrigerant circuit goes in the F-Gas records. Keep them with the manual and the warranty documents.
Do I need new radiators for a heat pump?
It varies from room to room. We check them all during the survey and the quote shows what’s needed.
Is a heat pump permitted development?
Under the Planning Portal rules, a heat pump on a house can often be permitted development. Listed buildings are excluded, and listed building consent is separate. We check what applies to you.
What a heat pump looks like in West Hythe
West Hythe lies within about 2 miles of the sea. For a heat pump near the sea, ask about any coastal protection option the manufacturer offers. The Valuation Office Agency’s council tax figures date about 40% of homes across West Hythe and its surrounding area to the post-war years, 1945 to 1972, and Census 2021 figures found about 88% of households in detached or semi-detached houses. For homes of that age, the survey checks the insulation, the radiators and the hot water setup. Houses typically have space for an outdoor unit and a hot water cylinder. Listed buildings are part of the picture here: about 9 within half a mile of the centre, such as Church of St Stephen (grade I). That affects heat pumps: listed buildings need consent, and conservation areas limit where the outdoor unit can go under permitted development. Where necessary, we check with Folkestone and Hythe council, normally the planning authority here.
If your home is one of the older properties near Church of St Stephen, the survey checks whether it’s listed or in a conservation area before the outdoor unit position is chosen. With Westenhanger Castle about 1.8 miles north, it’s worth asking whether your own home is listed before planning a heat pump.
West Hythe is about 2 miles west of Hythe, in Kent. We cover West Hythe for air source heat pumps and across the rest of Kent. West Hythe is one of 922 places in Kent where we work for homes and businesses. The nearest of our city pages is Eastbourne, around 38 miles from West Hythe.
All of CT21 is covered, from the main roads to the quietest streets. From Royal Military Road, St Mary's Road and West Hythe Road to the smaller roads in between, the whole area is covered. Close by, we work in Lympne (1 mile north-west), Palmarsh (1 mile south-east), Berwick (1 mile north), Pedlinge (1 mile north-east) and Newingreen (1 mile north). Larger places within reach include Ashford (9 miles north-west), Canterbury (15 miles north), Dover (13 miles north-east) and Folkestone (6 miles east).
Landmarks near West Hythe
We fit and service air conditioning in homes and premises around Brockhill Park Performing Arts College, Sandling Park and Botolphs Bridge Inn, among other places. The nearest railway station is Westenhanger station, roughly 1.9 miles north of the centre. Nearby you’ll also find Lympne Castle (within half a mile north-west) and Hythe Museum (2.2 miles east). Green spaces nearby include Tolsford Hill.
How the visit works
We keep the work area tidy as we go, with dust sheets down and offcuts and packaging cleared up. If we need to drill through a wall, we agree the spot with you first. On site, it takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. For a village like West Hythe, tell us about narrow lanes, gates and parking when you book.
- First we find out about the property, the heating you have now and what you’re hoping for.
- We survey the home room by room for heat loss, and check the emitters, hot water and outdoor unit position.
- The price comes back fixed and in writing, with the grant and VAT shown line by line.
- Fitting day: the outdoor unit is placed, the indoor side connected and the controls set up.
- Commissioning, MCS certification and a handover of the controls finish the job.
How to prepare
- Mention any parking restrictions near the property
- Have the make and model of any existing unit to hand
- Let us know if the building has a permit or sign-in process
Getting a quote
Photos are the fastest route to a quote: the inside and outside of the property where the work is, plus the rating plate of any unit already there. Tell us the address and what you need, and many jobs can be priced from that.
Advice
For landlords and property managers
Bigger systems bring extra duties: a TM44 inspection by an accredited energy assessor is required at least every 5 years for systems over 12 kW. We arrange the inspection, get the system ready and put right anything it picks up.
We work for landlords, letting agents and managing agents as well as homeowners and businesses. Let us know who will give us access and who the records should go to, and we will keep everyone informed.
What a customer said
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath