Hampshire · Heat pump installation
Heat pump installation in Hyde, Hampshire
Air source heat pumps for Hyde and the surrounding area: diagnosis first, then a fixed-price quote, the work and written records. Ask us for a fixed-price quote.
- Moving away from fossil-fuel heating
- Deciding on the outdoor unit position
- Checking eligibility for a heat pump grant
Air source heat pumps for homes and businesses in Hyde
Heat pumps run at lower flow temperatures than most boilers which means some radiators may need upsizing. We check each radiator against the room’s heat loss, and the quote sets it out. Common call-outs are for plans to switch to electric heating with a heat pump and checking emitters for a heat pump, on homes heated by oil, LPG or gas, air-to-water heat pumps and hot water cylinders.
Cottages and older homes near Hyde can lose heat faster, which a heat loss calculation will show. Sometimes insulation first is the better investment.
The records are your system’s health record: a dated account of the work and the readings we took. It makes the next visit quicker and any warranty question simpler, so keep it safe.
- Where
- Hyde (SO23, SO22, SO20)
- Wider area
- Hampshire
- Prices
- £8,000–£16,000 before the grant, 0% VAT on homes
- Accreditations
- NICEIC and F-Gas, MCS
- Price
- Fixed-price quote after a site survey
- Telephone
- 07833 053749
- Last updated
- 30 October 2026
Before you call an engineer
Keep a note of anything odd: an error code, a new noise, a drip, a smell or a change in how well the system heats or cools. It makes our diagnosis quicker, and a photo of the display helps even more.
Do not move, re-route or disconnect units or pipework yourself. Disconnecting a system means dealing with refrigerant, which only a qualified engineer can do, and the electrical side needs a competent person. If you need something moved, we can quote for it.
Your questions about air source heat pumps in Hyde
Will you come out to Hyde?
Yes. Hyde is within the area we cover across London and the South East. We’re based in East Grinstead and plan each visit so the job can be finished in one trip where possible.
Is the heat pump grant available in Hyde?
Hyde is covered, as the scheme runs across England and Wales. Whether your home qualifies, and for how much, depends on the type of heat pump and the heating it replaces. We hold MCS certification, so the application is ours to make for you.
Are you F-Gas certified?
F-Gas company certification, NICEIC approval for electrical work and MCS certification for heat pumps, plus Checkatrade membership. Engineers who handle refrigerant hold their own F-gas qualifications as well.
Is there a survey before the work?
Yes. Photos often do the job for simple work, while bigger systems and repairs that need testing get a visit.
How does the warranty work?
The manufacturer provides it, on its own terms. Some brands make regular servicing a condition, so keep your service records.
Will my radiators work with a heat pump?
The heat loss survey answers that, room by room. Where a radiator is already large enough, it stays, and any that need upsizing are set out in the quote.
How soon will you get back to me?
We reply to enquiries the same working day. If it’s an emergency, ring the 24/7 line instead.
What affects the cost of air source heat pumps
Your quote is based on your property. We take into account:
- What kind of system it is
- What electrical work the job needs
- The pipe route between the units
Putting several jobs into one visit often makes better use of the time. Tell us about everything you’d like looked at, and you’ll get one fixed price.
Asking for a quote
When you call or email, it’s useful to have:
- The outside wall, roof or yard where the outdoor unit sits or would go
- A short video of any fault, such as a noise or a flashing light
- Photos showing the indoor unit and the space around it
Every quote starts with a look at the job, either on a site survey or, for simple jobs, from your pictures and details. After that, we send a fixed price before any work starts.
What a heat pump looks like in Hyde
At about 60 miles from central London, Hyde sits inside the area we cover across London and the South East. The middle of Hyde is part of the Winchester Conservation Area. Historic England lists about 130 buildings and structures within half a mile of the centre of Hyde, including Avebury House (grade I). So the heat pump survey asks two extra questions here: is the home listed, and is it inside a conservation area?
If your home is near Winchester station and heated by a gas boiler, an air-to-water heat pump can replace it where the survey shows it suits. Older homes near St Bartholomew's Church may need extra checks for planning and heat loss before a heat pump is designed.
Hyde is about 1 mile north of Winchester, in Hampshire. Anywhere in SO23, our engineers can take on air source heat pumps. Across Hampshire, we cover 683 places, and Hyde is one of them. Guildford is in our area too, around 34 miles away.
From Elm Road, Swan Lane and City Road to the smaller roads in between, nowhere is left out. All of SO23, SO22 and SO20 is within our area, from busy streets to back roads. Close to Hyde, our area also takes in Abbotts Barton (1 mile north-east), Winchester (1 mile south), Weeke (1 mile west), Highcliffe (1 mile south-east) and Bar End (1 mile south). Within a short drive, we also cover Eastleigh (7 miles south), Andover (12 miles north-west), Totton (13 miles south-west) and Chandler's Ford (7 miles south-west).
What’s near Hyde
Locally, jobs take us to houses, flats and workplaces close to Peter Symonds College, Leigh House Hospital and The King Alfred pub, among other places. There’s a railway station in Hyde itself: Winchester station. A little further out are Winchester Castle (0.6 miles south-west) and Royal Observer Corps Museum (0.5 miles north). Green spaces nearby include Winnall Moors and Twyford Down.
What we do, step by step
We book the visit for a day and time that suit you, and we let you know if plans need to move. When we arrive, we check the job against the survey or the pictures you sent. If something is different, we talk it through with you before carrying on. From there, the work takes a few days for most air-to-water installations, with air-to-air systems often quicker. In a place like Hyde, parking is rarely an issue, but tell us about gates and access to the back of the property.
- You tell us about the home and what you want from a heat pump.
- We survey for heat loss and look at radiators, cylinder space and outdoor unit options.
- We recommend air-to-water or air-to-air and check the grant position.
- We install the heat pump and connect it up.
- After commissioning, you get the MCS certificate and a handover.
Preparing for the visit
- Tell us about access, such as roof hatches, high walls or locked plant areas
- Mention any managing agent or landlord rules we need to follow
- Plan for pets to be kept clear during the visit
Get a fixed-price quote
Photos are enough for some jobs; others need a visit first. Bigger systems, commercial sites and awkward pipe routes are normally surveyed on site. Either way, the quote is fixed before anything goes ahead.
Read more
System by system
Air-to-air heat pumps
A £2,500 Boiler Upgrade Scheme grant is available for air-to-air only if it replaces the fossil-fuel heating and meets the full heating demand. It must be installed by an MCS certified installer and be in a home.
Heat loss surveys
The survey covers the building fabric and how air moves through it along with the room sizes.
Nearby places to Hyde
More services for Hyde
A customer’s words
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead