Greater London · Heat pump installation

Air Source Heat Pumps in Hampton Hill

Air source heat pumps for Hampton Hill and the surrounding area: a survey or diagnosis, a fixed price, careful work and proper paperwork. Call for a fixed-price quote.

  • Working out whether radiators need upsizing
  • No space for a hot water cylinder
  • Finding a place for the outdoor unit

Air source heat pumps in Hampton Hill and nearby

About our air source heat pumps in Hampton Hill

We install air source heat pumps in Hampton Hill and across Greater London, and we’re MCS certified. Air-to-water systems feed your radiators or underfloor heating and hot water cylinder, while air-to-air systems heat rooms directly through indoor units and can cool them too. We help you work out which suits your home. Typical jobs include working out whether radiators need upsizing and choosing between air-to-water and air-to-air, on underfloor heating, air-to-water heat pumps and homes heated by oil, LPG or gas.

In a flat in Hampton Hill, the lease and the freeholder normally decide where a heat pump can go. The planning rules for flats are stricter than for houses, so we check the position before we design.

Any work on the refrigerant circuit is recorded: the work carried out, the refrigerant involved and the quantities. File them with the system’s paperwork, ready for the next service or a warranty query.

Where
Hampton Hill (TW12, TW11, TW2)
Region
Greater London
Price guide
Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
Quote
Fixed-price quote after a site survey
Certified
F-Gas certified company, NICEIC approved, MCS
Call
07833 053749
Page updated
30 October 2026

Questions from Hampton Hill

Does the Boiler Upgrade Scheme cover homes in Hampton Hill?

Hampton Hill is covered, as the scheme runs across England and Wales. Whether your home qualifies, and for how much, depends on the type of heat pump and the heating it replaces. As an MCS certified installer, we apply for it on your behalf.

Do I need planning permission for a heat pump in Hampton Hill?

That depends on the building and where the outdoor unit goes. The High Street Hampton Hill Conservation Area is close to the centre of Hampton Hill. On a house, an air source heat pump can often go ahead under permitted development, with an outdoor unit of no more than 1.5 cubic metres and an installation that meets MCS 020(a), which includes a noise check. Those rights don’t reach the grounds of a listed building, and conservation areas rule out walls or roofs facing a road. If that might affect you, we ask the local planning authority (for Hampton Hill, usually Richmond-Upon-Thames council).

Whose job is it to check the system for leaks?

Responsibility is shared between the operator, normally whoever owns or controls the equipment, and the service technicians. The interval depends on the refrigerant charge, measured in tonnes of CO2 equivalent: at least yearly for 5 to under 50 tCO2e, and every 6 months for 50 to under 500 tCO2e.

Will you make a mess?

We start with protection: dust sheets over floors and anything close to the work. Any drilling is agreed with you first, and we clear up the dust and offcuts when we finish.

Can I do the refrigerant work myself?

No, not the refrigerant side. The F-gas rules require certified companies and qualified engineers for it, and a new circuit is notifiable under Part P unless a registered electrician, such as a NICEIC approved contractor, does it.

How long does a heat pump installation take?

It takes from a couple of days to around a week, depending on the system and how much of the heating changes. How much of the heating changes decides most of the time and the timing is set out with your quote.

Which manufacturers do you install and repair?

We work with the leading brands, from Mitsubishi Electric, Daikin and Fujitsu to Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. Send us the make and model if you have it.

Pricing air source heat pumps in Hampton Hill

You’ll get a fixed price before any work starts. It takes into account:

  • What kind of system it is
  • The pipe route between the units
  • What electrical work the job needs

Typical ranges are on our prices page, but each job is priced on what it involves. Call for a fixed-price quote, and we will explain what it covers.

Before you get in touch

When you call or email, these details help:

  • The outside wall, roof or yard where the outdoor unit sits or would go
  • Any error code or flashing light on the display
  • The rating plate or label on any existing unit

To help us quote: where the property is and what kind of building it is, photos of the rooms or units, the brand and model of anything already fitted and any symptoms, from error codes to drips. Then phone 07833 053749 or use the quote form.

Heat pumps in Hampton Hill: local notes

VOA council tax data put about 41% of homes in Hampton Hill and the neighbourhoods around it before 1919. In older homes, the heat loss calculation is especially important, as solid walls and draughts change the size of heat pump needed. For a London home, the outdoor unit position and the MCS noise check need careful planning.

Live in one of the older houses around Hampton Hill United Reformed Church? Expect the survey to look closely at heat loss and at the building’s planning status. If your home is near Fulwell station and heated by a gas boiler, an air-to-water heat pump can replace it where the survey shows it suits.

Hampton Hill is about 2 miles south-west of Twickenham, in Greater London. Across the TW12 area, we can help with air source heat pumps. Count every place we list in Greater London and you reach 764, with Hampton Hill on the list. The nearest of our city pages is London, around 12 miles from Hampton Hill.

The closest recent job we can point to from Hampton Hill was on King Street, Twickenham (TW1), about 2 miles north-east: installing a Samsung VRF system serving the restaurant dining area, bar, private dining room and kitchen extraction area: seven indoor units in total.

Whether you are on Mays Road, Park Road and Holly Road or a nearby road, we can help. We cover every part of TW12, TW11 and TW2 and the streets around it. Neighbouring places we cover include Fulwell (1 mile north-east), Hampton (1 mile west), Teddington (1 mile east), Hanworth (1 mile west) and Strawberry Hill (1 mile north-east). Within a short drive, we also cover London (12 miles north-east), City of Westminster (11 miles north-east), Marylebone (11 miles north-east) and Kensington (8 miles north-east).

Local landmarks in Hampton Hill

In Hampton Hill, that means homes and buildings near Lady Eleanor Holles School, Park Hotel and Carlisle Park and the streets around them. Hampton Hill’s nearest station is Fulwell station, roughly 0.6 miles north-east of the centre. A little further out are Bentall Centre (2.4 miles south-east) and Metropolitan Traffic Police Museum (0.9 miles south-west). For a walk, there’s Richmond Hill and Kew Gardens Lake.

Map of Hampton Hill © OpenStreetMap contributors

What we do, step by step

The visit has three parts, a bit like a doctor’s appointment: look, put right and sign off. First comes a careful look at the system or the space, then the work itself, and finally we test, record and explain. The middle part takes longest, and that takes from a couple of days to around a week, depending on the system and how much of the heating changes. In a London area like Hampton Hill, parking and access are worth sorting out before the day.

  1. You tell us about the home and what you want from a heat pump.
  2. A survey covers heat loss, radiators, hot water and where the outdoor unit could sit.
  3. You get our view on the right type for the house, and on whether the Boiler Upgrade Scheme applies.
  4. The system is installed and connected to the controls.
  5. After commissioning, you get the MCS certificate and a handover.

Before we arrive

  • Name a contact who can meet us at the agreed time
  • Tell us about any building rules, permits or sign-in
  • Keep pets out of the rooms we are working in

Getting a quote

Want a quote for air source heat pumps? Please give us a ring on 07833 053749 or write to us at info@aircondoctor.co.uk and tell us about the job. We’ll talk you through the options and give you a fixed-price quote before anything is booked.

Get a quick quote

Related advice

Owner checks or an engineer?

Keep a note of anything odd: an error code, a new noise, a drip, a smell or a change in how well the system heats or cools. It makes our diagnosis quicker, and a photo of the display helps even more.

For air conditioning, cleaning the indoor unit’s filters is the main job owners can do, if the manual says so. With the power off, they lift out, can be vacuumed or rinsed and must be fully dry before they go back. On a heat pump, the equivalent is keeping the outdoor unit clear and checking the controls.

Landlords, agents and facilities managers

We work for landlords, letting agents and managing agents as well as homeowners and businesses. Let us know who will give us access and who the records should go to and we’ll copy in whoever needs it.

When the building owner and the occupier are different, it’s worth checking the agreement for who looks after the system. We can quote either party and send the records to whoever needs them.

A customer’s words

“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”

James T., Crawley, office manager

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead