Greater London · Heat pump installation
Heat pump installers in Edmonton
Looking for air source heat pumps in Edmonton? We diagnose first, fix the price and book the work around you, then sign it off with written records.
- Comparing heat pump types
- Replacing a combi boiler with a heat pump
- Ageing boilers that will need replacing
Air source heat pumps in Edmonton, done properly
We begin with a room-by-room heat loss survey. That tells us how much heat the home needs, room by room, so the heat pump and the radiators or indoor units can be sized properly. Guesswork leads to systems that are too big or too small. If the problem is questions about the Boiler Upgrade Scheme and replacing a combi boiler with a heat pump, we can sort it out.
In a London area like Edmonton, many homes are flats or terraces with little outside space, which affects which heat pump suits. An air-to-water system needs space outside and typically a hot water cylinder inside, while air-to-air units take less room.
Looking after a system is mostly common sense: keep the outdoor unit clear, follow the manufacturer’s guidance on cleaning and book a service at the interval they recommend. That also helps where the warranty terms ask for regular servicing.
- Location
- Edmonton (N9, N18, N13, EN1)
- Region
- Greater London
- Quotes
- Fixed-price quote after a site survey
- Enquiries
- Answered the same working day
- Typical price
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Certified
- F-Gas certified, NICEIC approved, MCS
- Phone
- 07833 053749
- Reviewed
- 30 October 2026
Let and managed properties
Where a tenant occupies the property but the landlord owns the system, the lease or tenancy agreement normally sets out who maintains what. We can quote either party and send the records to whoever needs them.
The F-gas rules share responsibility for leak checking between the equipment’s operator and the service technicians. In a let or managed building, it’s worth agreeing who that operator is and we’re happy to deal with whoever it is.
Towns and villages near Edmonton
What else we do in Edmonton
Air source heat pumps around Edmonton
For a London home, the outdoor unit position and the MCS noise check need careful planning.
If your home is one of the older properties near All Saints' Church, the survey checks whether it’s listed or in a conservation area before the outdoor unit position is chosen. Bruce Castle, roughly 1.8 miles south, is a reminder to check your home’s listing status: permitted development does not cover listed buildings.
Edmonton is about 9 miles north-east of City of Westminster, in Greater London. Properties in Edmonton get the same service as everywhere we cover: a look at the job first, a fixed-price quote and written records at the end. Across Greater London, we cover 764 places, and Edmonton is one of them. London, roughly 9 miles off, has its own page on this site.
Our nearest recent job to Edmonton was on Greenwich High Road, Greenwich (SE10), about 10 miles south: installing a Mitsubishi Electric wall-mounted unit in the retail area and a second unit in the stockroom and office.
The Broadway, Plevna Road and Galahad Road and the roads off them are all inside our area. Edmonton sits on or near the B137 and B154, which makes travel easy. Close to Edmonton, our area also takes in Upper Edmonton (1 mile south), Picketts Lock (1 mile east), Northumberland Park (1 mile south), Ponders End (1 mile north-east) and Bush Hill Park (1 mile north-west). Larger places within reach include London (9 miles south), City of Westminster (9 miles south-west), Marylebone (8 miles south-west) and Kensington (10 miles south-west).
Near you in Edmonton
Around Edmonton, our work takes us to homes and businesses near NiW Furniture pub, The Latymer School and Starks Field School. Edmonton has its own railway station: Edmonton Green station. Well-known places in the area include Edmonton Green Shopping Centre (under half a mile north-east) and North Middlesex University Hospital (1 mile south-west). For a walk, there’s Highams Park Lake and Ainslie Wood.
What we do, step by step
Our engineers arrive at the time agreed with you and check the plan with you first. Dust sheets go down over floors and anything close to the work, and anything electrical is made safe before work starts. The work itself takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. Managed buildings in London often need contractors booked in, and we can deal with the agent for a job in Edmonton.
- We find out about your home and the heating you have now.
- A heat loss survey is carried out, room by room.
- We design the system, check the radiators and cylinder and look at the outdoor unit position.
- Cost, grant and VAT appear on one fixed-price quote.
- Installation, commissioning and MCS registration complete the job.
Preparing for the visit
- Keep pets out of the rooms we are working in
- Make sure we can reach the outdoor unit, or where it will go
- Tell us about parking and loading
Getting a price
Want a quote for air source heat pumps? Please ring us on 07833 053749 or send an email and tell us about the job. We’ll explain what we’d recommend and why, then send a fixed-price quote before anything is booked.
Read more
Edmonton: your questions answered
Do I need permission to put air conditioning in my flat in Edmonton?
Often, yes, but the lease and the freeholder normally have a say. We look at where the outdoor unit could go, such as a balcony, flat roof or rear wall, and write it up for the freeholder or agent.
Will a heat pump in Edmonton need planning permission?
That depends on the building and where the outdoor unit goes. The centre of Edmonton is in a conservation area. The permitted development rules for heat pumps leave out listed buildings and stop outdoor units going on road-facing walls or roofs in conservation areas. Anything outside the rules needs an application, and we raise it with the local planning authority (for Edmonton, usually Enfield council) first.
Can I fit air conditioning or a heat pump myself?
The refrigerant side has to be done by a qualified engineer working for an F-Gas certified company. That is the law, not just our preference, and it also matters for the manufacturer’s warranty. We’re happy to quote for the full job, supply to commissioning.
How long does a heat pump installation take?
It takes a few days for most air-to-water installations, with air-to-air systems often quicker. How much of the heating changes decides most of the time, and we confirm the timing with your quote.
Do you work on commercial properties?
Yes. We work for homeowners, landlords, letting and managing agents, and businesses of every size in Edmonton and across Greater London. Tell us who should receive the paperwork.
Do I need to service the system to keep the warranty?
That depends on the brand. Where servicing is a condition, a missed service could give the manufacturer grounds to refuse a claim, so we explain the terms on your quote.
What’s the price of a heat pump installation?
An air-to-water heat pump costs £8,000–£16,000 (0% VAT on homes) before the grant. The Boiler Upgrade Scheme offers £7,500 to eligible homes in England and Wales, and we confirm eligibility before you commit.
Looking after your system
A little care keeps the system in better shape. Our advice:
- Keep the MCS certificate with the manufacturer’s paperwork
- Check what your manufacturer’s warranty asks of you
- Leave space around the outdoor unit
We show you how to use the controls and explain how a heat pump works differently from a boiler. Steady running suits a heat pump better than switching on and off, and we will explain the settings for your home.
Keep radiators and indoor units unobstructed so the heat can get into the room.
Honest limits
It’s worth knowing the limits before booking:
- Tax rulings, which only HMRC can give
- Improving the building’s insulation
- Planning decisions, which rest with the council
If in doubt, call us on 07833 053749 or use the quote form and we’ll say what we think before booking.
What the work covers
- Radiator systems
- Air-to-water heat pumps
- Underfloor heating
- Air-to-air heat pumps
- Hot water cylinders
- Homes heated by oil, LPG or gas
What a customer said
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager