Greater London · Heat pump installation
Heat pump installers in Upper Edmonton
One call covers air source heat pumps in Upper Edmonton, from the first look to sign-off. F-Gas certified, NICEIC approved and Checkatrade members.
- Ageing boilers that will need replacing
- Working out whether radiators need upsizing
- Questions about where the outdoor unit can go
Air source heat pumps in Upper Edmonton
Every installation starts with a heat loss survey. That tells us how much heat the home needs, room by room, so the heat pump and the radiators or indoor units can be sized properly. Sizing by rule of thumb isn’t good enough. If you are dealing with deciding which kind of heat pump suits the home and questions about where the outdoor unit can go, we can help.
A terrace in Upper Edmonton shares walls with its neighbours, which helps keep heat in, as long as there’s a sensible spot for the outdoor unit and its noise is checked against the MCS planning standard.
Whatever the visit, you get a written record: commissioning details for an installation, a fault and repair note for a repair, or a record of the service. File it with the manual, because it helps with any later warranty question.
- Place
- Upper Edmonton (N18, N9, N17)
- Wider area
- Greater London
- Quotes
- Fixed after a survey or photos
- Guide price
- £8,000–£16,000 (0% VAT on homes), before the grant
- Certified
- F-Gas certified, NICEIC approved, MCS
- Call
- 07833 053749
- Updated
- 30 October 2026
Your questions about air source heat pumps in Upper Edmonton
Is the heat pump grant available in Upper Edmonton?
Yes, the scheme covers homes in England, including Upper Edmonton, if they qualify. It gives £7,500 towards an air-to-water or ground source heat pump, or £2,500 towards an air-to-air heat pump that replaces the fossil-fuel heating and meets the whole home’s heating need. We hold MCS certification, so the application is ours to make for you.
Can you fit air conditioning in a London flat in Upper Edmonton?
Normally, yes, though leaseholders normally need the freeholder’s agreement. Permitted development rules for flats are tighter than for houses, so we check the outdoor unit position and give you the details to send to the freeholder or managing agent.
What does an air-to-water heat pump cost?
Expect £8,000–£16,000 for an air-to-water system, with 0% VAT on homes, before the grant is taken off. Where you land depends on the size of heat pump, any radiators that need changing and the hot water cylinder. Air-to-air is priced after a survey.
Which type of heat pump is right for my home?
Air-to-water suits homes with radiators and a cylinder; air-to-air suits rooms that need heating and cooling. The survey helps decide. Both are part of what we install.
How long will it take to install a heat pump?
The work takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. The survey lets us set a firm programme, so phone us on 07833 053749, or email if that’s easier to arrange one.
Do you work for landlords and businesses?
Yes. We work for homeowners, landlords, letting and managing agents, and businesses of every size in Upper Edmonton and across Greater London. Tell us who should receive the paperwork.
Why does F-Gas certification matter?
For refrigerant work, both the engineer and the company need the right F-gas credentials. It’s worth checking before you book and we’ll gladly show you ours.
Also near Upper Edmonton
What else we do in Upper Edmonton
Air source heat pumps around Upper Edmonton
About 48% of households live in flats, according to Census 2021 figures. A flat may have no room for a hot water cylinder, and the freeholder usually has a say on the outdoor unit, which can tip the choice towards air-to-air. In London, outside space and the rules for flats often decide which kind of heat pump suits.
Older homes near St Mary's Church may need extra checks for planning and heat loss before a heat pump is designed. Bruce Castle, roughly 1.1 miles south, is a reminder to check your home’s listing status: permitted development does not cover listed buildings.
Upper Edmonton is about 1 mile south of Edmonton, in Greater London. Upper Edmonton gets the same approach as every job we take on: diagnosis first, a fixed price and proper paperwork when we’ve finished. 764 places in Greater London are on our list, from busy centres to quieter spots. London is in our area too, around 8 miles away.
The closest recent job we can point to from Upper Edmonton was on Greenwich High Road, Greenwich (SE10), about 10 miles south: installing a Mitsubishi Electric wall-mounted unit in the retail area and a second unit in the stockroom and office.
Every address in N18, N9 and N17 is within our area, from busy streets to back roads. From Bull Lane, Park Lane and York Road to the smaller roads in between, nowhere is left out. Close to Upper Edmonton, our area also takes in Northumberland Park (1 mile south-east), Edmonton (1 mile north), Picketts Lock (2 miles north-east), South Chingford (2 miles east) and Winchmore Hill (2 miles north-west). We also work in nearby towns such as London (8 miles south), City of Westminster (8 miles south-west), Marylebone (8 miles south-west) and Kensington (10 miles south-west).
Around Upper Edmonton
Around Upper Edmonton, our work takes us to homes and businesses near Pymmes Park, Tottenham University Technical College and London Academy of Excellence Tottenham. There’s a railway station in Upper Edmonton itself: Silver Street station. A little further out are North Middlesex University Hospital (less than half a mile west) and Broomfield House Museum (2.2 miles west). The countryside around Upper Edmonton includes Pole Hill and Highams Park Lake.
Looking after it afterwards
Simple habits make a real difference. Our advice:
- Ask about the grant before you commit
- Avoid switching the heat pump on and off often
- Keep to regular servicing
If anything doesn’t seem right after installation, phone us on 07833 053749 and we’ll look into it. Annual servicing helps keep the system working well.
A well-insulated home helps a heat pump because it reduces the heat the system needs to supply.
What affects the cost of air source heat pumps
Every job gets its own quote. This is what makes a difference:
- The equipment or parts the job needs
- The size of the job
- One-off work versus a regular service cycle
Putting the work off seldom saves money. Small problems, from blocked filters to slow leaks, tend to get worse, and a struggling system uses more electricity to do less. If you’re unsure, phone us on 07833 053749, or email if that’s easier for straight advice and a fixed price.
What we need to know
To help us quote quickly, send us:
- Where the outdoor unit is, or where you’d like it
- Any previous service or F-Gas records
- The fuse board and where it is in the property
Published ranges are a starting point; the quote is built on your property, because no two buildings, rooms or systems are the same. After a look at the job, by photos or a survey, the price is fixed. To start, call 07833 053749 or email us.
What the work involves, system by system
VAT on heat pumps
Heat pumps in homes carry 0% VAT until 31 March 2027, and 5% after that, under HMRC Notice 708/6. Businesses pay the standard rate.
The Boiler Upgrade Scheme
Eligibility depends on the property and the scheme rules and we confirm it before anything is agreed.
What we do, step by step
On the day, we arrive at the time agreed with you and run through the plan before anything else. Dust sheets go down over floors and anything close to the work, and the electrics are made safe before any panel comes off. The work itself takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. The more we can see beforehand, the smoother the visit to Upper Edmonton will be.
- It begins with your house and the heating it relies on now.
- Every room’s heat loss is worked out on site.
- From those figures we size the heat pump and decide on radiators, cylinder and outdoor position.
- Cost, grant and VAT appear on one fixed-price quote.
- Installation, commissioning and MCS registration complete the job.
Before we arrive
- Find the manual or the paperwork for the system, if you have it
- Make sure someone can let us in at the agreed time
- Move furniture away from the wall where we’ll be working
Getting a price
Getting a quote is straightforward. Call or email with a few details and we will come back to you the same working day. If we need to see the property first, we book a survey at a time that works for you.
Advice
What a customer said
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager