Windsor and Maidenhead · Heat pump installation

Brookside air source heat pumps

Need air source heat pumps in Brookside? We look at the job first, give you a fixed-price quote and do the work at a time that suits you, finishing with proper records.

  • Comparing heat pump types
  • Ageing boilers that will need replacing
  • Questions about listed buildings or conservation areas

Air source heat pumps for Brookside

About our air source heat pumps in Brookside

We begin with a room-by-room heat loss survey. That tells us how much heat the home needs, room by room so the system is sized to match. Guesswork leads to systems that are too big or too small. If the problem is working out whether radiators need upsizing and no space for a hot water cylinder, we can help.

In a place like Brookside, some homes are listed, and permitted development doesn’t cover listed buildings, so we check consent first.

Warranty periods vary by brand and by product. For example, Daikin’s standard warranty on split air conditioning is 2 years, and its longer extensions apply to its air-to-water units only. For any other brand, we explain the manufacturer’s terms on your quote.

Where
Brookside (SL5, SL4)
Wider area
Windsor and Maidenhead
Costs
Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
Response
Same working day
Credentials
F-Gas certified company, NICEIC approved, MCS
Quote
Fixed after a survey or pictures
Call
07833 053749
Reviewed
30 October 2026

What the work involves, system by system

VAT on heat pumps

Please treat this as general guidance rather than tax advice.

Outdoor unit position and planning

Under permitted development, the outdoor unit must be 1.5 m³ or less, compliance with MCS 020(a), and use for more than cooling alone. It cannot be within the curtilage of a listed building.

Heat pumps in Brookside: local notes

About 63% of households live in detached or semi-detached houses, according to the last census (2021). Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.

Period properties close to Chapel of St Mary and St John can suit a heat pump, though insulation and any heritage protection are checked first. If your home is listed, like St Leonard's Hill about 3.2 miles north-east, listed building consent comes before any heat pump work.

Brookside is about 3 miles east of Wick Hill, in Windsor and Maidenhead. Brookside gets the same approach as every job we take on: diagnosis first, a fixed price and proper paperwork when we have finished. In Windsor and Maidenhead alone we list 57 places and Brookside is among them. Guildford, roughly 13 miles off, has its own page on this site.

The closest recent job we can point to from Brookside was on Princess Way, Camberley (GU15), about 7 miles south: installing a Samsung VRF system serving twelve rooms across two floors, including open-plan working areas, individual offices, a server room and a boardroom.

From New Road, The Avenue and Coach Road to the smaller roads in between, the whole area is covered. If your postcode is in SL5 and SL4, you’re inside the area we cover. We also cover North Ascot (1 mile south-west), Plaistow Green (1 mile north), Woodside (1 mile north-east), Ascot (1 mile south-east) and Winkfield (1 mile north-west). Further out, we also cover Maidenhead (7 miles north), Windsor (4 miles north-east), Boyn Hill (6 miles north-west) and Cookham (9 miles north).

Near you in Brookside

Locally, jobs take us to houses, flats and workplaces close to Ascot Heath Church of England Junior School and Royal Hunt pub. The closest station to Brookside is Ascot station, about 1.3 miles south. Well-known places in the area include Heatherwood Hospital (1 mile south) and The Lexicon (3 miles west). Not far away are Virginia Water Lake.

Map of Brookside © OpenStreetMap contributors

How it works

Refrigerant work is done by qualified engineers working for an F-Gas certified company, and electrical work is done by us as NICEIC approved contractors. So on the day, you do not need a separate electrician for the electrical side. On site, it takes a few days for most air-to-water installations, with air-to-air systems often quicker. Work in Brookside is booked in advance at a time that suits you.

  1. It starts with a conversation about the home, the existing heating and your plans.
  2. The survey measures heat loss room by room and looks at radiators, hot water and the best spot for the outdoor unit.
  3. The price comes back fixed and in writing, with the grant and VAT shown line by line.
  4. The outdoor unit, the indoor equipment and the controls are installed and connected.
  5. Once it’s running correctly, the MCS certificate is issued and we show you the settings.

Getting ready for the visit

  • Have the make and model of any existing unit to hand
  • Make sure we can reach the consumer unit or fuse board
  • Make sure we can reach the outdoor unit, or where it will go

Getting a quote

For a fixed-price quote, ring 07833 053749 or send an email with the address and a few details about the rooms or units involved. A few pictures make it quicker. We reply to enquiries the same working day.

Ask for a quote

Related advice

Questions from Brookside

Does the Boiler Upgrade Scheme cover homes in Brookside?

Yes, if the home and the heat pump meet the scheme’s rules: Brookside is in England, where it applies. For an air-to-water heat pump the amount is £7,500; an air-to-air system can get £2,500 if it replaces the fossil-fuel heating outright, meets the home’s full heating demand and is not an add-on to a boiler. We hold MCS certification, so the application is ours to make for you.

Can I fit a heat pump in Brookside without planning permission?

The answer turns on the property and where the outdoor unit would sit. Around 4 listed entries sit within 0.5 miles of central Brookside. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit can’t face a road. Where needed, we check with the planning department at Bracknell Forest council, typically the authority for Brookside.

Do you work in Brookside?

Yes. We work in Brookside and the rest of Windsor and Maidenhead, within the London and South East area we cover. To book, phone 07833 053749 or write to us at info@aircondoctor.co.uk.

Do I need to service the system to keep the warranty?

For some brands, yes. Read the manufacturer’s terms, or send us the make and model and we’ll explain them, and book the service at the interval they recommend.

Do I need new radiators for a heat pump?

The heat loss survey answers that, room by room. Rooms where the radiator is big enough stay as they are, and any that need upsizing are set out in the quote.

Can landlords and managing agents book you?

Yes. Homeowners, landlords, agents and businesses all book us across London and the South East. Tell us who should receive the paperwork.

Do you provide F-Gas records?

Yes, on every job. A new system comes with commissioning details, F-Gas records and the manufacturer’s warranty information, while repairs and services get a written note of what was found and done.

What owners can safely do

Owners can handle the everyday basics: keeping the outdoor unit clear, checking the mode and set temperature, and the routine cleaning in the manual. Anything inside the units, the electrics and the refrigerant is engineer’s work.

For air conditioning, cleaning the indoor unit’s filters is the main job owners can do where the manufacturer’s manual explains how. They come out, get a gentle clean and go back only when they’re dry. On a heat pump, the equivalent is keeping the outdoor unit clear and checking the controls.

Pricing air source heat pumps in Brookside

We quote each job individually. These are the things that affect it:

  • Whether the existing supply is suitable
  • Whether it’s a simple split or a larger system
  • What state the existing equipment is in

One room or a whole building, the quote is built the same way: what needs doing, how we get to it and what it needs. You will have a fixed price before work begins, with VAT shown clearly.

What to send for a quote

When you call or email, it’s useful to have:

  • A photo of the consumer unit with the cover closed
  • The paperwork from the last service, if you have it
  • Photos showing the indoor unit and the space around it

Quotes don’t take long. Call or email with a few details and we’ll come back to you the same working day. If we need to see the property first, we book a survey at a time that works for you.

From one of our customers

“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”

David W., Haywards Heath

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead