Surrey · Heat pump installation
Bisley air source heat pumps
For heat pump installation in Bisley, choose an F-Gas certified, NICEIC approved company. A fixed price before we start, and a 24/7 emergency line.
- Plans to switch to electric heating with a heat pump
- Replacing a combi boiler with a heat pump
- Questions about where the outdoor unit can go
Air source heat pumps in Bisley, done properly
Air-to-water heat pumps heat your hot water through a cylinder. Homes with a combi boiler may not have a cylinder, so finding space for one is part of the survey. Air-to-air systems don’t heat hot water, so you’ll need another way to do that. The work covers air-to-air heat pumps, hot water cylinders and underfloor heating, and the jobs we see most are ageing boilers that will need replacing and working out whether radiators need upsizing.
If your home near Bisley has no mains gas, the grant can be bigger. Until March 2027, homes on oil or LPG without mains gas can get an extra £1,500 through the Boiler Upgrade Scheme, for an air source or ground source heat pump.
Refrigerant work is written up in the F-Gas records: the work carried out, the refrigerant involved and the quantities. File them with the system’s paperwork, as a manufacturer or a future engineer may ask to see them.
- Place
- Bisley (GU24)
- Region
- Surrey
- Credentials
- F-Gas certified, NICEIC approved, MCS
- Enquiries
- Same working day
- Typical price
- £8,000–£16,000 (0% VAT on homes), before the grant
- Pricing
- A fixed price before any work starts
- Call
- 07833 053749
- Updated
- 30 October 2026
Looking after your system
Looking after it is simple, and it helps at the next service:
- Find out the grant position at the survey
- Book a yearly service
- Read the manufacturer’s warranty terms for your brand
Should you have questions after the install, give us a ring on 07833 053749 and we’ll look into it. Annual servicing helps keep the system working well.
Keep insulation and draught-proofing in good order because it reduces the heat the system needs to supply.
Air source heat pumps in Bisley: the local picture
The last census (2021) found about 81% of households in detached or semi-detached houses. Detached and semi-detached houses usually have room for the outdoor unit and a cylinder.
If your home is one of the older properties near Church of St John the Baptist, the survey checks whether it’s listed or in a conservation area before the outdoor unit position is chosen. Every heat pump design starts with a room-by-room heat loss calculation.
Bisley is about 3 miles west of Woking, in Surrey. Across the GU24 area, our engineers can take on air source heat pumps. 395 places in Surrey are on our list, from busy centres to quieter spots. For properties nearby, see our Guildford page, about 6 miles away.
The closest recent job we can point to from Bisley was on Goldsworth Road, Woking (GU21), about 3 miles east: installing a Daikin Perfera wall-mounted unit in the open-plan living area.
You will find Bisley on the A322, so it’s easy for us to get to. We cover every part of the GU24 postcode area and the roads nearby. Other places close to Bisley include Lucas Green (1 mile north-west), West End (1 mile north), Knaphill (1 mile south-east), Sheet's Heath (1 mile south) and Penny Pot (1 mile north-east). Within a short drive, we also cover Guildford (6 miles south-east), Woking (3 miles east), Camberley (4 miles west) and Farnham (11 miles south-west).
Landmarks near Bisley
Around Bisley, our work takes us to homes and businesses near Gordon's School, Bisley and West End Commons and The Crown pub, among other places. For rail, the closest station is Brookwood station, roughly 1.6 miles south. A little further out are The Peacocks (3.3 miles east) and The Museum of The National Rifle Association (1.4 miles south-west). Green spaces nearby include Brookwood Lye.
Questions from Bisley
Is the heat pump grant available in Bisley?
Yes, if the home and the heat pump meet the scheme’s rules: Bisley is in England, where it applies. The grant is £7,500 for an air source (air-to-water) heat pump and £2,500 for an air-to-air system that replaces the existing fossil-fuel heating. We hold MCS certification, so the application is ours to make for you.
Is planning permission needed for a heat pump in Bisley?
It depends on the property. Historic England lists about 7 buildings and structures within half a mile of the centre of Bisley. The permitted development rules for heat pumps leave out listed buildings and stop outdoor units going on road-facing walls or roofs in conservation areas. Anything outside the rules needs an application, and we raise it with the local planning authority (for Bisley, usually Surrey Heath council) first.
How does the warranty work?
It’s the manufacturer’s warranty, which varies by brand. Daikin, for instance, gives a standard 2 years on split air conditioning and we explain the terms for your brand on the quote.
Can you look at a system you didn’t fit?
Yes. We look at it first and tell you what we find, including anything about the original installation that needs putting right. You get a fixed price before any work goes ahead.
How much time does a heat pump install need?
A typical installation takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. We plan the work so you’re without heating for as little time as possible and agreed before work begins.
Do you have a 24/7 line?
Yes. Our emergency line runs 24/7 for breakdowns that cannot wait. Call 07833 053749 and tell us what’s happened.
Will my radiators work with a heat pump?
It depends on each radiator and the room it heats. At the lower temperatures a heat pump uses, radiators need more surface so we check every radiator against the room’s heat loss.
Pricing air source heat pumps in Bisley
The price is fixed before any work begins. It’s based on:
- What kind of system it is
- The distance and route between the indoor and outdoor units
- What state the existing equipment is in
Typical ranges are on our prices page, but each job is priced on what it involves. For a fixed-price quote, call 07833 053749 or write to us at info@aircondoctor.co.uk, and we’ll explain what it covers.
What to send for a quote
Simple jobs can often be priced from photos and some basics. Send what you can of the following:
- The postcode and whether it’s a home, flat or business
- A few pictures of the room and the wall the unit is on, or will go on
- Your installation or service records
Quoting starts with a diagnosis, from a site survey or, where the job is straightforward, from photos and measurements. Then you get a fixed price so you know the cost before we begin.
Nearby places to Bisley
Also in Bisley
How the visit works
We book the visit for a day and time that suit you, and we keep you posted if anything changes. On arrival, the engineer compares the job with the survey, your pictures or the details you gave us. Anything unexpected is raised with you before we go further. After that, it takes a few days on site, depending on the cylinder, the radiators and the pipework involved. Photos of the room and the outside wall help us plan a job near Bisley.
- First we talk through the property and the current system.
- Every room’s heat loss is worked out on site.
- We design the system, check the radiators and cylinder and look at the outdoor unit position.
- You get a fixed price, with any grant and the VAT set out.
- We install, commission and register the system under MCS.
How to prepare
- Tell us about any building rules, permits or sign-in
- Mention any roof access, ladders or high-level work
- Tell us about parking and loading
Getting a quote
Photos are the fastest route to a quote: the inside and outside of the property where the work is, plus the rating plate of any unit already there. Add the address and what you’d like done, and simple jobs can often be priced without a visit.
Related advice
Safe owner checks
For air conditioning, cleaning the indoor unit’s filters is the main job owners can do where the manufacturer’s manual explains how. They come out, get a gentle clean and go back only when they’re dry. For a heat pump, the main owner jobs are a clear outdoor unit and sensible control settings.
Owner care supports servicing; it doesn’t replace it. Clean filters and a clear outdoor unit help the system run as it should, but the refrigerant circuit, the electrics and the parts you cannot see still need an engineer at the interval the manufacturer recommends.
What a customer said
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager