Greater London · Heat pump installation
Heat pump installation in Belvedere, Greater London
Air source heat pumps for Belvedere, from F-Gas certified engineers, with warranty terms explained brand by brand. Enquiries answered the same working day.
- Radiators that may be too small for a heat pump
- Questions about the Boiler Upgrade Scheme
- Checking whether planning permission is needed
How we handle air source heat pumps in Belvedere
We install air source heat pumps in Belvedere and across Greater London, and we are MCS certified. Air-to-water systems feed your radiators or underfloor heating and hot water cylinder, while air-to-air systems heat rooms directly through indoor units and can cool them too. We will explain which type fits your home and why. Common call-outs are for checking emitters for a heat pump and deciding on the outdoor unit position, across underfloor heating, hot water cylinders and radiator systems.
In a London area like Belvedere, many homes are flats or terraces with little outside space, and that decides which kind of heat pump works. Air-to-water needs room for the outdoor unit and usually a cylinder, while an air-to-air system needs less space.
Warranty periods vary by brand and by product. Daikin, for instance, gives a standard 2 years on split air conditioning, with longer extensions only on its air-to-water heat pumps. For any other brand, we explain the manufacturer’s terms on your quote.
- Place
- Belvedere (DA17, DA8, DA18)
- Region
- Greater London
- Costs
- £8,000–£16,000 before the grant, 0% VAT on homes
- Quotes
- A fixed price before any work starts
- Certified
- NICEIC approved, F-Gas certified, MCS
- Phone
- 07833 053749
- Updated
- 30 October 2026
After we’ve gone
Here’s the after-treatment advice, short and simple:
- Check eligibility for the Boiler Upgrade Scheme early
- Know the servicing conditions in your warranty
- Book a yearly service
We show you how to use the controls and explain how a heat pump works differently from a boiler. Steady running suits a heat pump better than switching on and off so we set the controls up with you.
Have the system serviced regularly. Check the manufacturer’s terms, as they may include servicing conditions.
FAQs for Belvedere
Can I fit a heat pump in Belvedere without planning permission?
That depends on the building and where the outdoor unit goes. The Erith Road Conservation Area is close to the centre of Belvedere. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit cannot face a road. Where necessary, we check with the local planning authority (for Belvedere, usually Bexley council).
Do I need permission to put air conditioning in my flat in Belvedere?
Often, yes, but the lease and the freeholder typically have a say. Permitted development rules for flats are tighter than for houses, so we check the outdoor unit position and give you the details to send to the freeholder or managing agent.
Will you make a mess?
We put dust sheets over floors and furniture near the work first, and the area is kept tidy throughout. At the end, we clear up and show you what we’ve done.
Do you work on commercial properties?
Yes. We work for homeowners, landlords, letting and managing agents, and businesses of every size across London and the South East. Let us know who the records should go to.
Will I get records for the system?
Yes, on every job. New installations come with commissioning details, F-Gas records and warranty information, while repairs and services get a written note of what was found and done.
Do you work on all makes?
We work with the leading brands, including Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. Send us the make and model if you have it.
Do you cover Belvedere?
Yes. Our engineers work in Belvedere, within the South East and London area we cover. We’re based in East Grinstead, West Sussex.
Air source heat pumps in Belvedere: the local picture
London homes can be short of space for an outdoor unit and cylinder, which affects the choice of heat pump.
For a home near Belvedere station, the survey looks at whether an air-to-water or air-to-air heat pump suits better.
Belvedere is about 3 miles east of Plumstead, in Greater London. Anywhere in DA17, we can help with air source heat pumps. Our list for Greater London has 764 entries, and Belvedere is one. Our Bromley page covers places nearby (8 miles or so).
Not far from Belvedere, a recent job of ours was on Greenwich High Road, Greenwich (SE10), about 7 miles west: installing a Mitsubishi Electric wall-mounted unit in the retail area and a second unit in the stockroom and office.
That includes properties on Cray Road, Adit Road and Clive Road and nearby roads. Work in DA17, DA8 and DA18 follows the same survey, fixed-price quote and written records as everywhere else we cover. Close to Belvedere, our area also takes in Lessness Heath (1 mile west), Erith (1 mile south-east), Northumberland Heath (1 mile south-east), Bexley Riverside (1 mile south-east) and West Heath (1 mile south-west). Larger places within reach include London (11 miles west), City of Westminster (13 miles west), Marylebone (13 miles west) and Kensington (15 miles west).
What’s near Belvedere
Around Belvedere, our work takes us to homes and businesses near Trinity School, Lesnes Abbey Woods and Priory Club pub, among other places. The closest station to Belvedere is Belvedere station, roughly 0.5 miles north of the centre. Nearby you will also find Broadway Shopping Centre (2.1 miles south) and Erith Museum (1.1 miles east). The countryside around Belvedere includes Crossness Nature Reserve.
Nearby places to Belvedere
Other services in Belvedere
Do you need air source heat pumps in Belvedere?
The Boiler Upgrade Scheme has made people ask whether their home could qualify. Eligibility depends on the property, the system and the scheme rules and we confirm it before you go ahead.
These are the situations we see most often:
- Ageing boilers that will need replacing
- Checking eligibility for a heat pump grant
- No space for a hot water cylinder
Red House lies about 2.3 miles south-west. Owners of listed homes need consent before a heat pump is fitted, so it’s one of our first questions.
Before booking anyone
- What happens if the job turns out to be different on the day
- Why the equipment they’re quoting suits the job
- Whether the quote is a fixed price
What we do, step by step
Each visit follows the same order: agree the plan on site, protect the area, do the work, test what we’ve done and talk you through it. On site, the work takes from a couple of days to around a week, depending on the system and how much of the heating changes. Let us know who controls access to the building in Belvedere, as that saves time on the day.
- We start with your plans and the property.
- The survey checks heat loss, emitters, hot water and the outdoor unit position.
- You get our view on the right type for the house, and on whether the Boiler Upgrade Scheme applies.
- We install the heat pump and connect it up.
- The job ends with commissioning, the MCS certificate and a walk through the controls.
Getting ready for the visit
- Let us know if the building has a permit or sign-in process
- Find the manual or the paperwork for the system, if you have it
- Clear a path to the units and the space around them
Get a fixed-price quote
Photos are enough for some jobs; others need a visit first. Multi-room systems, commercial buildings and anything with a long or hidden pipe route are normally surveyed first. Either way, you get a fixed price before any work is booked.
Related advice
Why act early in Belvedere
A heat pump sized without a proper heat loss survey can struggle in cold weather or run inefficiently. A room-by-room survey gets it right first time. Getting the work done in Belvedere before summer avoids the busiest weeks.
One room or a whole building, the quote is built the same way: the work involved, the access and the equipment. You will have a fixed price before work begins, with VAT shown clearly.
Why book with us
- 24/7 emergency line for breakdowns
- We work on all the leading brands
- A reply the same working day
- NICEIC approved electrical contractors
What a customer said
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead