Greater London · Heat pump installation

Heat pump installers in Bexley Riverside

Looking for air source heat pumps in Bexley Riverside? We diagnose first, fix the price and book the work around you, finishing with proper records.

  • Questions about listed buildings or conservation areas
  • Plans to switch to electric heating with a heat pump
  • Replacing a combi boiler with a heat pump

Air source heat pumps in Bexley Riverside and nearby

How we handle air source heat pumps in Bexley Riverside

A £2,500 grant is available for some air-to-air heat pumps, with conditions. The system must replace the existing fossil-fuel heating and meet the home’s full heating demand, it must be installed by an MCS certified installer, and it must be in a home; adding it alongside a boiler does not qualify. We’re often asked to deal with working out where a cylinder could go and radiators that may be too small for a heat pump, across underfloor heating, homes heated by oil, LPG or gas and air-to-water heat pumps.

In a London area like Bexley Riverside, many homes are flats or terraces with little outside space, which affects which heat pump suits. An air-to-water system needs space outside and typically a hot water cylinder inside, while air-to-air units take less room.

Some manufacturers make regular servicing by a qualified engineer a condition of their warranty. Where yours does, a regular service with us keeps that side in order, and every service is written up.

Place
Bexley Riverside (DA8, DA7, DA1)
Region
Greater London
Response
On the working day you ask
Pricing
Fixed, in writing
Price guide
£8,000–£16,000 before the grant, 0% VAT on homes
Approvals
F-Gas certified company, NICEIC approved, MCS
Call
07833 053749
Checked
30 October 2026

Owner checks or an engineer?

Never try to top up, release or handle refrigerant yourself. Under the F-gas rules, engineers need their own qualifications and the company must be certified, and escaping refrigerant can cause cold burns. A suspected leak is our job, not yours.

On air conditioning, the filters in the indoor unit are normally the one part owners can clean, if the manual says so. They come out, get a gentle clean and go back only when they’re dry. For a heat pump, the main owner jobs are a clear outdoor unit and sensible control settings.

How it works

If the system has to be off for part of the visit, we tell you before work begins, so you can plan around it. For businesses, we can typically work room by room or zone by zone. The work takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. Before a visit in Bexley Riverside, we ask where the van can stop and how we reach the outdoor unit.

  1. We start with your plans and the property.
  2. The survey checks heat loss, emitters, hot water and the outdoor unit position.
  3. We recommend air-to-water or air-to-air and check the grant position.
  4. We install the heat pump and connect it up.
  5. After commissioning, you get the MCS certificate and a handover.

Preparing for the visit

  • Tell us about parking and loading
  • Have the make and model of any existing unit to hand
  • Make sure we can reach the consumer unit or fuse board

Ask for a quote

To help us quote: where the property is and what kind of building it is, a few photos, the brand and model of anything already fitted and anything you’ve noticed, such as an error code or a noise. Once you have those, phone 07833 053749 or use the quote form.

Get a quick quote

Related advice

Looking after your system

Think of this as the after-treatment advice, in brief:

  • Check what your manufacturer’s warranty asks of you
  • Clear leaves and debris from the outdoor unit
  • Check eligibility for the Boiler Upgrade Scheme early

Handover includes the controls and how to get the best from a heat pump. Steady running suits a heat pump better than switching on and off so we set the controls up with you.

A well-insulated home helps a heat pump, as lower heat loss means the system has less to do.

Different systems, different jobs

The Boiler Upgrade Scheme

In England and Wales, the Boiler Upgrade Scheme offers grants towards heat pumps: £7,500 for air-to-water (and ground source), and £2,500 for air-to-air with strict conditions. The installer applies.

Heat loss surveys

We look at walls, windows, floors, roofs and ventilation, and the size of each room.

Homes in Bexley Riverside and heat pumps

Valuation Office Agency council tax records show about 40% of homes across Bexley Riverside and its surrounding area date from 1919 to 1939. Whether the walls and loft have been insulated makes a real difference to the heat pump size for homes of that period. In London, outside space and the rules for flats often decide which kind of heat pump suits.

Period properties close to St Paul's can suit a heat pump, though insulation and any heritage protection are checked first. Homeowners near Barnehurst station often ask whether a heat pump can take over from the boiler, and the heat loss survey answers that.

Bexley Riverside is about 3 miles north-west of Dartford, in Greater London. Homes and businesses alike in Bexley Riverside, we can help with air source heat pumps. We reply to enquiries the same working day, and there’s a 24/7 emergency line. Our Greater London coverage runs to 764 places, and Bexley Riverside is one of them. Bromley, roughly 8 miles off, has its own page on this site.

Our nearest recent job to Bexley Riverside was on Station Road, Orpington (BR6), about 7 miles south-west: installing three Daikin cassette units in the main office area and a wall-mounted unit in the client meeting room.

Our working area takes in DA8, DA7 and DA1, every street of it. Mill Road, Hurst Road and Bexley Road and the roads off them are all inside our area. Places around Bexley Riverside that are also on our list: Northumberland Heath (1 mile north-west), Barnehurst (1 mile south), Erith (1 mile north), North End (1 mile east) and Slade Green (1 mile east). Further out, we also cover London (12 miles west), City of Westminster (14 miles west), Marylebone (14 miles west) and St Pancras (13 miles west).

What’s near Bexley Riverside

In Bexley Riverside, that means homes and buildings near Braeburn Park, The Royal Oak pub and Trinity School, among other places. The nearest railway station is Barnehurst station, roughly 0.6 miles south-west. Well-known places in the area include Broadway Shopping Centre (1.4 miles south-west) and Erith and District Hospital (0.5 miles north). The countryside around Bexley Riverside includes Wansunt Pit.

Map of Bexley Riverside © OpenStreetMap contributors

FAQs for Bexley Riverside

Can you fit air conditioning in a London flat in Bexley Riverside?

Usually, yes, though leaseholders normally need the freeholder’s agreement. We look at where the outdoor unit could go, such as a balcony, flat roof or rear wall, and write it up for the freeholder or agent.

Is Bexley Riverside in your area for air source heat pumps?

Yes. Bexley Riverside is one of the places we cover. Tell us a little about the job and we’ll take it from there.

How soon will you get back to me?

You will hear from us the same working day. For a breakdown that can’t wait, call our 24/7 emergency line.

Is there a survey before the work?

Yes. Photos often do the job for simple work, while bigger systems and repairs that need testing get a visit.

Who is responsible for leak checks?

Responsibility is shared between the operator, usually whoever owns or controls the equipment, and the service technicians. The interval depends on the refrigerant charge, measured in tonnes of CO2 equivalent: at least yearly for 5 to under 50 tCO2e, and every 6 months for 50 to under 500 tCO2e.

How does the warranty work?

It’s the manufacturer’s warranty, which varies by brand. For example, Daikin’s standard warranty on split air conditioning is 2 years, and we explain the terms for whichever brand you choose.

Do you work for landlords and businesses?

Yes. Homeowners, landlords, agents and businesses all book us in Bexley Riverside and across Greater London. Tell us who should receive the paperwork.

What a customer said

“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”

David W., Haywards Heath

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead