Kent · Heat pump installation
Heat pump installation in Ash, Kent
Expert air source heat pumps for Ash: a survey or diagnosis, a fixed price, careful work and proper paperwork. Ask us for a fixed-price quote.
- Checking whether planning permission is needed
- Working out where a cylinder could go
- Plans to switch to electric heating with a heat pump
Air source heat pumps around Ash
About 37% of homes in the Ash area were built before 1919, according to VOA council tax data, and the last census (2021) found about 78% of households in detached or semi-detached houses. In older homes, the heat loss calculation is especially important, as solid walls and draughts change the size of heat pump needed. Houses normally have space for an outdoor unit and a hot water cylinder.
Goodnestone Park lies about 3.3 miles south-west. Owners of listed homes need consent before a heat pump is fitted, so it’s one of our first questions.
Ash is about 7 miles north-west of Deal, in Kent. For air source heat pumps in and around Ash, it’s easy to get a fixed-price quote: please ring 07833 053749 or use the quote form. Our area covers London and the South East, Ash included. We cover 922 places across Kent, from busy centres to quieter spots. We also work in Bromley, about 55 miles from Ash.
We work across CT3 for air source heat pumps and the roads nearby. If you need air source heat pumps at a property on The Street, Goodban Square and Chilton Place or a nearby road, we can help. Neighbouring places we cover include Guilton (1 mile west), Weddington (1 mile north-east), Durlock (1 mile west), Cop Street (1 mile north) and Coombe (1 mile south-east). Further out, we also cover Canterbury (9 miles west), Margate (8 miles north-east), Dover (10 miles south) and Folkestone (14 miles south).
Landmarks near Ash
Around Ash, our work takes us to homes and businesses near The Chequer Inn. Ash’s nearest station is Sandwich station, roughly 2.8 miles east. A little further out are White Mill (2.1 miles east). The countryside around Ash includes Monk's Wall nature reserve.
How we handle air source heat pumps in Ash
Many air source heat pumps can be installed as permitted development in England, without a planning application. The conditions include an outdoor unit of no more than 1.5 m³ and compliance with MCS 020(a), and the unit can’t be used solely for cooling or sit within the curtilage of a listed building. We check the rules for your property as part of the survey. We’re often asked to deal with checking emitters for a heat pump and working out where a cylinder could go, on hot water cylinders, homes heated by oil, LPG or gas and air-to-air heat pumps.
Cottages and older homes near Ash can lose heat faster, so a proper heat loss calculation matters. Sometimes insulating first makes more sense.
Each manufacturer sets its own warranty period. Daikin, for instance, gives a standard 2 years on split air conditioning, with longer extensions only on its air-to-water heat pumps. For any other brand, we explain the manufacturer’s terms on your quote.
- Location
- Ash (CT3)
- Wider area
- Kent
- Pricing
- A fixed-price quote up front
- Prices
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Approvals
- NICEIC and F-Gas, MCS
- Enquiries
- We reply the same working day
- Telephone
- 07833 053749
- Updated
- 30 October 2026
The process
We book the visit for a day and time that suit you, and we let you know if plans need to move. On arrival, the engineer compares the job with the survey, your pictures or the details you gave us. If something is different, we talk it through with you before carrying on. After that, it takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. Photos of the room and the outside wall help us plan a job near Ash.
- It begins with your house and the heating it relies on now.
- We measure heat loss for every room.
- From those figures we size the heat pump and decide on radiators, cylinder and outdoor position.
- You get a fixed price, with any grant and the VAT set out.
- Installation, commissioning and MCS registration complete the job.
How to prepare
- Find the manual or the paperwork for the system, if you have it
- Make sure someone can let us in at the agreed time
- Keep pets and children away from the work area
Getting a quote
For a fixed-price quote, ring us on 07833 053749 or drop us a line and tell us about the property and what you need. A few pictures make it quicker. We reply to enquiries the same working day.
Related advice
Nearby places to Ash
Also in Ash
Pricing air source heat pumps in Ash
The survey or diagnosis tells us what the work involves. We look at:
- A single visit or a regular plan
- The pipe route between the units
- How easy the units are to reach
Height, access and the distance between the indoor and outdoor units can all change the price. We take each of them into account, and the price is fixed before we start.
Helping us quote
The more you tell us, the more accurate the quote. With your enquiry, please include:
- A short video of any fault, such as a noise or a flashing light
- The address and the type of property
- The fuse board and where it is in the property
Want a quote for air source heat pumps? Please ring us on 07833 053749 or use the quote form and tell us about the job. We’ll explain what we’d recommend and why, then send a fixed-price quote before anything is booked.
Why act early in Ash
Planning rules have specific conditions. We look at the planning position early, so there are no surprises covering listed buildings, conservation areas and any Article 4 direction. Planning ahead for a job near Ash means we can arrive with everything needed.
Homes, offices, shops and public buildings are all priced the same way: the equipment, the access, the work involved and the time it takes. Call for a fixed-price quote and we’ll explain each part.
What you get with us
- Diagnosis first, then a fixed price
- Warranty terms set out brand by brand
- MCS certified heat pump installers
- 24/7 emergency line for breakdowns
Signs you need air source heat pumps in Ash
Homes off the gas grid, heated by oil or LPG, are often good candidates to look at. Until March 2027, an extra £1,500 is available for air source and ground source heat pumps in homes heated by oil or LPG with no mains gas where the home is eligible.
Most people get in touch after spotting one of these:
- No space for a hot water cylinder
- Choosing between air-to-water and air-to-air
- Radiators that may be too small for a heat pump
Live in one of the older houses around Church of St Nicholas? Expect the survey to look closely at heat loss and at the building’s planning status.
What your quote should include
- Whether the company is F-Gas certified, and whether you can check it
- Why the equipment they’re quoting suits the job
- What paperwork you’ll receive afterwards
Common questions in Ash
Can I fit a heat pump in Ash without planning permission?
It comes down to the building and the spot chosen for the outdoor unit. Central Ash sits inside a conservation area. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit can’t face a road. Where necessary, we check with Dover council, which is normally the planning authority for Ash.
Does the Boiler Upgrade Scheme cover homes in Ash?
Ash is covered, as the scheme runs across England and Wales. It gives £7,500 towards an air-to-water or ground source heat pump, or £2,500 towards an air-to-air heat pump that replaces the fossil-fuel heating and meets the whole home’s heating need. You do not apply yourself: the MCS certified installer does, which is us.
Who has to arrange F-Gas leak checks?
The F-gas rules share it between the equipment’s operator and the engineers who work on it. The interval depends on the refrigerant charge, measured in tonnes of CO2 equivalent: at least every 12 months from 5 tCO2e, and every 6 months from 50 tCO2e.
How quickly will you reply?
On the same working day you contact us. After that, we agree a survey, diagnosis or installation date that suits you, with a fixed price before work starts.
Do you offer maintenance contracts?
Yes. Maintenance contracts are part of what we do, with visits at the interval your system and the manufacturer need. Each visit is written up, with F-Gas records where refrigerant work is involved.
Do you work on commercial properties?
Yes. Homeowners, landlords, agents and businesses all book us in Ash and across Kent. Let us know who the records should go to.
Do you protect the property while you work?
We start with protection: dust sheets over floors and anything close to the work. Any drilling is agreed with you first, and we clear up the dust and offcuts before we leave.
From one of our customers
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager