Hampshire · RG22
Air conditioning in RG22
Our engineers cover all of the RG22 postcode district, which takes in Kempshott, Buckskin and Brighton Hill. You get a fixed-price quote before any work starts.
Towns and villages in RG22
Air conditioning services in RG22
- Air conditioning repair
- Commercial air conditioning
- Heat pump installation
- Air conditioning installation
- Air conditioning servicing
- Every service
For a price, call 07833 053749 or write to us at info@aircondoctor.co.uk.
Postcodes nearby
Elsewhere in Hampshire
Towns and villages in Hampshire
All areas
Our air conditioning service in RG22
Think of it as diagnose, treat and sign off: survey first, install second, commission and hand over last. The sign-off includes testing every mode, showing you the controls and handing over the F-Gas records. The work covers air-to-air heat pumps, ceiling cassettes and VRF systems, and people most often call us about commercial rooms that are too warm for staff and expensive direct electric heating.
Our engineers bring the tools, gauges and access equipment the job needs. All we ask is clear access to the units, or to where they’ll go, and to the consumer unit. The visit takes anything from a day for one room to several days for a multi-room or ducted system.
- Diagnosis comes first, with a survey of the rooms, outside space and fuse board.
- Then the prescription: the right system and size for each room, on a fixed-price quote.
- The treatment: units fitted, pipework and drain routed, and the electrics installed.
- Checks: a pressure test for leaks, then a vacuum to clear moisture.
- The sign-off: commissioning, a walk through the controls, and the F-Gas records and warranty details.
Pricing in RG22
Putting several jobs into one visit often makes better use of the time. Mention every unit or room you need covered and we will price it together.
Why choose AirCon Doctor
- A reply the same working day
- Leading brands including Daikin, Mitsubishi Electric and Fujitsu
- Checkatrade member
- MCS certified for heat pumps
Get a fixed-price quote
VAT is set out clearly on every quote, and the rate that applies to your job is stated. Homes, businesses and different kinds of work can be treated differently for VAT, so we confirm it on the quote. For a fixed-price quote, ring 07833 053749, or email if that’s easier.
Around Kempshott
Around Kempshott, our work takes us to homes and businesses near Saint Mark's Church, Kempshott Junior School and Coppice Spring School. The nearest railway station is Basingstoke station, roughly 2.8 miles north-east of the centre. A little further out are Willis Museum (2.6 miles north-east) and The Malls (2.8 miles north-east). Open spaces near Kempshott include Daneshill Park Woods and Farleigh Hill.
Where we install in RG22
Our air conditioning work across RG22 takes in places such as Basingstoke, Kempshott and Buckskin and the smaller places around them. Every place on our RG22 list (9 in all) is covered.
RG22 is within the area we cover from our base in East Grinstead. Every job starts with a site survey or pictures, then a fixed-price quote.
Kempshott: If your home is in one of the older streets near Saint Mark's Church, it’s worth checking whether it’s listed or in a conservation area before an install. The Vyne (roughly 4.9 miles north-east) shows the area has its share of heritage. A listed home needs consent before an outdoor unit or pipework goes on.
Leave it or put it right?
Refrigerant rules have changed what new systems use. Since 2025, new single split systems with less than 3 kg of refrigerant cannot use F gases with a GWP above 750, so new splits use refrigerants such as R32, with a GWP of 675. R410A, used in many older systems, has a GWP of 2088.
What your quote should include
- Which VAT rate the quote uses, and why
- Whether the company is F-Gas certified, and whether you can check it
- What paperwork you will receive afterwards
- Exactly what the price includes, from supply and fitting to commissioning
Safe owner checks
For air conditioning, cleaning the indoor unit’s filters is the main job owners can do where the manufacturer’s manual explains how. With the power off, they lift out, can be vacuumed or rinsed and must be fully dry before they go back. For a heat pump, the main owner jobs are a clear outdoor unit and sensible control settings.
Don’t move, re-route or disconnect units or pipework yourself. Moving a unit involves the refrigerant circuit, so it needs an F-Gas qualified engineer, and the electrical side needs a competent person. Ask us to quote for a move instead.
What affects the quote in RG22
Before we fix a price, we need to know a few things. We check:
- The brand, model and parts involved
- Whether it’s a one-off job or part of a maintenance contract
- What electrical work the job needs
- Access, including height, roofs and ladders
Our prices page shows typical ranges, but your price depends on the job in front of us. Call for a fixed-price quote, and we’ll explain what it covers.
What we need to know
The more you tell us, the more accurate the quote. When you get in touch, it helps to send:
- Any error code or flashing light on the display
- Your installation or service records
- Photos showing the indoor unit and the space around it
- Where the property is and what kind of building it is
Photos are enough for some jobs; others need a visit first. Bigger systems, commercial sites and awkward pipe routes are normally surveyed on site. Either way, you get a fixed price before any work is booked.
Common problems we fix in RG22
Most overheating comes from heat gained through the day. Sun through large windows, roof lights and glazed doors is the biggest source in many rooms, and the heat lingers long after the sun has moved round.
Common reasons people call us include:
- A home office that warms up with screens and equipment
- A system on old refrigerant that is due for replacement
- Not knowing which system, size or brand to choose
- A room that is unbearable on warm days
Questions from RG22
Do I need planning permission?
That depends on what’s being fitted and where. Heat pumps on houses in England can be permitted development when they meet set conditions, including the MCS 020(a) noise check, but a cooling-only unit isn’t covered, so check with the council. Listed buildings, conservation areas and flats have extra limits. This is general information, not legal advice.
Can the outdoor unit go on a roof or at ground level?
Wall brackets, ground level and flat roofs are all options, wherever the pipe route, airflow and servicing access work best. Noise near bedrooms and boundaries is part of the decision and position can affect planning.
Will you work on another installer’s system?
Yes. We work on systems fitted by other installers as well as our own from all the leading brands. Send us the make and model, and any records you have.
Do you work on commercial properties?
Yes. We work for homeowners, landlords, letting and managing agents, and businesses of every size across London and the South East. Let us know who the records should go to.
How long does air conditioning installation take?
Allow a day or more, depending on the number of rooms, the pipe routes and the access. The survey tells us how long your installation will need, so you can plan around it.
Do you offer maintenance contracts?
Yes. Maintenance contracts are part of what we do, set at the interval the system and the manufacturer’s terms need. Each visit is written up, with F-Gas records where refrigerant work is involved.
Do I need a new electrical circuit?
Most systems need their own supply from the consumer unit. Under Part P, a new circuit has to be notified unless a registered competent person does it, and we are NICEIC approved, so we can install and certify it.