Oxfordshire · OX11
Air conditioning in OX11
Our engineers cover all of the OX11 postcode district, including Didcot, Great Western Park and Harwell. You get a fixed-price quote before any work starts.
Where we work in OX11
- Didcot
- Great Western Park
- Harwell
- Chilton
- Blewbury
- East Hagbourne
- Upton
- Aston Upthorpe
- South Moreton
- North Moreton
- Aston Tirrold
- Rowstock
- West Hagbourne
- Coscote
- Woodway
- Milton
What we do in OX11
- Air conditioning repair
- Air conditioning installation
- Air conditioning servicing
- Commercial air conditioning
- Heat pump installation
- Every service
To book a survey or ask a question, phone us on 07833 053749.
Postcodes nearby
Elsewhere in Oxfordshire
Every town in Oxfordshire
All areas
How air conditioning works in OX11
A new system normally needs a dedicated circuit from the fuse board. Under Part P, a new circuit is notifiable unless a registered competent person does it, and as NICEIC approved contractors we can install and certify it as part of the job. Typical jobs include uncertainty over the right type and size of system and an old system that needs replacing, across multi-split systems, ceiling cassettes and VRF systems.
Where something has to be switched off during the work, we agree it with you first so it does not catch you out. For businesses, we can normally work room by room or zone by zone. On site, it takes a day or more, depending on the number of rooms, the pipe routes and the access.
- First the diagnosis: a survey of the rooms, the walls, the outside and the electrics.
- Next, a recommendation for each room and a fixed price.
- Then the work: units up, pipes and drain run, and a new circuit where necessary.
- Checks: a pressure test for leaks, then a vacuum to clear moisture.
- The sign-off: commissioning, a walk through the controls, and the F-Gas records and warranty details.
Pricing in OX11
Whatever the property, the quote works the same way: what’s needed, how we reach it, the parts and the labour. Call for a fixed-price quote and we will go through it with you.
What you get with us
- Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba and more
- Listed on Checkatrade
- Warranty terms set out brand by brand
- A fixed price before any work starts
Getting a price
Photos are enough for some jobs; others need a visit first. Multi-room systems, commercial buildings and anything with a long or hidden pipe route are normally surveyed first. Either way, you get a fixed price before any work is booked.
Landmarks near Didcot
Locally, jobs take us to houses, flats and workplaces close to The Queens Arms, Manor Primary School and UTC Oxfordshire and the streets around them. Nearby too are Church of All Saints (less than half a mile north-west) and Didcot Girls' School (under half a mile south-west). There’s a railway station in Didcot itself: Didcot Parkway station. Nearby you will also find Abingdon Community Hospital (4.8 miles north-west) and Brightwell Castle (3.4 miles east). Not far away are Mowbray Fields and Wittenham Clumps.
Where we install in OX11
From Didcot, Great Western Park and Harwell outwards, OX11 has every kind of home. We survey every property before we quote, then a fixed-price quote.
Our area stretches from Greater London through Surrey, Kent and Sussex to Hampshire, Berkshire, Buckinghamshire, Oxfordshire, Hertfordshire and Essex, and OX11 sits within it. You reach the same people wherever you are in it.
Didcot: If you work from home near Didcot Parkway station, a home office that overheats is one of the easiest rooms to cool. Older streets near Church of All Saints may fall within a conservation area, so we check the planning position before choosing where the outdoor unit goes.
System by system
Ceiling cassettes
For wide rooms, a cassette spreads the air more evenly than one wall unit with just a grille visible in the ceiling.
Wall-mounted split systems
Bedrooms, offices and living spaces are where wall-mounted units are most often fitted. The unit goes where it spreads the air well and the filters are easy to reach, and away from where the air would blow straight onto people.
Before you call an engineer
There are a few things you can safely do yourself: keeping the outdoor unit clear, checking the mode and set temperature, and the routine cleaning in the manual. Anything inside the units, the electrics and the refrigerant is engineer’s work.
For air conditioning, cleaning the indoor unit’s filters is the main job owners can do where the manufacturer’s manual explains how. With the power off, they lift out, can be vacuumed or rinsed and must be fully dry before they go back. For a heat pump, the main owner jobs are a clear outdoor unit and sensible control settings.
Signs you need air conditioning
Not everyone is after cooling. Old direct electric heaters turn electricity straight into heat, while a heat pump moves heat in from the outside air, which means more heat out than electricity in. Most modern split systems work this way.
Most people get in touch after spotting something like this:
- Too many options and no clear advice
- Commercial rooms that are too warm for staff
- Bedrooms and offices that overheat in summer
- A home office that warms up with screens and equipment
Aftercare tips
Every system needs looking after, and most of it is easy. Our tips:
- Tell us if the unit starts to leak, rattle or show a code
- Keep to the service interval the manufacturer recommends
- Keep the F-Gas records, commissioning details and warranty information together
- Keep the indoor unit’s filters clean
We recommend an annual service, and some manufacturers make servicing a warranty condition. We can remind you when it’s due, so it does not get forgotten.
Clean the filters regularly, not just at the service. Clean filters keep the air moving and help the system work as designed, so it uses less electricity for the same comfort.
FAQs for OX11
Why use an F-Gas certified company?
F-Gas certification shows a company is approved to work on equipment containing fluorinated gases, such as the refrigerant in air conditioning and heat pumps. That is not optional: it’s required by law, and we hold it.
Do you work on systems someone else installed?
Yes. We start with a proper look and tell you honestly what we find, including any issues with how it was fitted. You get a fixed price before any work goes ahead.
Do you provide F-Gas records?
Yes, on every job. A new system comes with commissioning details, F-Gas records and the manufacturer’s warranty information, and repairs and services get a record of the work.
Do I need a new electrical circuit?
Most systems need their own supply from the consumer unit. Adding a new circuit is notifiable building work under Part P unless it’s done by a registered competent person, and we are NICEIC approved, so we can install and certify it.
Can I do any of the installation myself?
The refrigerant side has to be done by a qualified engineer working for an F-Gas certified company. That is a legal requirement, and it also matters for the manufacturer’s warranty. We can quote for the whole job, from supply to commissioning.
Do you survey before quoting?
Yes, every time. We diagnose before we treat: the survey tells us what the job needs and how to do it, and the quote is based on that.
Do you have a 24/7 line?
Yes. For anything urgent, such as a system failing in a server room or water leaking from a unit, ring our 24/7 line and we will agree what happens next.