Greater London · Heat pump installation
Heat pump installation in World's End, Greater London
F-Gas certified and NICEIC approved, we cover World's End for MCS certified installation of air source heat pumps for heating and hot water, with the Boiler Upgrade Scheme grant applied for. A fixed price before any work starts, and a 24/7 emergency line.
- Ageing boilers that will need replacing
- Questions about the Boiler Upgrade Scheme
- Moving away from fossil-fuel heating
Air source heat pumps around World's End
About 59% of homes in World's End and the neighbourhoods around it were built before 1919, according to Valuation Office Agency council tax records, and the 2021 Census found about 82% of households live in flats. Older homes can lose heat faster, so a room-by-room heat loss calculation, and sometimes insulation or larger radiators, comes before sizing a heat pump. For flats, the first questions are where an outdoor unit could go, whether a cylinder fits and what the lease allows. For a London home, the outdoor unit position and the MCS noise check need careful planning.
If your home is near Imperial Wharf station and heated by a gas boiler, an air-to-water heat pump can replace it where the survey shows it suits.
World's End is about 2 miles south-east of Kensington, in Greater London. If you need air source heat pumps in World's End, it’s easy to get a fixed-price quote: please call us on 07833 053749 or write to us at info@aircondoctor.co.uk. Our area covers London and the South East, including World's End. Count every place we list in Greater London and you reach 764, with World's End on the list.
The closest recent job we can point to from World's End was on East Hill, Wandsworth (SW18), about 2 miles south: installing a Daikin wall-mounted unit in the open-plan living area.
Postcode districts we cover here: SW10, SW6 and SW3. Ann Lane, Lots Road and Avalon Road and the roads off them are all inside our area. Places around World's End that are also on our list: Little Chelsea (1 mile north), Chelsea Harbour (1 mile south), Walham Green (1 mile south-west), Sands End (1 mile south) and South Kensington (1 mile north). We also work in nearby towns such as London (4 miles east), City of Westminster (3 miles north-east), Marylebone (3 miles north-east) and St Pancras (4 miles north-east).
What’s near World's End
Around World's End, our work takes us to homes and businesses near The World's End pub, William Parnell Park and English National Ballet School and the streets around them. Other local landmarks include Natural History Museum Library and Archives (1 mile north) and Chelsea Academy (under half a mile south-west). For rail, the closest station is Imperial Wharf station, about 0.5 miles south of the centre. Nearby you will also find Kensington Arcade (1.4 miles north) and Chelsea Stadium Tour And Museum (under half a mile west). Open spaces near World's End include Battersea Park Lake and Campden Hill.
Air source heat pumps in World's End
Many air source heat pumps can be installed as permitted development in England, without a planning application. The conditions include an outdoor unit of no more than 1.5 m³ and compliance with MCS 020(a), and the unit can’t be used solely for cooling or sit within the curtilage of a listed building. We look at the planning position for your home during the survey. If you’re dealing with working out where a cylinder could go and checking whether planning permission is needed, we can help.
Homes in World's End are often flats and terraces, where outside space is limited, and that decides which kind of heat pump works. Air-to-water needs room for the outdoor unit and normally a cylinder, while an air-to-air system needs less space.
Refrigerant work is written up in the F-Gas records: what was done, the refrigerant type and any amount added or recovered. Keep the records with the manual and the warranty documents, ready for the next service or a warranty query.
- Where
- World's End (SW10, SW6, SW3)
- Region
- Greater London
- Response
- On the working day you ask
- Pricing
- Fixed-price quote after a site survey
- Typical price
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Credentials
- NICEIC and F-Gas, MCS
- Phone
- 07833 053749
- Page updated
- 30 October 2026
How it works
The visit has three parts, a bit like a doctor’s appointment: look, put right and sign off. First comes a careful look at the system or the space, then we do the work, and finally we test, record and explain. The middle part takes longest, which takes from a couple of days to around a week, depending on the system and how much of the heating changes. Before a visit in World's End, we ask where the van can stop and how we reach the outdoor unit.
- We start with your plans and the property.
- A survey covers heat loss, radiators, hot water and where the outdoor unit could sit.
- You get our view on the right type for the house, and on whether the Boiler Upgrade Scheme applies.
- The system is installed and connected to the controls.
- We commission it, complete the MCS certificate and show you how to use it.
Getting ready for the visit
- Let us know where we can park and unload
- Make sure we can reach the outdoor unit, or where it will go
- Plan for pets to be kept clear during the visit
Getting a quote
To help us quote: where the property is and what kind of building it is, pictures of the rooms or units, the make and model of any existing system and any symptoms, from error codes to drips. Once you have those, ring 07833 053749 or send an email.
Related advice
Do you need air source heat pumps in World's End?
Homes with electric heating sometimes look at heat pumps as an alternative. A survey shows whether a heat pump suits the property and what would need to change, and we explain the grant position for your home.
Look out for these signs:
- Deciding which kind of heat pump suits the home
- Checking whether planning permission is needed
- Questions about the Boiler Upgrade Scheme
Live in one of the older houses around St John's Church Centre? Expect the survey to look closely at heat loss and at the building’s planning status.
Before you book anyone
- Whether extra work needs your approval first
- Whether you get F-Gas records where refrigerant is involved
- Whether anyone has checked the property or the system first
Towns and villages near World's End
More services for World's End
Keeping the system healthy
Every system needs looking after, and most of it is easy. A few tips:
- Use the settings explained at handover
- Ask about the grant before you commit
- Check what your manufacturer’s warranty asks of you
We show you how to use the controls and explain how a heat pump works differently from a boiler. Heat pumps tend to work best running steadily rather than in short bursts, and we will explain the settings for your home.
Book a service every year. Your manufacturer’s warranty terms may say something about servicing.
Rented and managed buildings
We also work for facilities teams in offices, schools and public buildings across Greater London. Larger buildings can be done in stages to keep disruption down.
Portfolio owners often want one contractor and one number. Our area covers Greater London and the South East, so work at different addresses can be planned together and kept to a regular schedule.
World's End: your questions answered
Is planning permission needed for a heat pump in World's End?
It depends on the property. There’s a conservation area, the Sloane Stanley Conservation Area, close to central World's End. The permitted development rules for heat pumps leave out listed buildings and stop outdoor units going on road-facing walls or roofs in conservation areas. Anything outside the rules needs an application, and we raise it with the planning department at Kensington and Chelsea council, normally the authority for World's End first.
Can I get the Boiler Upgrade Scheme grant in World's End?
World's End is covered, as the scheme runs across England and Wales. The grant is £7,500 for an air source (air-to-water) heat pump and £2,500 for an air-to-air system that replaces the existing fossil-fuel heating. We hold MCS certification, so the application is ours to make for you.
How long will it take to install a heat pump?
It takes a few days for most air-to-water installations, with air-to-air systems often quicker. The cylinder, the radiators and the pipework make the biggest difference and the timing is set out with your quote.
Will my radiators work with a heat pump?
It depends on each radiator and the room it heats. Heat pumps run at lower flow temperatures, so radiators give out less heat, and the survey checks each one.
Can we book visits on a schedule?
Yes. Tell us what you have and how it’s used, and we’ll suggest a schedule with a fixed price. Leak checks required by the F-gas rules can be built in for larger systems.
Can I do any of the installation myself?
No, not the refrigerant side. The F-gas rules require certified companies and qualified engineers for it, and a new circuit is notifiable under Part P unless a registered electrician, such as a NICEIC approved contractor, does it.
Do you work on all makes?
The main ones, including Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. For new systems, we recommend a brand and model to suit the job and explain why.
A customer’s words
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager