Greater London · Heat pump installation
Heat pump installation in Sands End, Greater London
One call covers heat pump installation in Sands End: diagnosis, fixed price, work and sign-off. F-Gas certified, NICEIC approved and Checkatrade members.
- Comparing heat pump types
- Checking emitters for a heat pump
- Deciding on the outdoor unit position
About our air source heat pumps in Sands End
As an MCS certified installer, we fit air source heat pumps for homes in Sands End and the rest of Greater London. There are two kinds: air-to-water, which heats radiators or underfloor heating and your hot water, and air-to-air, which warms rooms through indoor units and can also cool. We help you work out which suits your home. The work covers air-to-air heat pumps, underfloor heating and hot water cylinders, and people most often call us about working out whether radiators need upsizing and questions about listed buildings or conservation areas.
In a flat in Sands End, the lease and the freeholder typically decide where a heat pump can go. Permitted development limits are different for flats, so we check the position before we design.
Any work on the refrigerant circuit is recorded: the work carried out, the refrigerant involved and the quantities. Keep the records with the manual and the warranty documents, as a manufacturer or a future engineer may ask to see them.
- Where
- Sands End (SW11, SW6, SW10)
- Region
- Greater London
- Price
- Fixed-price quote after a site survey
- Typical price
- £8,000–£16,000 before the grant, 0% VAT on homes
- Credentials
- NICEIC and F-Gas, MCS
- Replies
- Answered the same working day
- Telephone
- 07833 053749
- Reviewed
- 30 October 2026
Looking after your system
So the system stays in good health:
- Store the MCS certificate and warranty documents together
- Keep up with insulation and draught-proofing
- Read the manufacturer’s warranty terms for your brand
We show you how to use the controls and explain how a heat pump works differently from a boiler. Steady running suits a heat pump better than switching on and off, and we’ll explain the settings for your home.
Heat pumps prefer steady, low-temperature running as explained at handover.
Homes in Sands End and heat pumps
Census 2021 figures found about 83% of households live in flats. A flat may have no room for a hot water cylinder, and the freeholder typically has a say on the outdoor unit, which can tip the choice towards air-to-air. In London, outside space and the rules for flats often decide which kind of heat pump suits.
If your home is listed, like Carlyle's House about 0.9 miles north-east, listed building consent comes before any heat pump work.
Sands End is about 2 miles south-west of Brompton, in Greater London. Across the SW11 area, we cover air source heat pumps. Sands End is one of 764 places in Greater London we cover for homes and businesses.
Not far from Sands End, a recent job of ours was on East Hill, Wandsworth (SW18), about 1 mile south-west: installing a Daikin wall-mounted unit in the open-plan living area.
If your postcode is in SW11, SW6 and SW10, you are inside the area we cover. Local streets include York Road, Lots Road and Hyde Lane, and we cover them all. Close to Sands End, our area also takes in Chelsea Harbour (1 mile north), Walham Green (1 mile north-west), World's End (1 mile north), Clapham Junction (1 mile south-east) and Little Chelsea (1 mile north). Larger places within reach include London (4 miles north-east), City of Westminster (3 miles north), Marylebone (3 miles north-east) and St Pancras (5 miles north-east).
Around Sands End
Typical jobs here are in properties near Raven Inn, Chelsea Academy and Heatherley School of Fine Art and the streets around them. Other local landmarks include Natural History Museum Library and Archives (1.7 miles north) and Imperial Park (less than half a mile south-west). There’s a railway station in Sands End itself: Imperial Wharf station. Nearby you’ll also find Battersea General Hospital (0.7 miles east) and Southside Wandsworth (1.4 miles south-west). The countryside around Sands End includes Campden Hill and WWT London Wetland Centre.
Signs you need air source heat pumps in Sands End
An ageing boiler is often the moment people start thinking about a heat pump. Starting early leaves time for the survey, the design and any grant application, rather than rushing a replacement in winter.
Any of these is worth a proper look:
- Working out where a cylinder could go
- Checking whether planning permission is needed
- Comparing heat pump types
If your home is near Imperial Wharf station and heated by a gas boiler, an air-to-water heat pump can replace it where the survey shows it suits.
What your quote should include
- If the figure could change on the day
- Whether the quote shows VAT clearly
- Whether they hold F-Gas company certification, not just individual qualifications
Sands End questions
Can I have air conditioning in a flat in Sands End?
In many cases, yes, once the lease and the building’s rules are checked. We look at where the outdoor unit could go, such as a balcony, flat roof or rear wall, and write it up for the freeholder or agent.
Can I get the Boiler Upgrade Scheme grant in Sands End?
Sands End is covered, as the scheme runs across England and Wales. The grant is £7,500 for an air source (air-to-water) heat pump and £2,500 for an air-to-air system that replaces the existing fossil-fuel heating. The installer applies, and we’re MCS certified.
Who has to arrange F-Gas leak checks?
The operator of the equipment, working with qualified engineers. Systems below 5 tCO2e fall outside the set leak check intervals, while larger ones need checks at least every 12 months, or every 6 months from 50 tCO2e. We will work out which band applies to yours.
Do you cover Sands End?
Yes. Our area takes in London and the counties of the South East, Sands End included.
Will my radiators work with a heat pump?
Some radiators may be fine as they are, and some may need to be larger. Heat pumps run at lower flow temperatures, so radiators give out less heat so we check every radiator against the room’s heat loss.
Which accreditations do you hold?
F-Gas certified, NICEIC approved and MCS certified for heat pumps, and we are Checkatrade members. Our engineers also hold the individual F-gas qualifications needed to work on refrigerant.
Do you work on all makes?
Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries, Hitachi and others. For a new system, we suggest the make and model that suit the property and explain why.
How we price air source heat pumps
Before we fix a price, we need to know a few things. We look at:
- Access, including height, roofs and ladders
- What kind of system it is
- What we find on the survey or diagnosis
Every job is different, so each one gets its own fixed-price quote. The system, the access, the pipe routes and the parts involved all play a part.
Before you get in touch
There’s no need for technical detail. It helps if you can send:
- The rating plate or label on any existing unit
- Your consumer unit or fuse board
- A few photos of the room and the wall the unit is on, or will go on
If you need air source heat pumps in Sands End, give us a ring on 07833 053749, or email if that’s easier. Let us know the type of property and what you need, and send a few pictures if you can. We reply the same working day.
Places near Sands End
More services for Sands End
How it works
Each visit follows the same order: agree the plan on site, protect the area, carry out the job, check the system and explain it all to you. The visit itself takes a few days on site, depending on the cylinder, the radiators and the pipework involved. If a freeholder or agent needs to agree the work in Sands End, we can send them the details.
- We find out about your home and the heating you have now.
- Every room’s heat loss is worked out on site.
- We design the system, check the radiators and cylinder and look at the outdoor unit position.
- Cost, grant and VAT appear on one fixed-price quote.
- Then it’s fitted, commissioned and registered with MCS.
Before we arrive
- Arrange for someone to be there to let us in
- Dig out any previous service or F-Gas records
- Tell us about access, such as roof hatches, high walls or locked plant areas
Getting a price
Photos are the fastest route to a quote: the inside and outside of the property where the work is, plus the rating plate of any unit already there. Tell us the address and what you need, and simple jobs can often be priced without a visit.
Advice
From one of our customers
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager