Kent · Heat pump installation
Warren Street air source heat pumps
Looking for air source heat pumps in Warren Street? We diagnose first, fix the price and book the work around you, finishing with proper records.
- No space for a hot water cylinder
- Moving away from fossil-fuel heating
- Planning and permitted development questions
What air conditioning won’t do
In fairness, there are a few things this work won’t fix:
- Gas boiler work, such as disconnecting the old boiler, which needs a Gas Safe registered engineer
- Planning approval where permitted development doesn’t apply
- Improving the building’s insulation
If in doubt, call us on 07833 053749 or fill in the contact form and we will say what we think before you book.
Where we work
- Radiator systems
- Air-to-water heat pumps
- Underfloor heating
- Air-to-air heat pumps
- Hot water cylinders
- Homes heated by oil, LPG or gas
Air source heat pumps for homes and businesses in Warren Street
In England, an air source heat pump on a house can often go in under permitted development rights. Conditions include a maximum outdoor unit size of 1.5 m³, compliance with MCS 020(a), use for more than cooling alone and a site outside the curtilage of a listed building. We check the rules for your property as part of the survey. If you’re dealing with questions about listed buildings or conservation areas and working out where a cylinder could go, we can sort it out.
For a home around Warren Street that is off mains gas and heated by oil or LPG, an extra £1,500 is available through the Boiler Upgrade Scheme until March 2027, on top of the £7,500.
The records are your system’s health record: what was fitted or found, what was done and when. It makes the next visit quicker and any warranty question simpler and it’s worth keeping safe.
- Where
- Warren Street (ME17)
- Wider area
- Kent
- Guide price
- £8,000–£16,000 before the grant, 0% VAT on homes
- Accreditations
- NICEIC approved, F-Gas certified, MCS
- Response
- On the working day you ask
- Quote
- Fixed, in writing
- Call
- 07833 053749
- Checked
- 30 October 2026
How the visit works
Everything the job needs comes with us, from tools and test equipment to ladders and dust sheets. You only need to give us clear access to the units, or their planned positions, and to the fuse board. On site, the work takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. A few photos help us make the most of a visit to Warren Street.
- We talk through your home, your current heating and what you want from a heat pump.
- We survey the home room by room for heat loss, and check the emitters, hot water and outdoor unit position.
- You get a fixed-price quote, with any grant you are eligible for and the VAT explained.
- We fit the outdoor unit and connect it to the heating, hot water and controls.
- Commissioning, MCS certification and a handover of the controls finish the job.
Getting ready for the visit
- Make sure we can reach the consumer unit or fuse board
- Mention any managing agent or landlord rules we need to follow
- Mention any parking restrictions near the property
Getting a quote
Want a quote for air source heat pumps? Please call 07833 053749 or email us with a few details about the property. We’ll explain what we’d recommend and why, then send a fixed-price quote before you commit to anything.
Read more
For landlords and property managers
Managing agents often deal with us directly. Tell us the property, the work and the access arrangements, and we will send a fixed-price quote.
The F-gas rules share responsibility for leak checking between the equipment’s operator and the service technicians. Where a building is let or managed, the lease or contract should make clear who looks after the system, and we can work for either side.
Also near Warren Street
Also in Warren Street
Safe owner checks
Leave the units and pipework where they are. Disconnecting a system means dealing with refrigerant, which only a qualified engineer can do, and the electrics need care too. Ask us to quote for a move instead.
Owner care supports servicing; it does not replace it. Clean filters and a clear outdoor unit help the system run as it should, but the inside of the units, the refrigerant and the electrics still need a qualified engineer.
Common questions in Warren Street
Do you cover smaller places like Warren Street?
Yes, smaller places are covered as well as towns. We are based in East Grinstead and plan each visit so the job can be finished in one trip where possible.
Do you cover Warren Street for air source heat pumps?
Yes. Warren Street is one of the places we cover. To start, phone 07833 053749 or send an email with a few photos.
Do I need new radiators for a heat pump?
It varies from room to room. We check them all during the survey, so the quote covers any changes.
Why use an F-Gas certified company?
Certification shows a business is approved to work on systems that hold F gas refrigerant. In Great Britain, that certification is a legal requirement, not an optional extra, and we hold it.
Is there a survey before the work?
Yes. For simple jobs, pictures and a few details can be enough, while larger systems and faults that need testing are seen on site.
How much time does a heat pump install need?
It takes a few days for most air-to-water installations, with air-to-air systems often quicker. How much of the heating changes decides most of the time and the timing is set out with your quote.
Do you work on all makes?
The main ones, including Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. For new systems, we recommend a brand and model to suit the job and tell you why.
Homes in Warren Street and heat pumps
About 41 miles out from central London, Warren Street is part of the South East area we work across. The Valuation Office Agency’s council tax figures show about 32% of homes in Warren Street and the neighbourhoods around it were built in 2000 or later, and about 71% of households live in detached or semi-detached houses, according to the 2021 Census. Newer homes typically lose less heat, which tends to suit a heat pump well. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.
A heat loss calculation decides the size of heat pump your home needs. Historic houses such as Belmont House and Gardens, about 4.1 miles north-east, are a reminder that listed homes need consent before a heat pump goes in.
Warren Street is about 7 miles south of Sittingbourne, in Kent. From the centre of Warren Street to the outskirts, we cover air source heat pumps, from a single room to a whole building. Warren Street is one of 922 towns, villages and districts in Kent we cover for homes and businesses. For properties nearby, see our Bromley page (34 miles or so).
If you need air source heat pumps at a property on Payden Street, Slade Road and Warren Street or anywhere close by, we can help. Here we cover the ME17 postcode area. Other places close to Warren Street include Payden Street (1 mile north-west), Cold Harbour (1 mile south-east), Woodside Green (1 mile west), West Street (2 miles west) and Wichling (2 miles north). Further out, we also cover Maidstone (10 miles west), Ashford (9 miles south-east), Canterbury (14 miles east) and Sittingbourne (7 miles north).
Near you in Warren Street
In Warren Street, that means homes and buildings near Spuckles and Kennelling Woods and The Harrow pub, among other places. The nearest railway station is Lenham station, roughly 2.4 miles west of the centre. Well-known places in the area include Newnham Castle (3.3 miles north-east).
A customer’s words
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager