Oxfordshire · Heat pump installation
Air Source Heat Pumps in Stanton Harcourt
F-Gas certified and NICEIC approved, we cover Stanton Harcourt for air source heat pumps. A fixed price before any work starts, and a 24/7 emergency line.
- Checking eligibility for a heat pump grant
- Plans to switch to electric heating with a heat pump
- Ageing boilers that will need replacing
Homes in Stanton Harcourt and heat pumps
The centre of Stanton Harcourt lies within the Stanton Harcourt and Sutton Conservation Area. Listed buildings are part of the picture here: about 48 within half a mile of the centre, such as Church of St Michael (grade I). Where a home is affected, the outdoor unit position is settled with the local planning authority (usually West Oxfordshire council) before the heat pump design is finished. The Valuation Office Agency’s council tax figures date about 40% of homes across Stanton Harcourt and its surrounding area to the post-war years, 1945 to 1972, and the 2021 Census found about 71% of households in detached or semi-detached houses. Whether the walls and loft have been insulated makes a real difference to the heat pump size for homes of that period. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.
If your home is one of the older properties near Church of St Michael, the survey checks whether it’s listed or in a conservation area before the outdoor unit position is chosen. Appleton Manor, roughly 3.2 miles south-east, is a reminder to check your home’s listing status: permitted development doesn’t cover listed buildings.
Stanton Harcourt is about 5 miles south-east of Witney, in Oxfordshire. Anywhere in OX29, our engineers can take on air source heat pumps. Our Oxfordshire coverage runs to 443 places, and Stanton Harcourt is one of them. There’s also a page for Guildford, roughly 50 miles from Stanton Harcourt.
Every address in OX29 is covered, from the main roads to the quietest streets. You’ll find streets such as The Green, Roman Crescent and Main Road, and we cover them all. Nearby, we also cover air source heat pumps in Standlake (2 miles south-west), Hardwick (2 miles west), Brighthampton (2 miles south-west), South Leigh (2 miles north-west) and High Cogges (3 miles north-west). Within a short drive, we also cover Oxford (7 miles east), Didcot (12 miles south-east), Bicester (15 miles north-east) and Abingdon-on-Thames (7 miles south-east).
Near you in Stanton Harcourt
Locally, jobs take us to houses, flats and workplaces close to Bartholomew School and The Harcourt Arms Public House, among other places. Other landmarks nearby include Hinton Waldrist Castle (4.7 miles south-west). Open spaces near Stanton Harcourt include Cumnor Hill and Lashford Lane Fen.
About our air source heat pumps in Stanton Harcourt
Heat pumps run at lower flow temperatures than most boilers which means some radiators may need upsizing. We check each radiator against the room’s heat loss, and the quote sets it out. If you are dealing with finding a place for the outdoor unit and checking emitters for a heat pump, we can help.
In a place like Stanton Harcourt, some homes are listed, and permitted development doesn’t cover listed buildings, so we check consent first.
Whatever the visit, you get a written record: commissioning details for an installation, a fault and repair note for a repair, or a record of the service. File it with the manual so it’s to hand next time.
- Location
- Stanton Harcourt (OX29)
- Region
- Oxfordshire
- Quote
- Fixed-price quote after a site survey
- Approvals
- NICEIC and F-Gas, MCS
- Guide price
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Phone
- 07833 053749
- Page updated
- 30 October 2026
Managing agents and facilities teams in Stanton Harcourt
Where a tenant occupies the property but the landlord owns the system, it’s worth checking the agreement for who looks after the system. We’re happy to deal with either side, and the paperwork can go to both.
Portfolio owners often want one contractor and one number. We work across London and the South East, so a run of properties can go into one programme and kept to a regular schedule.
Also near Stanton Harcourt
More services for Stanton Harcourt
Your questions about air source heat pumps in Stanton Harcourt
Can I get the Boiler Upgrade Scheme grant in Stanton Harcourt?
Stanton Harcourt is in England, where the Boiler Upgrade Scheme runs. For an air-to-water heat pump the amount is £7,500; an air-to-air system can get £2,500 if it replaces the fossil-fuel heating outright, meets the home’s full heating demand and isn’t an add-on to a boiler. As an MCS certified installer, we apply for it on your behalf.
Will you come out to Stanton Harcourt?
Yes, and the size of the place makes no difference to how we work. Visits to smaller places are planned so the engineer arrives with what the job needs.
Do you work on systems someone else installed?
Yes. Systems fitted by other companies are fine from all the leading brands. Tell us the make and model and send any paperwork you have.
Do you look at the job first?
Yes. Photos often do the job for simple work, while larger systems and faults that need testing are seen on site.
Do you work for landlords and businesses?
Yes. We work for homeowners, landlords, letting and managing agents, and businesses of every size in Stanton Harcourt and across Oxfordshire. Let us know who the records should go to.
Will I get records for the system?
Yes. It’s the record a manufacturer or the next engineer will ask to see: a dated note of the work, with refrigerant details where they apply.
Whose job is it to check the system for leaks?
The operator of the equipment, working with qualified engineers. Larger systems need regular checks: at least every 12 months from 5 tCO2e and every 6 months from 50 tCO2e. We can tell you which band your system falls into.
Fixed-price quotes for air source heat pumps in Stanton Harcourt
Your quote is based on your property. We take into account:
- Whether we need access equipment for high-level work
- Which make and model is being fitted or worked on
- A single visit or a regular plan
Typical ranges are on our prices page, but your price depends on the job in front of us. Call for a fixed-price quote, and we’ll explain what it covers.
What we need to know
Simple jobs can often be priced from pictures and some basics. Send what you can of the following:
- Photos showing the indoor unit and the space around it
- A close-up of the unit’s label showing the model number
- The remote or wall controller showing any error
If you need air source heat pumps in Stanton Harcourt, call us on 07833 053749, or email if that’s easier. Let us know the type of property and what you need, plus some photos if they’re to hand. We reply the same working day.
Looking after it afterwards
Systems last better with the right care. Here’s what we suggest:
- Keep radiators clear
- Use the settings explained at handover
- Ask about the grant before you commit
After commissioning, the installation is registered under MCS and you receive the certificate. Keep it with the manufacturer’s paperwork, as you may need it later.
Keep the outdoor unit clear of leaves, plants and stored items. It needs good airflow to collect heat from outside, so keep it clear all year.
How it works
We book the visit for a day and time that suit you, and we let you know if plans need to move. On arrival, the engineer compares the job with the survey, your photos or the details you gave us. If something is different, we talk it through with you before carrying on. From there, the work takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. Somewhere like Stanton Harcourt, it helps to know about lanes, gates and where to park.
- It starts with a conversation about the home, the existing heating and your plans.
- We survey the home room by room for heat loss, and check the emitters, hot water and outdoor unit position.
- You get a fixed-price quote, with any grant you are eligible for and the VAT explained.
- Fitting day: the outdoor unit is placed, the indoor side connected and the controls set up.
- Once it’s running correctly, the MCS certificate is issued and we show you the settings.
Preparing for the visit
- Make sure someone can let us in at the agreed time
- Tell us about any building rules, permits or sign-in
- Give us access to the outside wall, roof or yard where the outdoor unit sits
How to get a quote
To help us quote: where the property is and what kind of building it is, photos of the rooms or units, the make and model of any existing system and any symptoms, from error codes to drips. Once you have those, ring us on 07833 053749 or write to us at info@aircondoctor.co.uk.
Read more
A customer’s words
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath