Oxfordshire · Heat pump installation
Heat pump installation in Standlake, Oxfordshire
F-Gas certified and NICEIC approved, we cover Standlake for heat pump installation. Fixed-price quotes and a 24/7 emergency line.
- Questions about where the outdoor unit can go
- Planning and permitted development questions
- Ageing boilers that will need replacing
What the work involves, system by system
Air-to-water heat pumps
Air-to-water systems work at lower temperatures than boilers, so radiator sizes matter.
VAT on heat pumps
Installing an air source heat pump in a home is zero-rated until 31 March 2027, then 5%, under HMRC Notice 708/6. Businesses pay the standard rate.
Air source heat pumps in Standlake, done properly
Installing an air source heat pump in a home is zero-rated for VAT until 31 March 2027, then 5%. That follows HMRC Notice 708/6, and it doesn’t apply to businesses, and for air-to-air systems we confirm the VAT on your quote. This is general information, not tax advice. If the problem is choosing between air-to-water and air-to-air and plans to switch to electric heating with a heat pump, we can sort it out.
Older and listed homes in villages like Standlake need extra care, because permitted development does not apply within the grounds of a listed building, so consent comes first.
Each manufacturer sets its own warranty period. For instance, Daikin’s standard warranty on split air conditioning is 2 years, and its longer extensions apply to its air-to-water units only. For any other brand, we explain the manufacturer’s terms on your quote.
- Where
- Standlake (OX29)
- Region
- Oxfordshire
- Guide price
- £8,000–£16,000 (0% VAT on homes), before the grant
- Price
- A fixed-price quote up front
- Approvals
- F-Gas certified, NICEIC approved, MCS
- Call
- 07833 053749
- Updated
- 30 October 2026
How it works
Think of the visit in three stages: diagnose, treat and sign off. First comes a careful look at the system or the space, then the work itself, and finally everything is tested, recorded and explained. The middle part takes longest, which takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. Photos of the existing unit help with repairs and servicing in Standlake.
- First we talk through the property and the current system.
- A heat loss survey is carried out, room by room.
- We design the system, check the radiators and cylinder and look at the outdoor unit position.
- You get a fixed price, with any grant and the VAT set out.
- Installation, commissioning and MCS registration complete the job.
Before we arrive
- Arrange for someone to be there to let us in
- Clear a path to the units and the space around them
- Tell us about parking and loading
Getting a quote
Some jobs can be priced from pictures, while others need a survey. Bigger systems, commercial sites and awkward pipe routes are normally surveyed on site. Either way, you get a fixed price before any work is booked.
Read more
When something else is needed
Before you book, it helps to know what’s not included:
- Planning decisions, which rest with the council
- Disconnecting or servicing a gas boiler
- Formal advice on VAT for your situation
Not sure which it is? You can phone us on 07833 053749 or send an email and we’ll tell you honestly.
What we work on in Standlake
- Air-to-water heat pumps
- Hot water cylinders
- Homes heated by oil, LPG or gas
- Radiator systems
- Underfloor heating
- Air-to-air heat pumps
Questions from Standlake
Can I get the Boiler Upgrade Scheme grant in Standlake?
Standlake is covered, as the scheme runs across England and Wales. It gives £7,500 towards an air-to-water or ground source heat pump, or £2,500 towards an air-to-air heat pump that replaces the fossil-fuel heating and meets the whole home’s heating need. We hold MCS certification, so the application is ours to make for you.
Is planning permission needed for a heat pump in Standlake?
There’s no single answer: the building and the outdoor unit position decide it. Historic England lists about 27 buildings and structures within half a mile of the centre of Standlake. Heat pumps on houses are often permitted development, but listed buildings need consent and conservation areas restrict outdoor units facing a road. Where it’s needed, we check with the local planning authority (for Standlake, usually West Oxfordshire council).
Do you offer emergency call-outs?
Yes, day and night. When you call, tell us the make, what’s happening and any error code, and we will talk you through the next steps.
How long does a heat pump installation take?
As a guide, it takes a few days for most air-to-water installations, with air-to-air systems often quicker. The programme is planned to keep time without heating short, and we explain it in advance.
Can I fit air conditioning or a heat pump myself?
Not the refrigerant work. Under the F-gas rules, it must be done by qualified engineers from a certified company, and a new electrical circuit is notifiable building work unless a registered competent person does it.
Who is responsible for leak checks?
The operator of the equipment, working with qualified engineers. Larger systems need regular checks: at least every 12 months from 5 tCO2e and every 6 months from 50 tCO2e. We can tell you which band your system falls into.
How do you keep the place clean during the work?
Protection goes down first: dust sheets over floors and anything close to the work. Any drilling is agreed with you first, and we clear up the dust and offcuts when we finish.
Air source heat pumps in Standlake: the local picture
Valuation Office Agency council tax records show about 37% of homes in the Standlake area were built in 2000 or later, and about 86% of households live in detached or semi-detached houses, according to the last census (2021). Newer homes usually lose less heat, which tends to suit a heat pump well. Detached and semi-detached houses usually have room for the outdoor unit and a cylinder.
Period properties close to St Giles' Church can suit a heat pump, though insulation and any heritage protection are checked first. Longworth House lies about 2.5 miles south. Owners of listed homes need consent before a heat pump is fitted, so it’s one of our first questions.
Standlake is about 5 miles south-east of Witney, in Oxfordshire. Wherever you are in the OX29 postcode area, we cover air source heat pumps. We cover 443 places across Oxfordshire, large and small. The nearest of our city pages is Guildford, around 50 miles from Standlake.
Our working area takes in OX29. Our engineers work on High Street, Manor Crescent and Horns Way and nearby roads. Places around Standlake that are also on our list: Brighthampton (1 mile west), Hardwick (2 miles north-west), Stanton Harcourt (2 miles north-east), South Leigh (3 miles north) and Ducklington (4 miles north-west). Further out, we also cover Oxford (9 miles east), Didcot (11 miles south-east), Abingdon-on-Thames (7 miles south-east) and Witney (5 miles north-west).
Near you in Standlake
Typical jobs here are in properties near The Bell Inn and Mulberry Bush School and the streets around them. Well-known places in the area include Hinton Waldrist Castle (2.9 miles south-west). The countryside around Standlake includes Hitchcopse Pit and Cumnor Hill.
Nearby places to Standlake
What else we do in Standlake
Keeping the system healthy
Aftercare is straightforward, and it makes the next visit easier:
- Look at insulation alongside the heat pump
- Let the heat pump run steadily, as set up at handover
- Read the manufacturer’s warranty terms for your brand
Once commissioned, we register the installation with MCS and give you the certificate. File it with the warranty documents, as you may need it later.
Leave space around the outdoor unit. It needs good airflow to collect heat from outside, so keep it clear all year.
From one of our customers
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead