Kent · Heat pump installation

Heat pump installation in Sandling, Kent

Air source heat pumps in Sandling from an F-Gas certified company, with warranty terms explained brand by brand. We reply to enquiries the same working day.

  • Ageing boilers that will need replacing
  • Deciding which kind of heat pump suits the home
  • Deciding on the outdoor unit position

Air source heat pumps in Sandling and nearby

Air source heat pumps for homes and businesses in Sandling

For an air-to-water heat pump, the price is £8,000–£16,000 (0% VAT on homes), before the grant. In England and Wales, the Boiler Upgrade Scheme offers a £7,500 grant towards an eligible air-to-water installation and the installer makes the application. Not every home qualifies, so we check eligibility before you commit. If the problem is deciding which kind of heat pump suits the home and deciding on the outdoor unit position, we can sort it out.

For a home around Sandling that’s off mains gas and heated by oil or LPG, the Boiler Upgrade Scheme adds an extra £1,500 until March 2027 for an air source or ground source heat pump, on top of the £7,500.

The records are your system’s health record: what was fitted or found, what was done and when. It makes the next visit quicker and any warranty question simpler and it’s worth keeping safe.

Location
Sandling (ME14, ME16, ME20)
Region
Kent
Price
A fixed price before any work starts
Prices
£8,000–£16,000 (0% VAT on homes), before the grant
Certified
F-Gas certified, NICEIC approved, MCS
Call
07833 053749
Last updated
30 October 2026

Heat pumps in Sandling: local notes

About 60% of households live in detached or semi-detached houses, according to the 2021 Census. Detached and semi-detached houses typically have room for the outdoor unit and a cylinder.

If your home is one of the older properties near St Paul's Church, the survey checks whether it’s listed or in a conservation area before the outdoor unit position is chosen. Stoneacre, roughly 4.2 miles south-east, is a reminder to check your home’s listing status: permitted development doesn’t cover listed buildings.

Sandling is about 1 mile north-west of Foley Park, in Kent. Sandling gets the same approach as every job we take on: a look at the job first, a fixed-price quote and written records at the end. Count every place we list in Kent and you reach 922, with Sandling on the list. The nearest of our city pages is Bromley, around 23 miles from Sandling.

Main roads around Sandling include the M20, so getting to you is simple. Whether you’re on Lock Lane, Grange Lane and Tyland Lane or anywhere close by, our engineers can take on the work. If you’re just outside Sandling, we cover Abbey Gate (1 mile north), Ringlestone (1 mile south), Harbourland (1 mile east), Penenden Heath (1 mile south-east) and Foley Park (1 mile south-east). We also work in nearby towns such as Sittingbourne (10 miles east), Sevenoaks (14 miles west), Gravesend (11 miles north-west) and Tonbridge (12 miles south-west).

Local landmarks in Sandling

Typical jobs here are in properties near The Yew Tree pub, Tyland Barn and The Maplesden Noakes School, among other places. For rail, the closest station is Maidstone East station, roughly 1.4 miles south of the centre. Other landmarks nearby include KIMS hospital (2 miles south-east) and Allington Castle (under half a mile south-west). Not far away are Burham Down and Boxley Hills.

Map of Sandling © OpenStreetMap contributors

When something else is needed

An honest diagnosis matters more to us than a booking, so here’s what air source heat pumps will not do:

  • Formal advice on VAT for your situation
  • Planning approval where permitted development does not apply
  • Grants for hybrid systems or replacements of low-carbon systems

Not sure which it is? You can call 07833 053749 or use the quote form and we’ll tell you honestly.

Parts of the system we cover

  • Hot water cylinders
  • Air-to-water heat pumps
  • Homes heated by oil, LPG or gas
  • Air-to-air heat pumps
  • Underfloor heating
  • Radiator systems

What affects the cost of air source heat pumps

Before we fix a price, we need to know a few things. We check:

  • What we find on the survey or diagnosis
  • How easy the units are to reach
  • Whether the existing supply is suitable

Several rooms, units or sites on one quote can make for a more efficient booking. Mention every unit or room you need covered, and you’ll get one fixed price.

Before you get in touch

To speed up the quote, please include:

  • The rating plate or label on any existing unit
  • Where the outdoor unit is, or where you’d like it
  • The paperwork from the last service, if you have it

Some jobs can be priced from photos, while others need a survey. Multi-room systems, commercial buildings and anything with a long or hidden pipe route are normally surveyed first. Either way, the quote is fixed before anything goes ahead.

Sandling: your questions answered

Is a heat pump in Sandling permitted development?

The answer turns on the property and where the outdoor unit would sit. Historic England lists about 14 buildings and structures within half a mile of the centre of Sandling. The permitted development rules for heat pumps leave out listed buildings and stop outdoor units going on road-facing walls or roofs in conservation areas. Anything outside the rules needs an application, and we raise it with Maidstone council, which is usually the planning authority for Sandling first.

Is the heat pump grant available in Sandling?

Sandling is covered, as the scheme runs across England and Wales. It gives £7,500 towards an air-to-water or ground source heat pump, or £2,500 towards an air-to-air heat pump that replaces the fossil-fuel heating and meets the whole home’s heating need. The installer applies, and we’re MCS certified.

How quickly will you reply?

You’ll hear from us the same working day. If it’s an emergency, ring the 24/7 line instead.

Do I need new radiators for a heat pump?

Some radiators may be fine as they are, and some may need to be larger. At the lower temperatures a heat pump uses, radiators need more surface so we check every radiator against the room’s heat loss.

How do you keep the place clean during the work?

Protection goes down first: dust sheets over floors and anything close to the work. Any drilling is agreed with you first, and we clear up the dust and offcuts when we finish.

Should I choose air-to-water or air-to-air?

Air-to-water heats radiators or underfloor heating and hot water; air-to-air heats rooms through indoor units and can cool them. With air-to-air, hot water needs another source and the survey helps decide.

Can you set up regular servicing?

Yes. Maintenance contracts are part of what we do, set at the interval the system and the manufacturer’s terms need. Every visit is recorded, with F-Gas records where refrigerant work is involved.

The process

On the day, we arrive at the time agreed with you and run through the plan before anything else. Floors and furniture near the work are covered with dust sheets, and anything electrical is made safe before work starts. The work itself takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. For a village like Sandling, tell us about narrow lanes, gates and parking when you book.

  1. You tell us about the home and what you want from a heat pump.
  2. A survey covers heat loss, radiators, hot water and where the outdoor unit could sit.
  3. We explain which type of heat pump suits the home and whether a grant could apply.
  4. We install the heat pump and connect it up.
  5. We commission it, complete the MCS certificate and show you how to use it.

Getting ready for the visit

  • Name a contact who can meet us at the agreed time
  • Let us know if the units are on a roof, a high wall or in a locked area
  • Keep pets out of the rooms we’re working in

Get a fixed-price quote

To help us quote: the address and the type of property, photos of the rooms or units, the make and model of any existing system and any symptoms, from error codes to drips. Once you have those, phone 07833 053749 or fill in the contact form.

Ask for a quote

Advice

Managing agents and facilities teams in Sandling

We also work for facilities teams in offices, schools and public buildings in Sandling and across Kent. Work can be phased by floor, zone or building around the people who use them.

Landlords, letting agents and managing agents book us, not only the people who live or work in the property. Let us know who will give us access and who the records should go to, and we’ll keep everyone informed.

What a customer said

“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”

Sarah M., East Grinstead

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead