Kent · Heat pump installation
Heat pump installers in Abbey Gate
Looking for air source heat pumps in Abbey Gate? We diagnose first, fix the price and book the work around you, then sign it off with written records.
- Deciding which kind of heat pump suits the home
- Replacing a combi boiler with a heat pump
- Questions about the Boiler Upgrade Scheme
Abbey Gate: your questions answered
Is Abbey Gate within the area you cover?
Yes, smaller places are covered as well as towns. Visits to smaller places are planned so the engineer arrives with what the job needs.
Is the heat pump grant available in Abbey Gate?
Yes, if the home and the heat pump meet the scheme’s rules: Abbey Gate is in England, where it applies. The grant is £7,500 for an air source (air-to-water) heat pump and £2,500 for an air-to-air system that replaces the existing fossil-fuel heating. You do not apply yourself: the MCS certified installer does, which is us.
How long does a heat pump installation take?
It takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. How much of the heating changes decides most of the time, and we confirm the timing with your quote.
Should I choose air-to-water or air-to-air?
It depends on your home, your heating and whether you want cooling. The grant is £7,500 for eligible air-to-water systems and £2,500 for air-to-air in limited cases, and we set out the options after the survey.
Do I need planning permission for a heat pump?
That depends on your home and the unit’s position. Flats have tighter limits, conservation areas add conditions, and Article 4 directions can remove rights, so we check during the survey.
Who has to arrange F-Gas leak checks?
Whoever operates the equipment, together with the technicians who service it. Systems below 5 tCO2e fall outside the set leak check intervals, while larger ones need checks at least every 12 months, or every 6 months from 50 tCO2e. We will work out which band applies to yours.
Do you provide F-Gas records?
Yes, always. New installations come with commissioning details, F-Gas records and warranty information, and repairs and services get a record of the work.
Air source heat pumps in Abbey Gate, done properly
Air source heat pumps collect heat from outdoor air and bring it inside with electricity running the compressor and fans. The technology is close to air conditioning, which is why we install both and the Energy Saving Trust notes that air-to-air heat pumps are sometimes referred to as air conditioning. If you’re dealing with questions about listed buildings or conservation areas and deciding on the outdoor unit position, we can help.
Homes around Abbey Gate usually have room outside for a heat pump, so the design focuses on heat loss and radiators.
Whatever the visit, you get a written record: commissioning details and F-Gas records for a new system, a note of the fault and the fix for a repair, or a service record. Keep it with the system’s paperwork so it’s to hand next time.
- Place
- Abbey Gate (ME14, ME16)
- Wider area
- Kent
- Approvals
- NICEIC and F-Gas, MCS
- Quote
- A fixed price before we start
- Price guide
- £8,000–£16,000 before the grant, 0% VAT on homes
- Call
- 07833 053749
- Last updated
- 30 October 2026
For landlords and property managers
We regularly work with managing agents. Tell us the property, the work and the access arrangements and we will come back with a fixed-price quote.
Under the GB F-gas rules, responsibility for leak checks is shared between whoever operates the equipment and the engineers who work on it. In a let or managed building, it’s worth agreeing who that operator is, and we can work for either side.
Nearby places to Abbey Gate
Also in Abbey Gate
The process
Everything the job needs comes with us, from tools and test equipment to ladders and dust sheets. All we ask is clear access to the units, or to where they’ll go, and to the consumer unit. On site, the work takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. Photos of the room and the outside of the property help us plan a visit to Abbey Gate.
- We talk through your home, your current heating and what you want from a heat pump.
- We survey the home room by room for heat loss, and check the emitters, hot water and outdoor unit position.
- We send a fixed-price quote that shows the equipment, the grant position and the VAT.
- We fit the outdoor unit and connect it to the heating, hot water and controls.
- The system is commissioned and registered under MCS, and we show you how to use it.
Before we arrive
- Make sure we can reach the outdoor unit, or where it will go
- Clear a path to the units and the space around them
- Clear access to the fuse board
How to get a quote
To get a fixed-price quote, give us a ring on 07833 053749 or drop us a line with the address and a few details about the rooms or units involved. Photos help a lot. You’ll hear back from us the same working day.
Read more
Looking after your system
Think of this as the after-treatment advice, short and simple:
- Store the MCS certificate and warranty documents together
- Seal draughts where you can
- Read the manufacturer’s warranty terms for your brand
In cold, damp weather the outdoor unit runs a defrost cycle from time to time. You might see steam or hear the unit change note and it’s part of how the system works.
Heat pumps prefer steady, low-temperature running as explained at handover.
Heat pumps in Abbey Gate: local notes
On the National Heritage List, around 14 entries fall within 0.5 miles of the middle of Abbey Gate; St Andrew's Chapel (grade II*) is one. Where a home is affected, the outdoor unit position is settled with the local planning authority (usually Maidstone council) before the heat pump design is finished. The 2021 Census found about 60% of households in detached or semi-detached houses. Detached and semi-detached houses usually have room for the outdoor unit and a cylinder.
If your home is one of the older properties near St Paul's Church, the survey checks whether it’s listed or in a conservation area before the outdoor unit position is chosen. Stoneacre, roughly 4.2 miles south-east, is a reminder to check your home’s listing status: permitted development doesn’t cover listed buildings.
Abbey Gate is about 1 mile north-west of Foley Park, in Kent. Whatever kind of property you have in Abbey Gate, our engineers can help with air source heat pumps. You’ll hear back from us the same working day and our emergency line runs 24/7. We cover 922 places across Kent, from busy centres to quieter spots. Bromley, roughly 23 miles off, has its own page on this site.
If your postcode is in ME14 and ME16, we can take the job on. Being close to the M20, Abbey Gate is easy for our engineers to reach for visits of every kind. We also cover the places around Abbey Gate: Sandling (1 mile north), Ringlestone (1 mile south), Harbourland (1 mile east), Penenden Heath (1 mile south-east) and Foley Park (1 mile south-east). Within a short drive, we also cover Sittingbourne (10 miles east), Sevenoaks (14 miles west), Gravesend (11 miles north-west) and Tonbridge (12 miles south-west).
Near you in Abbey Gate
Around Abbey Gate, our work takes us to homes and businesses near The Maplesden Noakes School, The Yew Tree pub and Tyland Barn, among other places. For rail, the closest station is Maidstone East station, about 1.4 miles south of the centre. Other landmarks nearby include Allington Castle (within half a mile south-west) and Fremlin Walk (1.6 miles south). Not far away are Boxley Hills and Burham Down.
Different systems, different jobs
Hot water cylinders
The cylinder size depends on how much hot water the household uses.
VAT on heat pumps
Installing an air source heat pump in a home is zero-rated until 31 March 2027, then 5%, under HMRC Notice 708/6. Businesses pay the standard rate.
What a customer said
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager