Kent · Heat pump installation
Heat pump installation in Ripple, Kent
One call covers MCS certified installation of air source heat pumps for heating and hot water, with the Boiler Upgrade Scheme grant applied for in Ripple: diagnosis, fixed price, work and sign-off. An F-Gas certified company, NICEIC approved, on Checkatrade.
- Checking emitters for a heat pump
- Choosing between air-to-water and air-to-air
- Wanting to stop using oil, LPG or gas for heating
Owner checks or an engineer?
There are a few things you can safely do yourself: keeping the outdoor unit clear, checking the mode and set temperature, and the routine cleaning in the manual. Anything inside the units, the electrics and the refrigerant is engineer’s work.
On air conditioning, the filters in the indoor unit are normally the one part owners can clean where the manufacturer’s manual explains how. They come out, get a gentle clean and go back only when they’re dry. On a heat pump, the equivalent is keeping the outdoor unit clear and checking the controls.
Air source heat pumps for homes and businesses in Ripple
Many air source heat pumps can be installed as permitted development in England, without a planning application. Conditions include a maximum outdoor unit size of 1.5 m³, compliance with MCS 020(a), use for more than cooling alone and a site outside the curtilage of a listed building. We look at the planning position for your home during the survey. The work covers air-to-air heat pumps, radiator systems and hot water cylinders, and people most often call us about questions about where the outdoor unit can go and comparing heat pump types.
Space for an outdoor unit is rarely an issue near Ripple, so the design comes down to heat loss, radiators and hot water.
Some manufacturers make regular servicing by a qualified engineer a condition of their warranty. Where yours does, a regular service with us keeps that side in order, and every service is written up.
- Where
- Ripple (CT14)
- Wider area
- Kent
- Pricing
- Fixed, in writing
- Credentials
- NICEIC approved, F-Gas certified, MCS
- Costs
- £8,000–£16,000 (0% VAT on homes), before the grant
- Phone
- 07833 053749
- Updated
- 30 October 2026
What we do, step by step
Testing is the last part of the visit wherever the system can be switched on. Then we explain what was done and answer your questions, and anything that needs attention later is pointed out. All told, the work takes from a couple of days to around a week, depending on the system and how much of the heating changes. For a village like Ripple, tell us about narrow lanes, gates and parking when you book.
- First we find out about the property, the heating you have now and what you’re hoping for.
- On the visit we calculate what every room loses on a cold day, then check the radiators, room for a cylinder and outdoor unit options.
- We send a fixed-price quote that shows the equipment, the grant position and the VAT.
- We fit the outdoor unit and connect it to the heating, hot water and controls.
- Once it’s running correctly, the MCS certificate is issued and we show you the settings.
Preparing for the visit
- Mention any parking restrictions near the property
- Find the manual or the paperwork for the system, if you have it
- Tell us about access, such as roof hatches, high walls or locked plant areas
Getting a price
Quotes don’t take long. Call or email with a few details and we will come back to you the same working day. Where a survey is needed, we arrange a time that suits you.
Read more
Honest limits
Air source heat pumps cannot fix everything, and we will tell you before we start. It does not solve:
- Any gas work on the existing boiler
- Planning approval where permitted development does not apply
- Promising eligibility for the Boiler Upgrade Scheme
If you’re not sure, just ring 07833 053749 or email us and we will give you a straight answer.
Parts of the system we cover
- Air-to-air heat pumps
- Hot water cylinders
- Radiator systems
- Air-to-water heat pumps
- Underfloor heating
- Homes heated by oil, LPG or gas
FAQs for Ripple
Is the coast a problem for outdoor units in Ripple?
It can. Ripple is within about 3 miles of the coast, and salt air speeds up corrosion on outdoor units. We site outdoor units out of the worst of the sea wind where possible and can suggest models with corrosion protection where the manufacturer offers it.
Do you cover smaller places like Ripple?
We do. Villages and hamlets get the same service as the bigger towns. A few photos and the postcode are enough to get things started.
Do I need new radiators for a heat pump?
It depends on each radiator and the room it heats. Heat pumps run at lower flow temperatures, so radiators give out less heat, and the survey checks each one.
Do I need planning permission for a heat pump?
Often not in England, as many heat pumps on houses are permitted development provided the conditions are met. These include an outdoor unit of no more than 1.5 m³, compliance with MCS 020(a), not being used solely for cooling and not being within the curtilage of a listed building.
Is there a Boiler Upgrade Scheme grant for air-to-air?
It can, as long as the system takes over the heating completely. The £2,500 applies when it replaces the fossil-fuel heating, covers the full heating demand, is fitted by an MCS certified installer and serves a home; as an add-on to a boiler it does not qualify.
How much does an air source heat pump cost?
£8,000–£16,000 (0% VAT on homes) for air-to-water, before the grant. The final price depends on the heat loss survey, the radiators and the cylinder, and you get a fixed-price quote.
Can I do the refrigerant work myself?
Anything that involves the refrigerant needs an F-Gas qualified engineer from a certified company. That is a legal requirement, and manufacturers expect it for their warranty too. We can quote for the whole job, from supply to commissioning.
Heat pumps in Ripple: local notes
Ripple is within about 3 miles of the coast. Near the coast, we choose the outdoor unit position with salt-laden wind in mind. Ripple’s centre falls inside a designated conservation area. Historic England lists about 13 buildings and structures within half a mile of the centre of Ripple, including Church of St Mary the Virgin (grade II*). Where a home is affected, the outdoor unit position is settled with the planning team at Dover council, which typically handles Ripple before the heat pump design is finished. About 65% of households live in detached or semi-detached houses, according to the 2021 Census. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.
With Walmer Castle about 1.9 miles east, it’s worth asking whether your own home is listed before planning a heat pump. Period properties close to Church of St Mary the Virgin can suit a heat pump, though insulation and any heritage protection are checked first.
Ripple is about 2 miles south-west of Deal, in Kent. Our engineers cover Ripple for air source heat pumps, along with the rest of Kent. We cover 922 places across Kent. The nearest of our city pages is Eastbourne, around 55 miles from Ripple.
If your postcode is in CT14, you are inside the area we cover. Whether you’re on Mongeham Road, Sunnyside Close and Sutton Lane or anywhere close by, our engineers can take on the work. Places around Ripple that are also on our list: Great Mongeham (1 mile north), Mill Hill (1 mile north-east), Northbourne (2 miles north-west), Sholden Meadows (2 miles north) and Sholden (2 miles north-east). Within a short drive, we also cover Canterbury (13 miles north-west), Margate (12 miles north), Dover (5 miles south-west) and Folkestone (12 miles south-west).
What’s near Ripple
Around Ripple, our work takes us to homes and businesses near Goodwin Academy. The closest station to Ripple is Walmer station, about 1.1 miles east of the centre. Nearby you’ll also find Royal Victoria Hospital (5.5 miles south-west) and Kent Museum of the Moving Image (2.4 miles north-east).
Looking after your system
So the system stays in good health:
- Look at insulation alongside the heat pump
- Find out the grant position at the survey
- File the MCS certificate safely
If you were eligible for a grant, we handle the application and keep you updated since the grant goes through the installer.
Leave space around the outdoor unit. Airflow is what it runs on so keep it unobstructed.
Other services in Ripple
A customer’s words
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead