Surrey · Heat pump installation
Pyle Hill air source heat pumps
Air source heat pumps in Pyle Hill from an F-Gas certified company, with the manufacturer’s warranty terms explained on your quote. We reply to enquiries the same working day.
- Not knowing whether a grant applies
- Working out where a cylinder could go
- Planning and permitted development questions
Air source heat pumps in Pyle Hill, done properly
Air source heat pumps collect heat from outdoor air and bring it inside, using electricity to drive the process. It works on the same principle as air conditioning, run the other way and the Energy Saving Trust notes that air-to-air heat pumps are sometimes referred to as air conditioning. We are often asked to deal with wanting to stop using oil, LPG or gas for heating and ageing boilers that will need replacing, on air-to-air heat pumps, radiator systems and homes heated by oil, LPG or gas.
Space for an outdoor unit is rarely an issue near Pyle Hill, so the design focuses on heat loss and radiators.
For a fault on a system that may still be under warranty, send us the make, model and installation date. We’ll explain how the manufacturer’s terms are likely to apply before anything chargeable is done.
- Location
- Pyle Hill (GU22)
- Region
- Surrey
- Approvals
- NICEIC approved, F-Gas certified, MCS
- Costs
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Price
- Fixed-price quote after a site survey
- Response
- Same working day
- Phone
- 07833 053749
- Last updated
- 30 October 2026
System by system
Heat loss surveys
The survey covers the building fabric and how air moves through it, and the size of each room.
Hot water cylinders
Existing cylinders may not be suitable for a heat pump and we tell you if it needs replacing.
Looking after it afterwards
Here’s the after-treatment advice, in brief:
- Use the settings explained at handover
- Clear leaves and debris from the outdoor unit
- Look at insulation alongside the heat pump
Where we applied for a Boiler Upgrade Scheme grant, we keep you informed through the process, as the installer applies for it.
Keep insulation and draught-proofing in good order, as lower heat loss means the system has less to do.
FAQs for Pyle Hill
Can I get the Boiler Upgrade Scheme grant in Pyle Hill?
Pyle Hill is covered, as the scheme runs across England and Wales. It gives £7,500 towards an air-to-water or ground source heat pump, or £2,500 towards an air-to-air heat pump that replaces the fossil-fuel heating and meets the whole home’s heating need. You do not apply yourself: the MCS certified installer does, which is us.
Do you cover smaller places like Pyle Hill?
Yes, smaller places are covered as well as towns. Visits to smaller places are planned so the engineer arrives with what the job needs.
Do you work on systems someone else installed?
Yes. We start with a proper look and tell you honestly what we find, including anything about the original installation that needs putting right. You get a fixed price before any work goes ahead.
What warranty do I get?
It’s the manufacturer’s warranty, which varies by brand. Daikin, for instance, gives a standard 2 years on split air conditioning and we explain the terms for your brand on the quote.
How much does an air source heat pump cost?
Air-to-water work is in the £8,000–£16,000 range (0% VAT on homes), with any grant still to come off. Where you land depends on the size of heat pump, any radiators that need changing and the hot water cylinder, and air-to-air systems are priced after a survey.
How soon will you get back to me?
You will hear from us the same working day. For a breakdown that cannot wait, call our 24/7 emergency line.
Do you offer emergency call-outs?
Yes, 24/7. When you call, tell us the make, what’s happening and any error code, and we will talk you through the next steps.
Towns and villages near Pyle Hill
What else we do in Pyle Hill
When something else is needed
Air source heat pumps can’t fix everything, and we’ll tell you before work begins. It will not put right:
- Draught-proofing and insulation upgrades
- Getting planning permission or listed building consent on your behalf
- Promising eligibility for the Boiler Upgrade Scheme
If in doubt, call us on 07833 053749 or drop us a line and we will say what we think.
Parts of the system we cover
- Radiator systems
- Air-to-water heat pumps
- Air-to-air heat pumps
- Homes heated by oil, LPG or gas
- Underfloor heating
- Hot water cylinders
What we do, step by step
Anything involving refrigerant is handled by F-Gas qualified engineers, as the law requires, and electrical work is done by us as NICEIC approved contractors. On the day, both are in the same hands. The work takes a few days on site, depending on the cylinder, the radiators and the pipework involved. If a lane or gateway near Pyle Hill is tight for a van, let us know and we’ll plan for it.
- First we talk through the property and the current system.
- We measure heat loss for every room.
- The design covers the heat pump, emitters, hot water and outdoor unit.
- A fixed-price quote explains the cost, the grant position and the VAT.
- Then it’s fitted, commissioned and registered with MCS.
Preparing for the visit
- Give us access to the outside wall, roof or yard where the outdoor unit sits
- Have the make and model of any existing unit to hand
- Tell us about parking and loading
Getting a quote
Need a price for air source heat pumps? Please phone us on 07833 053749 or send an email with a few details about the property. We’ll talk you through the options and give you a fixed-price quote before you commit to anything.
Advice
Air source heat pumps around Pyle Hill
On the National Heritage List, around 7 entries fall within 0.5 miles of the middle of Pyle Hill; Littlewood Cottage (grade II) is one. So the heat pump survey asks two extra questions here: is the home listed, and is it inside a conservation area? About 62% of households live in detached or semi-detached houses, according to Census 2021 figures. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.
For a home near Worplesdon station, the survey looks at whether an air-to-water or air-to-air heat pump suits better. Guildford Castle lies about 3.7 miles south. Owners of listed homes need consent before a heat pump is fitted, so it’s one of our first questions.
Pyle Hill is about 2 miles south of Woking, in Surrey. We cover Pyle Hill for air source heat pumps and across the rest of Surrey. We cover 395 places across Surrey, from busy centres to quieter spots.
The closest recent job we can point to from Pyle Hill was on Goldsworth Road, Woking (GU21), about 2 miles north: installing a Daikin Perfera wall-mounted unit in the open-plan living area.
From Maybourne Rise, Guildford Road and Pyle Hill to the smaller roads in between, the whole area is covered. Work in GU22 follows the same survey, fixed-price quote and written records as everywhere else we cover. Close to Pyle Hill, our area also takes in Mayford (1 mile north-east), Sutton Green (1 mile south-east), Jacobs Well (1 mile south), Send (2 miles east) and Bellfields (2 miles south). We also work in nearby towns such as Guildford (3 miles south), Camberley (7 miles north-west), Epsom (14 miles east) and Farnham (11 miles south-west).
What’s near Pyle Hill
Locally, jobs take us to houses, flats and workplaces close to Drumming Snipe pub, Westfield Primary School and Mayford Meadows and the streets around them. There’s a railway station in Pyle Hill itself: Worplesdon station. A little further out are The Hockey Museum (2.2 miles north) and Woking Community Hospital (2 miles north). Not far away are Pewley Hill and Brookwood Lye.
A customer’s words
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath