Oxfordshire · Heat pump installation
Heat pump installers in Purley on Thames
Air source heat pumps, for Purley on Thames and the surrounding area. Call for a fixed-price quote; we reply the same working day.
- Plans to switch to electric heating with a heat pump
- Questions about the Boiler Upgrade Scheme
- Deciding on the outdoor unit position
Air source heat pumps in Purley on Thames, done properly
An air-to-water heat pump costs £8,000–£16,000 (0% VAT on homes), before the grant. The Boiler Upgrade Scheme can provide £7,500 towards an eligible air-to-water system in England and Wales and the installer makes the application. Eligibility depends on the property, so we confirm it before anything is agreed. The work covers hot water cylinders, air-to-water heat pumps and homes heated by oil, LPG or gas, and people most often call us about working out whether radiators need upsizing and questions about listed buildings or conservation areas.
If your home near Purley on Thames has no mains gas, the grant can be bigger. Homes heated by oil or LPG with no mains gas can get an extra £1,500 on the Boiler Upgrade Scheme until March 2027, for an air source or ground source heat pump.
Warranty on the equipment is the manufacturer’s own, on the manufacturer’s terms, and we set them out on your quote. Each brand sets its own conditions, so we go through them with you rather than leave you to find the small print.
- Location
- Purley on Thames (RG8, RG31, RG4)
- Region
- Oxfordshire
- Replies
- We reply the same working day
- Credentials
- F-Gas certified company, NICEIC approved, MCS
- Costs
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Quote
- Fixed after a survey or pictures
- Telephone
- 07833 053749
- Reviewed
- 30 October 2026
When something else is needed
Some problems need a different service or another trade:
- Grants for hybrid systems or replacements of low-carbon systems
- Any gas work on the existing boiler
- Draught-proofing and insulation upgrades
Not sure which it is? You can ring us on 07833 053749 or use the quote form and we’ll tell you honestly.
Parts of the system we cover
- Air-to-air heat pumps
- Radiator systems
- Homes heated by oil, LPG or gas
- Underfloor heating
- Air-to-water heat pumps
- Hot water cylinders
Why act early in Purley on Thames
Radiators that are too small for a heat pump’s lower flow temperature leave rooms cool. Checking and upsizing them as part of the installation avoids that. Booking before summer means the work near Purley on Thames is done before the hot weather.
Leaving a fault or an overdue service rarely makes the work cheaper. Small problems, from blocked filters to slow leaks, tend to get worse, and a struggling system uses more electricity to do less. If you are unsure, call 07833 053749 or drop us a line and we will give you an honest view and a fixed price.
Why choose AirCon Doctor in Purley on Thames
- MCS certified for heat pumps
- F-Gas company certification
- Emergency calls taken 24/7
- Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba and more
See how installs are priced and our accreditations and certificates.
Also near Purley on Thames
More services for Purley on Thames
How it works
Think of the visit in three stages: diagnose, treat and sign off. First comes a careful look at the system or the space, then we do the work, and finally we test, record and explain. Most of the time goes on the middle part, which takes a few days for most air-to-water installations, with air-to-air systems often quicker. Around Purley on Thames, access is usually simple, though gates and garden access are worth mentioning.
- It starts with a conversation about the home, the existing heating and your plans.
- The survey measures heat loss room by room and looks at radiators, hot water and the best spot for the outdoor unit.
- We send a fixed-price quote that shows the equipment, the grant position and the VAT.
- Installation covers the outdoor unit, the indoor connections and the controls.
- Commissioning, MCS certification and a handover of the controls finish the job.
Before we arrive
- Dig out any previous service or F-Gas records
- Clear access to the fuse board
- Keep pets out of the rooms we are working in
Getting a quote
Quoting starts with a diagnosis, from a site survey or, where the job is straightforward, from photos and measurements. Then you get a fixed price before any work starts.
Related advice
Common questions in Purley on Thames
Do you cover smaller places like Purley on Thames?
Yes, smaller places are covered as well as towns. We are based in East Grinstead and plan each visit so the job can be finished in one trip where possible.
Can I get the Boiler Upgrade Scheme grant in Purley on Thames?
Purley on Thames is in England, where the Boiler Upgrade Scheme runs. The amount depends on the type of heat pump, and the survey confirms which applies. As an MCS certified installer, we apply for it on your behalf.
Do you offer maintenance contracts?
Yes. Tell us what you have and how it’s used, and we’ll suggest a schedule with a fixed price. That can include the leak checks the F-gas rules require for larger systems.
Which manufacturers do you install and repair?
We install and work on the leading makes, including Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. Send us the make and model if you have it.
Do I need to service the system to keep the warranty?
It depends on the manufacturer’s terms. Some manufacturers make regular servicing by a qualified engineer a condition of the warranty, so it’s worth checking. Keep every service record either way.
Why does F-Gas certification matter?
The law says any company working on equipment containing F gas has to be certified, and each engineer needs the right qualifications too. It’s how you know the refrigerant is being handled legally and safely.
Do I need planning permission for a heat pump?
Often not in England, as many heat pumps on houses are permitted development, if the conditions are met. These include an outdoor unit of no more than 1.5 m³, compliance with MCS 020(a), not being used solely for cooling and not being within the curtilage of a listed building.
Air source heat pumps in Purley on Thames: the local picture
On the National Heritage List, around 11 entries fall within 0.5 miles of the middle of Purley on Thames; Mapledurham House (grade I) is one. For a heat pump, permitted development does not apply within the grounds of a listed building, and in a conservation area the outdoor unit cannot go on a wall or roof facing a road, so we check with the planning team at West Berkshire council, which usually handles Purley on Thames where necessary. The last census (2021) found about 79% of households in detached or semi-detached houses. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.
With Mapledurham House about 0.6 miles north-east, it’s worth asking whether your own home is listed before planning a heat pump. Period properties close to Church of St Mary can suit a heat pump, though insulation and any heritage protection are checked first.
Purley on Thames is about 3 miles west of Caversham, in Oxfordshire. Whatever kind of property you have in Purley on Thames, we can help with air source heat pumps. You will hear back from us the same working day, and there’s a 24/7 emergency line. In Oxfordshire alone we list 443 places and Purley on Thames is among them. Our Guildford page covers places nearby, about 26 miles away.
If your postcode is in RG8, RG31 and RG4, the property is within reach. Our engineers work on Glebe Road, Hazel Road and Menpes Road and nearby roads. We also cover Mapledurham (1 mile north-east), Tilehurst (1 mile south), Sulham (1 mile south-west), Little Heath (2 miles south) and Trench Green (2 miles north-east). We also work in nearby towns such as Didcot (12 miles north-west), Henley-on-Thames (7 miles north-east), Benson (10 miles north) and Wallingford (9 miles north-west).
Local landmarks in Purley on Thames
We fit and service air conditioning in homes and premises around Denefield School, Round Copse and Roebuck pub. For rail, the closest station is Tilehurst station, about 1 mile south-east. Other landmarks nearby include Battle Hospital (2.6 miles south-east) and Royal Berkshire Regiment Museum (2.4 miles south-east). The countryside around Purley on Thames includes Hosehill Lake and Moor Copse Nature Reserve.
Owner checks or an engineer?
Never try to top up, release or handle refrigerant yourself. Under the F-gas rules, engineers need their own qualifications and the company must be certified, and escaping refrigerant can cause cold burns. If you suspect a leak, switch the system off and call us.
For air conditioning, cleaning the indoor unit’s filters is the main job owners can do, if the manual says so. With the power off, they lift out, can be vacuumed or rinsed and must be fully dry before they go back. On a heat pump, the equivalent is keeping the outdoor unit clear and checking the controls.
From one of our customers
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead