Kent · Heat pump installation
Heat pump installation in Ospringe, Kent
MCS certified installation of air source heat pumps for heating and hot water, with the boiler upgrade scheme grant applied for, for Ospringe and the surrounding area. Ask us for a fixed-price quote, and we will reply the same working day.
- Choosing between air-to-water and air-to-air
- Finding a place for the outdoor unit
- No space for a hot water cylinder
FAQs for Ospringe
Will you come out to Ospringe?
We do. Villages and hamlets get the same service as the bigger towns. We are based in East Grinstead and plan each visit so the job can be finished in one trip where possible.
Can I get the Boiler Upgrade Scheme grant in Ospringe?
Ospringe is covered, as the scheme runs across England and Wales. The amount depends on the type of heat pump, and the survey confirms which applies. We hold MCS certification, so the application is ours to make for you.
Will my radiators work with a heat pump?
That depends on the room’s heat loss and the radiator’s size. The survey compares each radiator with the room’s needs, so the quote covers any changes.
Does servicing affect my warranty?
It depends on the manufacturer’s terms. Some manufacturers make regular servicing by a qualified engineer a condition of the warranty, so check the terms or ask us. Keep every service record either way.
Can I do the refrigerant work myself?
Anything that involves the refrigerant needs an F-Gas qualified engineer from a certified company. That’s the law, not just our preference, and it also matters for the manufacturer’s warranty. We can quote for the whole job, from supply to commissioning.
Which accreditations do you hold?
F-Gas certified, NICEIC approved and MCS certified for heat pumps, plus Checkatrade membership. Our engineers also hold the individual F-gas qualifications needed to work on refrigerant.
Do I get paperwork after the visit?
Yes. It’s your proof of what was done: the date, the work, and any refrigerant added or recovered.
Air source heat pumps in Ospringe, done properly
We install air source heat pumps in Ospringe and across Kent, and we’re MCS certified. Air-to-water systems feed your radiators or underfloor heating and hot water cylinder, while air-to-air systems heat rooms directly through indoor units and can cool them too. We help you work out which suits your home. The work covers homes heated by oil, LPG or gas, air-to-air heat pumps and hot water cylinders, and the jobs we see most are wanting to stop using oil, LPG or gas for heating and comparing heat pump types.
Whether a home near Ospringe has mains gas makes a difference to the grant. Until March 2027, homes on oil or LPG without mains gas can get an extra £1,500 through the Boiler Upgrade Scheme, for an air source or ground source heat pump.
Some warranty terms depend on the system being serviced regularly by a qualified engineer. Where yours does, a regular service with us keeps that side in order and each visit is recorded.
- Location
- Ospringe (ME13)
- Region
- Kent
- Accreditations
- F-Gas certified company, NICEIC approved, MCS
- Typical price
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Replies
- Same working day
- Price
- Fixed after a survey or pictures
- Phone
- 07833 053749
- Page updated
- 30 October 2026
Air source heat pumps in Ospringe: the local picture
At about 44 miles from central London, Ospringe sits inside the area we cover across London and the South East. The centre of Ospringe lies within the Ospringe Conservation Area. In the mile around Ospringe’s centre, 4 conservation areas have been designated. On the National Heritage List, around 43 entries fall within 0.5 miles of the middle of Ospringe; Church of St Peter and St Paul (grade II*) is one. So the heat pump survey asks two extra questions here: is the home listed, and is it inside a conservation area?
Homeowners near Faversham station often ask whether a heat pump can take over from the boiler, and the heat loss survey answers that.
Ospringe is about 1 mile south-west of Faversham, in Kent. Across the ME13 area, our engineers can take on air source heat pumps. Across Kent, we cover 922 places, and Ospringe is one of them. There’s also a page for Bromley, roughly 38 miles from Ospringe.
Our working area takes in ME13 in full. You will find streets such as Water Lane, Lower Road and Capel Road, and we cover them all. Nearby, we also cover air source heat pumps in Whitehill (1 mile south), Faversham (1 mile north-east), Davington (1 mile north-east), Brogdale (1 mile south) and Preston (1 mile east). Within a short drive, we also cover Maidstone (15 miles west), Ashford (12 miles south), Canterbury (9 miles east) and Sittingbourne (6 miles west).
Near you in Ospringe
Around Ospringe, our work takes us to homes and businesses near Oare Meadow, The Abbey School and Maison Dieu pub, among other places. For rail, the closest station is Faversham station, roughly 0.8 miles east. Nearby you’ll also find Newnham Castle (3.5 miles south-west).
What we’re called out for in Ospringe
People also ask about air-to-air heat pumps because they heat and cool. They warm rooms directly through indoor units, and can cool them when it’s hot. Whether a grant applies depends on the scheme conditions.
What we’re most often called about:
- Deciding on the outdoor unit position
- Questions about the Boiler Upgrade Scheme
- A boiler that is getting old
Live in one of the older houses around Church of St Peter and St Paul? Expect the survey to look closely at heat loss and at the building’s planning status.
What to look for in a quote
- What’s in the price and what isn’t
- Whether they hold F-Gas company certification, not just individual qualifications
- Which VAT rate the quote uses, and why
What owners can safely do
Owner care supports servicing; it does not replace it. Simple care keeps the air moving through the system, but the refrigerant circuit, the electrics and the parts you cannot see still need an engineer at the interval the manufacturer recommends.
Before you call us about a fault, a few checks can save a visit: check the mode, the set temperature, the remote’s batteries and the breaker. If a breaker trips again after you reset it, leave it off and give us a ring on 07833 053749 or email us.
Aftercare tips
Looking after it is simple, and it makes the next visit easier:
- Leave indoor units unobstructed
- Book a yearly service
- Keep the MCS certificate with the manufacturer’s paperwork
Handover includes the controls and how to get the best from a heat pump. Steady running suits a heat pump better than switching on and off so we set the controls up with you.
Leave space around the outdoor unit. Airflow is what it runs on, so keep it clear all year.
What happens on the day
Every visit follows the same order: agree the plan on site, put the dust sheets down, carry out the job, check the system and explain it all to you. On site, the work takes from a couple of days to around a week, depending on the system and how much of the heating changes. Photos of the room and the outside wall help us plan a job near Ospringe.
- We find out about your home and the heating you have now.
- A heat loss survey is carried out, room by room.
- We design the system, check the radiators and cylinder and look at the outdoor unit position.
- You get a fixed price, with any grant and the VAT set out.
- We install, commission and register the system under MCS.
Before we arrive
- Unlock any gate, garage or side passage we need
- Name a contact who can meet us at the agreed time
- Tell us about any building rules, permits or sign-in
Ask for a quote
Quotes don’t take long. Call or email with a few details and we’ll come back to you the same working day. If we need to see the property first, we book a survey at a time that works for you.
Read more
More services for Ospringe
From one of our customers
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath